Fog light wiring issues!
Fog light wiring issues!
Sparkystav You could just cheat and run some wires from the stalk to your own relay then directly to the headlights. That way you can get you MOT then sort it out properly.
Sparkystav http://www.bahamutcars.com/workshop/IS_9...=tshwl-rhd - Indicators
http://www.bahamutcars.com/workshop/IS_9...ode=hl-rhd- Headlight control
http://www.bahamutcars.com/workshop/IS_9...-11672.pdf - Connector for them both
Them two should help
Sparkystav You could just cheat and run some wires from the stalk to your own relay then directly to the headlights. That way you can get you MOT then sort it out properly.
Sparkystav http://www.bahamutcars.com/workshop/IS_9...=tshwl-rhd - Indicators
http://www.bahamutcars.com/workshop/IS_9...ode=hl-rhd- Headlight control
http://www.bahamutcars.com/workshop/IS_9...-11672.pdf - Connector for them both
Them two should help
Just fit a separate switch then, as long as its taped down then it should pass
I've no idea how old my post to them links are as I know it's been shut for ages.
Takes up loads of space on my iPad now having the manual on there.
The zip with all the pdfs is in the Files area on the fb IS200 group and I also have it in my dropbox if anyone needs it...
Sparkystav I've no idea how old my post to them links are as I know it's been shut for ages.
DaveEdin The zip with all the pdfs is in the Files area on the fb IS200 group and I also have it in my dropbox if anyone needs it...
Sparkystav I've no idea how old my post to them links are as I know it's been shut for ages.
DaveEdin The zip with all the pdfs is in the Files area on the fb IS200 group and I also have it in my dropbox if anyone needs it...
Ok so I have found this: (if you have the files it's r-05.pdf)
But I think I am a little out of my depth here!
Also, confusingly the wire that is spliced into the red/blue wire on the stalk is connected to "30" on the relay. My limited knowledge of relays tells me that "30" should be the output? I may be barking up the wrong tree! I think I will swap out for another stalk just to sure it's not that before I attempt (and probably fail) to rewire the lights completely.
Rabster Relays can be used as 30 as the input and 87 as the output as it still does the same job
Rabster Relays can be used as 30 as the input and 87 as the output as it still does the same job