JapCarForum Trade Area Trade Archive Selling Archive 20mm wheel spacers for subaru

20mm wheel spacers for subaru

20mm wheel spacers for subaru

spooktoon
Member
77
11-10-2018, 06:18 AM
#1
I have a set of 4 20mm wheel spacers for Subaru. Got brand new nuts to go onto studs, never been used but the spacers have been. Looking for £100 for the lot, they were £160 brand new. These arent just from halfords, if you want pics just ask, as havent taken any yet, just want to get the advert up quickly.

Cheers!!

Car: Toyota Celica 190 [Gen7] (import)
Driver: Luke Morris [Gen1] (home made)


Modifications.....

Car: Read my profile or just ask - people don't talk enough these days..
Driver: Extreme allergy to kryptonite!
spooktoon
11-10-2018, 06:18 AM #1

I have a set of 4 20mm wheel spacers for Subaru. Got brand new nuts to go onto studs, never been used but the spacers have been. Looking for £100 for the lot, they were £160 brand new. These arent just from halfords, if you want pics just ask, as havent taken any yet, just want to get the advert up quickly.

Cheers!!


Car: Toyota Celica 190 [Gen7] (import)
Driver: Luke Morris [Gen1] (home made)


Modifications.....

Car: Read my profile or just ask - people don't talk enough these days..
Driver: Extreme allergy to kryptonite!

Stoney
Posting Freak
2,117
11-10-2018, 06:22 AM
#2
What age Scooby are they for? This is vital, as they changed the PCD at some point. They should suitable for others cars too, I would suspect.

[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:
Stoney
11-10-2018, 06:22 AM #2

What age Scooby are they for? This is vital, as they changed the PCD at some point. They should suitable for others cars too, I would suspect.


[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:

spooktoon
Member
77
11-10-2018, 06:28 AM
#3
I'm guessing one of the latest....basically I got them for my Celica, but the centre is 54.1mm on a Celica and 56.1mm on a Subaru...so i couldnt have spigot rings and causes problems so had to get proper Toyota ones (only bought the wrong ones cos didnt have subaru ones at the time and didnt realise the different PCD).

So its 5x100 with centre hold of 56.1mm.....admittedly could fit other cars BUT watch for the PCD, if its different from the car they are going on.

Car: Toyota Celica 190 [Gen7] (import)
Driver: Luke Morris [Gen1] (home made)


Modifications.....

Car: Read my profile or just ask - people don't talk enough these days..
Driver: Extreme allergy to kryptonite!
spooktoon
11-10-2018, 06:28 AM #3

I'm guessing one of the latest....basically I got them for my Celica, but the centre is 54.1mm on a Celica and 56.1mm on a Subaru...so i couldnt have spigot rings and causes problems so had to get proper Toyota ones (only bought the wrong ones cos didnt have subaru ones at the time and didnt realise the different PCD).

So its 5x100 with centre hold of 56.1mm.....admittedly could fit other cars BUT watch for the PCD, if its different from the car they are going on.


Car: Toyota Celica 190 [Gen7] (import)
Driver: Luke Morris [Gen1] (home made)


Modifications.....

Car: Read my profile or just ask - people don't talk enough these days..
Driver: Extreme allergy to kryptonite!

Stoney
Posting Freak
2,117
12-10-2018, 03:15 AM
#4
spooktoon I'm guessing one of the latest....basically I got them for my Celica, but the centre is 54.1mm on a Celica and 56.1mm on a Subaru...so i couldnt have spigot rings and causes problems so had to get proper Toyota ones (only bought the wrong ones cos didnt have subaru ones at the time and didnt realise the different PCD).

So its 5x100 with centre hold of 56.1mm.....admittedly could fit other cars BUT watch for the PCD, if its different from the car they are going on.

If the PCD is different, they will not fit at all!

Ok, well the latest Scooby ones are 5x114 (since 2006), and all 5x100 before that. I may have been interested if they were 5x114, but no use to me in 5x100, so no use me checking centre bore!

[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:
Stoney
12-10-2018, 03:15 AM #4

spooktoon I'm guessing one of the latest....basically I got them for my Celica, but the centre is 54.1mm on a Celica and 56.1mm on a Subaru...so i couldnt have spigot rings and causes problems so had to get proper Toyota ones (only bought the wrong ones cos didnt have subaru ones at the time and didnt realise the different PCD).

So its 5x100 with centre hold of 56.1mm.....admittedly could fit other cars BUT watch for the PCD, if its different from the car they are going on.

If the PCD is different, they will not fit at all!

Ok, well the latest Scooby ones are 5x114 (since 2006), and all 5x100 before that. I may have been interested if they were 5x114, but no use to me in 5x100, so no use me checking centre bore!


[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 3
Views 197
02-09-2020, 12:47 PM
Last Post by SHAHZ
Replies 0
Views 89
04-08-2020, 07:01 AM
Last Post by john wan
Replies 7
Views 253
03-04-2020, 10:10 AM
Last Post by S
Replies 8
Views 308
22-01-2020, 02:15 PM
Last Post by S
Replies 8
Views 478
22-07-2019, 05:37 PM
Last Post by paddywak
Replies 2
Views 220
31-05-2019, 01:00 AM
Last Post by spooktoon
Replies 0
Views 174
05-05-2019, 03:56 AM
Last Post by daz@likwidart
Replies 1
Views 190
02-05-2019, 09:34 AM
Last Post by daz@likwidart