is200 tein Coilover bits
is200 tein Coilover bits
I'm happy to sell the coils all built up as a set but the plan is to sell the nice bits off it.
All top mounts are pillow balls with a spherical bearing (can't say I noticed any difference) The front's are standard hence the corrosion although it's not THAT bad, the rears were way worse they crumbled when I took them off.
Locking rings and spring seats are CNC'd out of a thicker ali and a very high grade of ali, they have also been anodized black so they should last years. The thread was M62 x 3mm iirc. It's definitely the 3mm pitch I know that much.
Rear top mounts are also CNC'd and anodized.
Apart from the leaking damper they aren't actually in that bad condition. I did paint them white because they were mega rusty when I got the car. Must have spent 2 days cleaning them up and rebuilding them.
Springs are tapered so I don't think they will fit just any random coilover.
Locking rings and seats £70 I nearly bought some before making them and I think they were around £120 and they are just the standard poor quality cast ones.
Springs x 4 £60
Top mounts x4 £200
everything £330
Paypal or cash on collection. Based in oxford area
![[Image: IMAG0730_zpst6asmsa6.jpg]](http://s1295.photobucket.com/user/toshamov/media/IMAG0730_zpst6asmsa6.jpg.html)
![[Image: IMAG0731_zpsl5wbosef.jpg]](http://s1295.photobucket.com/user/toshamov/media/IMAG0731_zpsl5wbosef.jpg.html)
![[Image: IMAG0732_zpsvnkj64rz.jpg]](http://s1295.photobucket.com/user/toshamov/media/IMAG0732_zpsvnkj64rz.jpg.html)
![[Image: IMAG0728_zps3zbsg8ke.jpg]](http://s1295.photobucket.com/user/toshamov/media/IMAG0728_zps3zbsg8ke.jpg.html)
![[Image: IMAG0729_zpsuwoalmlf.jpg]](http://s1295.photobucket.com/user/toshamov/media/IMAG0729_zpsuwoalmlf.jpg.html)
First off, I don't know what moodel they are, I think they are HR but not sure. They are definitely the old spec. Also one damper is leaking and tein estimated £300 for repair which is just stupid and you would need both doing really.
I'm happy to sell the coils all built up as a set but the plan is to sell the nice bits off it.
All top mounts are pillow balls with a spherical bearing (can't say I noticed any difference) The front's are standard hence the corrosion although it's not THAT bad, the rears were way worse they crumbled when I took them off.
Locking rings and spring seats are CNC'd out of a thicker ali and a very high grade of ali, they have also been anodized black so they should last years. The thread was M62 x 3mm iirc. It's definitely the 3mm pitch I know that much.
Rear top mounts are also CNC'd and anodized.
Apart from the leaking damper they aren't actually in that bad condition. I did paint them white because they were mega rusty when I got the car. Must have spent 2 days cleaning them up and rebuilding them.
Springs are tapered so I don't think they will fit just any random coilover.
Locking rings and seats £70 I nearly bought some before making them and I think they were around £120 and they are just the standard poor quality cast ones.
Springs x 4 £60
Top mounts x4 £200
everything £330
Paypal or cash on collection. Based in oxford area
1 Guest(s)
1 Guest(s)
Views 194
Last Post by
Views 340
Last Post by
Views 252
Last Post by
Views 364
Last Post by
Views 179
Last Post by
Views 1,468
Last Post by
Views 116
Last Post by
Views 227
Last Post by
Views 544
Last Post by