My Nissan Skyline R33 GTS-T
My Nissan Skyline R33 GTS-T
12-08-2016, 01:25 AM
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Cheers matey, still got a long way to go yet? going to see if i can degrease it all today and get rid of the lower dirt thats built up? Plus if i get chance i'll be painting all the metal work under the arches (suspenson etc) to give them a bit of protection
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
12-08-2016, 08:04 AM
Nobody wants me mate, so still looking but starting to get a quite fed up now, and if i'm told i'm over qualified once more i'll scream?
its still really stupid round here at the moment for work and i'm even searching for really **** jobs just so i can get some funds coming in:Sulk:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Cheers Kev :thumbup1: would love to do it as a job
Nobody wants me mate, so still looking but starting to get a quite fed up now, and if i'm told i'm over qualified once more i'll scream? its still really stupid round here at the moment for work and i'm even searching for really **** jobs just so i can get some funds coming in:Sulk:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
12-08-2016, 10:55 AM
Bandit Cheers Kev :thumbup1: would love to do it as a job
cant you stick a wee advert in local papers/on here/any other forums etc ?
I am sure there are people like me that dont have the time /skills required but would still like a decent engine bay to look at when popping the hood ..maybe go round the existing car valet places round your way and offer your services or even better just start up yourself . Maybe offer basic valeting etc first since probably more demand for that. I know up my way every old filling station is now turned into a car wash place. -and they all seem busy enough.Once you get established through word of mouth etc , then specialise in the engine stuff. ??:thumbup:
Bandit Cheers Kev :thumbup1: would love to do it as a job
cant you stick a wee advert in local papers/on here/any other forums etc ?
I am sure there are people like me that dont have the time /skills required but would still like a decent engine bay to look at when popping the hood ..maybe go round the existing car valet places round your way and offer your services or even better just start up yourself . Maybe offer basic valeting etc first since probably more demand for that. I know up my way every old filling station is now turned into a car wash place. -and they all seem busy enough.Once you get established through word of mouth etc , then specialise in the engine stuff. ??:thumbup:
14-08-2016, 03:12 PM
How it was when i first got the car..
![[Image: DSCF3826.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/DSCF3826.jpg)
And Now..
![[Image: DSCF5803.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/DSCF5803.jpg)
![[Image: DSCF5812.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/DSCF5812.jpg)
You can see how clean the plastics have come up today, and most of the metalwork is a lot brighter and cleaner looking?
Fan soaking..
![[Image: DSCF5768.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/DSCF5768.jpg)
After..nice and white
![[Image: DSCF5775.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/DSCF5775.jpg)
Even the washer bottle and brake fluid bottles look nice and white again :thumbup:
Just need to get some nice fine wire brushes now so i can get in all the cracks and tight places and some more tyre foam to make it nice and shiny again
Edited 26-09-2009, 12:49 AM by Bandit.
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Spent 5hrs cleaning dirt off the engine today and quite happy with how its starting to come up? it's quite surprising on how far its come since i first got it?
How it was when i first got the car..
And Now..
You can see how clean the plastics have come up today, and most of the metalwork is a lot brighter and cleaner looking?
Fan soaking..
After..nice and white
Even the washer bottle and brake fluid bottles look nice and white again :thumbup:
Just need to get some nice fine wire brushes now so i can get in all the cracks and tight places and some more tyre foam to make it nice and shiny again
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
14-08-2016, 10:54 PM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
14-08-2016, 10:54 PM #107Getting nice and shiny now ! :thumbup:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
14-08-2016, 11:31 PM
Bobby Tyre foam....what do you do with that....maybe I missed this earlier
Tyre foams great stuff matey :thumbup1:
If you get a can of Autosmart Tyre Dandy (the best i've found for doing it) and spray it on the engine, it usually comes up nice and clean with a bit of a shine to it :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Bobby Tyre foam....what do you do with that....maybe I missed this earlier
Tyre foams great stuff matey :thumbup1:
If you get a can of Autosmart Tyre Dandy (the best i've found for doing it) and spray it on the engine, it usually comes up nice and clean with a bit of a shine to it :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
14-08-2016, 11:36 PM
Bandit If you get a can of Autosmart Tyre Dandy (the best i've found for doing it) and spray it on the engine, it usually comes up nice and clean with a bit of a shine to it :thumbup1:And very easy too ! :thumbup:
I was suprised how little effort you have to put into it for a good finish. So if you do put some effort into it then I'm sure even better results are possible, and Bandit's car probably demonstrates that very nicely !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
14-08-2016, 11:36 PM #109Bandit If you get a can of Autosmart Tyre Dandy (the best i've found for doing it) and spray it on the engine, it usually comes up nice and clean with a bit of a shine to it :thumbup1:And very easy too ! :thumbup:
I was suprised how little effort you have to put into it for a good finish. So if you do put some effort into it then I'm sure even better results are possible, and Bandit's car probably demonstrates that very nicely !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
15-08-2016, 01:12 AM
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
15-08-2016, 01:12 AM #1105 hours thats dedication
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Recently Browsing
9 Guest(s)
9 Guest(s)
Recently Browsing
9 Guest(s)
9 Guest(s)
Related Threads…
Replies 10
Views 871
Views 871
18-03-2023, 01:09 PM
Last Post byFOSSIL FUELS
Last Post by
Replies 15
Views 926
Views 926
09-03-2023, 05:45 AM
Last Post byRabster
Last Post by
Replies 8
Views 807
Views 807
02-01-2023, 11:48 AM
Last Post byLexuspat
Last Post by
Replies 10
Views 992
Views 992
25-11-2022, 01:49 PM
Last Post byLexuspat
Last Post by
Replies 25
Views 2,641
Views 2,641
21-07-2021, 11:48 PM
Last Post byRabster
Last Post by
Replies 18
Views 2,248
Views 2,248
05-02-2021, 02:25 PM
Last Post bySparkystav
Last Post by
Replies 19
Views 1,231
Views 1,231
10-10-2020, 11:18 PM
Last Post bysexttoitami
Last Post by
Replies 102
Views 6,276
Views 6,276
10-06-2020, 10:48 AM
Last Post bySparkystav
Last Post by