JapCarForum Cars, Cars, Cars! Project Cars My new toys

My new toys

My new toys

Pages (177): Previous 1148 149 150 151 152177 Next  
dimis
Posting Freak
3,795
05-09-2022, 05:36 PM
el_bandido Dimis - what mounts/rails are you using?

I have not yet got any rails, but I am thinking to use a set of bride. I will let you know once I have ended up with a solution.

LEXUS IS200 - The most fun car to go sideways
dimis
05-09-2022, 05:36 PM #1,491

el_bandido Dimis - what mounts/rails are you using?

I have not yet got any rails, but I am thinking to use a set of bride. I will let you know once I have ended up with a solution.


LEXUS IS200 - The most fun car to go sideways

el_bandido
Account not Activated
2,757
05-09-2022, 07:25 PM
I used a set of Bride rails with recaro mounts in my car and the seats were ridiculously low; I took them out in the end because it essentially gave me a massive blind spot to my right. I'd have a look at getting a spare set of standard IS200 runners/mounts and modifying them.
el_bandido
05-09-2022, 07:25 PM #1,492

I used a set of Bride rails with recaro mounts in my car and the seats were ridiculously low; I took them out in the end because it essentially gave me a massive blind spot to my right. I'd have a look at getting a spare set of standard IS200 runners/mounts and modifying them.

Sparkystav
Administrator
14,683
06-09-2022, 12:31 AM
You'll find is200 s or altezza ones are too high.
I've got bride ones and I love them.

OutlawJapClub Admin Team
Sparkystav
06-09-2022, 12:31 AM #1,493

You'll find is200 s or altezza ones are too high.
I've got bride ones and I love them.


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
06-09-2022, 03:20 AM
Isn't Dave running Evo seats on modified IS200 runners?
el_bandido
06-09-2022, 03:20 AM #1,494

Isn't Dave running Evo seats on modified IS200 runners?

Sparkystav
Administrator
14,683
06-09-2022, 05:49 AM
Pass I don't know. I know I found it too high when I made some runners from a set of altezza seat rails.

OutlawJapClub Admin Team
Sparkystav
06-09-2022, 05:49 AM #1,495

Pass I don't know. I know I found it too high when I made some runners from a set of altezza seat rails.


OutlawJapClub Admin Team

dimis
Posting Freak
3,795
20-09-2022, 03:31 PM
Well the TRD air bag cancellers arrived finally after 1.5month of waiting. There were lost in the local post office of Australia but luckily they found it! I am offshore currently and guess where -> in Liverpool bay. I am involved in the Westerlink power cable project. Once I will be back I will be doing quite some work on the car.

LEXUS IS200 - The most fun car to go sideways
dimis
20-09-2022, 03:31 PM #1,496

Well the TRD air bag cancellers arrived finally after 1.5month of waiting. There were lost in the local post office of Australia but luckily they found it! I am offshore currently and guess where -> in Liverpool bay. I am involved in the Westerlink power cable project. Once I will be back I will be doing quite some work on the car.


LEXUS IS200 - The most fun car to go sideways

Sparkystav
Administrator
14,683
20-09-2022, 05:42 PM
Not too far from me then!

OutlawJapClub Admin Team
Sparkystav
20-09-2022, 05:42 PM #1,497

Not too far from me then!


OutlawJapClub Admin Team

dimis
Posting Freak
3,795
06-10-2022, 06:43 PM
I returned home on Saturday and today I fitted the carbon fiber bonnet. Actually it is not a TRD version but a rare Eleven nines bonnet. As I mentioned in the past it was painted badly from the previous owner so it needed a lot of work to be done in order to look again. So I took the easy way for start an wrapped it with di-noc glossy and fitted also the Aerocatch hood pins. Well I think the looks of it is much better than I thought. Here are some pics. Let me know what you think. BTW it is lightweight like paper. A lot of weight is reduce by removing the oem bonnet

[Image: 2jd02e8.jpg]

[Image: 2j0y0zk.jpg]

[Image: 2196iqp.jpg]

I will get some better pictures tomorrow in daylight

LEXUS IS200 - The most fun car to go sideways
dimis
06-10-2022, 06:43 PM #1,498

I returned home on Saturday and today I fitted the carbon fiber bonnet. Actually it is not a TRD version but a rare Eleven nines bonnet. As I mentioned in the past it was painted badly from the previous owner so it needed a lot of work to be done in order to look again. So I took the easy way for start an wrapped it with di-noc glossy and fitted also the Aerocatch hood pins. Well I think the looks of it is much better than I thought. Here are some pics. Let me know what you think. BTW it is lightweight like paper. A lot of weight is reduce by removing the oem bonnet

[Image: 2jd02e8.jpg]

[Image: 2j0y0zk.jpg]

[Image: 2196iqp.jpg]

I will get some better pictures tomorrow in daylight


LEXUS IS200 - The most fun car to go sideways

dimis
Posting Freak
3,795
08-10-2022, 12:52 PM
One more picture I took today:

[Image: 2liu69z.jpg]

LEXUS IS200 - The most fun car to go sideways
dimis
08-10-2022, 12:52 PM #1,499

One more picture I took today:

[Image: 2liu69z.jpg]


LEXUS IS200 - The most fun car to go sideways

Moley
Posting Freak
6,230
08-10-2022, 03:54 PM
Looking nice mate. But a bit dull compared to your shiny car

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
08-10-2022, 03:54 PM #1,500

Looking nice mate. But a bit dull compared to your shiny car


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

Pages (177): Previous 1148 149 150 151 152177 Next  
Recently Browsing
 4 Guest(s)
Recently Browsing
 4 Guest(s)