Clutch cylinder relocation kit for TTE airbox

sprinter2012
Posting Freak

2,484

02-04-2019, 11:18 AM

Part of my plan for the supercharger set up I'm working on is to use a TTE airbox, but I've read that you have to take off the clutch cylinder, and plumb it into the brake cylinder or something like that?

Does anyone have, or know where I can get the kit/parts required to do this?

sprinter2012

02-04-2019, 11:18 AM #1

toxo
Posting Freak

4,843

03-04-2019, 12:59 AM

There are some photos of it somewhere on the thread about Rabster's red IS200.

You keep the clutch cylinder but lose the reservior on top, and take a feed from the brake fluid reservior instead. So it's basically just some hose and fittings!

toxo

03-04-2019, 12:59 AM #2

S
Banned

1,153

03-04-2019, 12:59 AM

Here you go Smile

I asked the same thing when I first got my charger kit.

http://www.outlawjapclub.co.uk/forum/sho...php?t=9975

Order it direct from Toyota, I paid £8, you will also need a length of hose, a T piece and 3 small clamps.

S

03-04-2019, 12:59 AM #3

Here you go Smile I asked the same thing when I first got my charger kit.

http://www.outlawjapclub.co.uk/forum/sho...php?t=9975

Order it direct from Toyota, I paid £8, you will also need a length of hose, a T piece and 3 small clamps.

sprinter2012
Posting Freak

2,484

03-04-2019, 04:50 AM

OJC to the rescue yet again Smile

I'll get one of them ordered up and work out what pipes and stuff I need when it arrives.

sprinter2012

03-04-2019, 04:50 AM #4

OJC to the rescue yet again Smile

I'll get one of them ordered up and work out what pipes and stuff I need when it arrives.

S
Banned

1,153

03-04-2019, 05:43 AM

I'll take a picture of my setup when I get home.

I've got a length of the same pipe I used you can have for postage if you like?

Pm me if you want it or I can just find it on eBay for you.

S

03-04-2019, 05:43 AM #5

I'll take a picture of my setup when I get home.

I've got a length of the same pipe I used you can have for postage if you like?

Pm me if you want it or I can just find it on eBay for you.

sprinter2012
Posting Freak

2,484

03-04-2019, 06:26 AM

That would be great if you could get some pictures, I'll wait and see what exactly needs doing first, as the tube might be something we have at work.

sprinter2012

03-04-2019, 06:26 AM #6

That would be great if you could get some pictures, I'll wait and see what exactly needs doing first, as the tube might be something we have at work.

S
Banned

1,153

03-04-2019, 07:20 AM

No worries, ill take a pic now.

I just searched for oil/fuel pipe.

S

03-04-2019, 07:20 AM #7

No worries, ill take a pic now.

I just searched for oil/fuel pipe.

S
Banned

1,153

03-04-2019, 07:43 AM

Toyota union that deletes the reservoir:

[Image: IMAG0263-1.jpg]

"T'd" into the brake lines:

[Image: IMAG0264.jpg]

Edited 14-05-2012, 05:21 PM by S.

S

03-04-2019, 07:43 AM #8

Toyota union that deletes the reservoir:

[Image: IMAG0263-1.jpg]

"T'd" into the brake lines:

[Image: IMAG0264.jpg]

sprinter2012
Posting Freak

2,484

03-04-2019, 08:18 AM

Aah I see, makes perfect sense now Smile

Cheers for the pictures!

And I'll take you up on the pipe offer too, just let me know what postage will be and I'll PayPal you some monies.

EDIT: Did any of the lines need bleeding after you did this by the way? And does the fluid squirt out when you cut the hoses or if I just hold the ends upwards will it just stay in the pipes?

Edited 14-05-2012, 05:54 PM by sprinter2012.

sprinter2012

03-04-2019, 08:18 AM #9

Aah I see, makes perfect sense now Smile Cheers for the pictures!

And I'll take you up on the pipe offer too, just let me know what postage will be and I'll PayPal you some monies.

EDIT: Did any of the lines need bleeding after you did this by the way? And does the fluid squirt out when you cut the hoses or if I just hold the ends upwards will it just stay in the pipes?

S
Banned

1,153

03-04-2019, 08:56 AM

#10

right ok well ill try and dig the hose out and post it tomorrow and let you know how much it was.

i dont remember but id use pipe clamps anyway! i didnt do anything to bleed the system.

S

03-04-2019, 08:56 AM #10

right ok well ill try and dig the hose out and post it tomorrow and let you know how much it was.

i dont remember but id use pipe clamps anyway! i didnt do anything to bleed the system.

Recently Browsing
1 Guest(s)

Related Threads…

IS300 Airbox
by bounty`

Replies 4
Views 254

11-04-2018, 01:25 AM
Last Post by bounty`