Help find me the bits to complete the Stagea GTR conversion
Help find me the bits to complete the Stagea GTR conversion
so the finished article will look more or less like this beauty
![[Image: stagea_rt093.jpg]](http://main.superiorimports.se/wp-content/uploads/2009/12/stagea_rt093.jpg)
However i dont have the metal parts shown in the picture below and as such i would like to track them down
![[Image: nengun-3221-03-masamotorsport-m-34rm-34r_gt.png]](http://image.nengun.com/catalogue/350x250/nengun-3221-03-masamotorsport-m-34rm-34r_gt.png)
I have been told they are not 100% necessary but does make fitting the kit a lot easier, newera are unable to help not sure the reason why but suspect its due to it only being a small order etc
so does anyone else on here have any fingers in any pies with importers that can help source the last few bits fr this kit........
OK so after a drive of just under 500 miles at the weekend i have sourced 95% of the Masa Bodykit for my car
so the finished article will look more or less like this beauty
However i dont have the metal parts shown in the picture below and as such i would like to track them down
I have been told they are not 100% necessary but does make fitting the kit a lot easier, newera are unable to help not sure the reason why but suspect its due to it only being a small order etc
so does anyone else on here have any fingers in any pies with importers that can help source the last few bits fr this kit........
Dark Samurai
02-01-2019, 05:44 AM #2So you need the two wings and bonnet, and then like crash bars etc?
I have the following for the conversion already
Wings
Bonnet
Bumper
Headlights
Indicators
Side Skirts
Rear Lip
I dont have any of the metal brackets that will hold it all together, things like
Bonnet hinges
Headlight Brackets
Crash Bar
Bonnet Catch
etc etc
no no no
I have the following for the conversion already
Wings
Bonnet
Bumper
Headlights
Indicators
Side Skirts
Rear Lip
I dont have any of the metal brackets that will hold it all together, things like
Bonnet hinges
Headlight Brackets
Crash Bar
Bonnet Catch
etc etc
![[Image: is200%20catoon.jpg]](http://flq9hg.bay.livefilestore.com/y1pRfa3kPJrnHVEEHC2z47vTNROlbG9FgRzmsEz8ZJ_VKFAF-7kyMer9T68W0uCDsvklEH6MoYkQuRH5knPTs01Eg/is200%20catoon.jpg)
![[Image: 104113415648fa201e2ecb5.gif]](http://i19.photobucket.com/albums/b200/pugtop/104113415648fa201e2ecb5.gif)
![[Image: 91-bluescreen.gif]](http://www.ttp-clan.co.uk/datas/users/91-bluescreen.gif)
Ooh there is a possibility of getting some off the bits i have been told you can make it all fit using skyline parts just with a little bit of work so it could be i find a scrapped skyline and cut the front off and walk away lol
You never know. What was the scrappy that Wayne worked in - they dealt with Jap import scrapping.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
02-01-2019, 07:52 AM #6Problem with that is most crashed ones have front impacts??
You never know. What was the scrappy that Wayne worked in - they dealt with Jap import scrapping.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
i have a contact from a skyline breakers so gonna give him a nudge, see if he can help ideally i wanted the genuine stuff so i know its a bolt on and bolt off system so to speak thus keeping the the time the car is off the road at a minimum
i am up there this weekend. could of saved you a trip lol
i take it you dont need my assistance in getting these bits.
i am up there this weekend. could of saved you a trip lol
1 Guest(s)
1 Guest(s)
Views 539
Last Post by
Views 545
Last Post by
Views 2,156
Last Post by
Views 2,196
Last Post by
Views 1,220
Last Post by