JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Brakes & Suspension Anti Roll Bar drop links

Anti Roll Bar drop links

Anti Roll Bar drop links

Pages (3): Previous 1 2 3
James S
Posting Freak
Find
1,240
25-12-2017, 01:04 AM
#21
So do I try get the mole gribs on the threaded end of the bolt??
The clamps are easy to get off, its just the drop links that are a pain. Have only tried the back on too so far.
Reply
Reply
James S
25-12-2017, 01:04 AM #21

So do I try get the mole gribs on the threaded end of the bolt??
The clamps are easy to get off, its just the drop links that are a pain. Have only tried the back on too so far.

Reply
Reply
Bandit
Posting Freak
Find
6,464
25-12-2017, 01:41 AM
#22
Have a look here matey, it shows you where to use the mole grips CLICK ME?
Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Reply
Reply
Bandit
25-12-2017, 01:41 AM #22

Have a look here matey, it shows you where to use the mole grips CLICK ME?

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

Reply
Reply
ormi
Posting Freak
Find
3,006
25-12-2017, 06:08 AM
#23
cheers bandit thought i done a walk through on how to do them....i done daves every thing went to plan till the 12mm bolts started snapping!!!had to drill them out!!
[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Reply
Reply
ormi
25-12-2017, 06:08 AM #23

cheers bandit thought i done a walk through on how to do them....i done daves every thing went to plan till the 12mm bolts started snapping!!!had to drill them out!!

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

Reply
Reply
FirebirdPhil
Posting Freak
Find
7,101
25-12-2017, 06:15 AM
#24
The bolts that held the anti-roll bar bushes on mine all sheared off, Wayne was not amused.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Reply
Reply
FirebirdPhil
25-12-2017, 06:15 AM #24

The bolts that held the anti-roll bar bushes on mine all sheared off, Wayne was not amused.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

Reply
Reply
Bandit
Posting Freak
Find
6,464
25-12-2017, 07:11 AM
#25
Yeh 2 of mine did too, the 1st i drilled out and the 2nd i gave it a good tap with a chisel to remove the nut, came off very easy and replaced it with a Nyloc nut and bolt :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Reply
Reply
Bandit
25-12-2017, 07:11 AM #25

Yeh 2 of mine did too, the 1st i drilled out and the 2nd i gave it a good tap with a chisel to remove the nut, came off very easy and replaced it with a Nyloc nut and bolt :thumbup1:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

Reply
Reply
James S
Posting Freak
Find
1,240
26-12-2017, 07:29 AM
#26
Hmm...think that i need to try some better mole grips. Smile
What size bolt do I need, i'll replace them if I can get them off.
Reply
Reply
James S
26-12-2017, 07:29 AM #26

Hmm...think that i need to try some better mole grips. Smile
What size bolt do I need, i'll replace them if I can get them off.

Reply
Reply
James S
Posting Freak
Find
1,240
26-12-2017, 07:33 AM
#27
Had no problem with the nuts holding the Arb to the car, itsjust the dam drop links!
Reply
Reply
James S
26-12-2017, 07:33 AM #27

Had no problem with the nuts holding the Arb to the car, itsjust the dam drop links!

Reply
Reply
James S
Posting Freak
Find
1,240
13-01-2018, 10:24 AM
#28
Finally got the rear ARB on Smile Going to try get the front one on this weekend.
Also need to cut my old exhaust bolts off. Working on an old car like mine takes ten times longer because of the rust! LOL!
Reply
Reply
James S
13-01-2018, 10:24 AM #28

Finally got the rear ARB on Smile Going to try get the front one on this weekend.
Also need to cut my old exhaust bolts off. Working on an old car like mine takes ten times longer because of the rust! LOL!

Reply
Reply
Pages (3): Previous 1 2 3
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Eibach/TTE Anti Roll Bar Kit
by John G
Replies 16
Views 1,161
26-03-2017, 01:55 AM
Last Post by edeath
anti roll bar links
by rob
Replies 20
Views 979
14-07-2016, 04:42 AM
Last Post by dimis