Is200 induction kit?
Is200 induction kit?
davidjamesbattersby
22-11-2018, 12:59 PM #11yea the guy had only used it for a month before he sold his car he sent the origanal reciept with the filter, its like new, i bought all the bits of ebay the seller is mr silicon and i think it will come in at about 130 by the time i have done so very happy compared the full askin price
Well i have had a look on ebay.... for 1m alloy pipe and all the silicon bits (without the reducer for the filter- obviously size of reducer will differ from filter to filter) works out just under £40 will post item numbers up if anyone else needs them.....
davidjamesbattersby
23-11-2018, 10:25 AM #13item numbers are on page one for what you need, just need the filter and the reducer as to the filter to 63mm for the pipe that comes from the 45 degree elbow
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
speedfreek
23-11-2018, 11:04 AM #15Though you also don't need mikalor clamps either. Normal jubilee clamps will do as there is no pressure in the intake system (unless charged, of course.)
[SIZE=3]'93 Mazda Eunos Roadster Turbo[/SIZE]
(Current project)
But you will need almost certainly need the reducer as pretty much every universal filter flange you find including the Apexi one will be 3"/76mm, which will need to be dropped down to 63mm to fit on the tubing.
I've been asked by a few people if I can make these, and I found that it's the filter that makes the most difference in price. All the other parts a readily available, but finding an Apexi filter in UK stock for a good price (I paid £30 for mine) is pretty hard. Most are either in Taiwan or want £80 for a UK stocked one.
sprinter2012
23-11-2018, 11:39 AM #16There's a list of exactly what you need in my thread that was posted up on the first page, where you get the bits from doesn't matter. Mikalor clamps are over the top for an induction kit, jubilee clips are fine, and cheaper too.
But you will need almost certainly need the reducer as pretty much every universal filter flange you find including the Apexi one will be 3"/76mm, which will need to be dropped down to 63mm to fit on the tubing.
I've been asked by a few people if I can make these, and I found that it's the filter that makes the most difference in price. All the other parts a readily available, but finding an Apexi filter in UK stock for a good price (I paid £30 for mine) is pretty hard. Most are either in Taiwan or want £80 for a UK stocked one.
davidjamesbattersby
23-11-2018, 01:41 PM #18i got the Mikalor ones because i like the look of them, does any one know what size the outlet is on the pipercross viper as i need a reducer to take it to the 63 alloy pipe
![[Image: 5ce94446-3a4e-97af.jpg]](http://img.tapatalk.com/5ce94446-3a4e-97af.jpg)
---
I am here: http://maps.google.com/maps?ll=51.391836,-0.198844
Has anyone fitted a k&n Apollo to a 200.
---
I am here: http://maps.google.com/maps?ll=51.391836,-0.198844
1 Guest(s)
1 Guest(s)
Views 127
Last Post by
Views 245
Last Post by
Views 138
Last Post by
Views 143
Last Post by
Views 766
Last Post by
Views 665
Last Post by