My little project - IS200 Turbo
My little project - IS200 Turbo
I can get all the way to rev limit in my car without touching boost because the actuator is driven on a pressure drop, so if you don't open the throttle up much there's no boost!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
24-11-2016, 05:34 AM #412I have a heavy lead foot........
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Moley What colour of hoses you going for Steve and are you using Mikalor clamps also.
Sorry, I forgot to answer this bit. Red hoses. I'm leaving the clamps up to Charlesworth.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
24-11-2016, 07:53 AM #414Moley What colour of hoses you going for Steve and are you using Mikalor clamps also.
Sorry, I forgot to answer this bit. Red hoses. I'm leaving the clamps up to Charlesworth.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
russelllinn
24-11-2016, 08:38 AM #415Tis frustrating eh Steve, let's hope some of the parcels are for you at the P.O. then !!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
30-11-2016, 10:18 AM #416Any news Stevie?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
30-11-2016, 01:11 PM #417I will get an update tomorrow hopefully.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Anyway, the snow has caused a lot of problems with delays. But I just found out there's been a bit of a misunderstanding, they thought I'd bought a runaround for while my IS200 was in there (which was the original plan), and didn't realised I'd been paying for a hire car all this time. Actually they seemed slightly shocked, and are going to try and hassle for all the remaining bits as much as they can now, to get it all back together ASAP. I don't think they were exactly not bothering about my car, as I said the weather really has messed things up, but perhaps they haven't been chasing things up as much as they could have done.
The sump is off at a stove enamellers, being enamelled gloss black apparently (they had to drill into it for oil return pipes etc), and isn't back yet.
They're still waiting for a fitting for the oil feed from the engine, this is being made up (again they will be chasing the guy now).
They were a bit concerned about how to get the fittings for water-cooling the turbo without spending a fortune, but now I've told them this turbo fits on an S14 (200SX), they're hoping they can pick up some standard S14 parts for this (to save a completely custom job !).
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-12-2016, 06:12 AM #419Not much has happened unfortunately, they've still been waiting for some bits. Despite my efforts to provide as much up-front as possible, in hindsight it would have helped for me to provide even more of the parts. Trouble is, the fittings here and there are something that I'd have no idea about, I'd have to get the garage to tell me what is needed, and sometimes that might be tricky before they'd seen all the components themselves (e.g. seeing the turbo with their own eyes to work out what's going to be needed where etc).
Anyway, the snow has caused a lot of problems with delays. But I just found out there's been a bit of a misunderstanding, they thought I'd bought a runaround for while my IS200 was in there (which was the original plan), and didn't realised I'd been paying for a hire car all this time. Actually they seemed slightly shocked, and are going to try and hassle for all the remaining bits as much as they can now, to get it all back together ASAP. I don't think they were exactly not bothering about my car, as I said the weather really has messed things up, but perhaps they haven't been chasing things up as much as they could have done.
The sump is off at a stove enamellers, being enamelled gloss black apparently (they had to drill into it for oil return pipes etc), and isn't back yet.
They're still waiting for a fitting for the oil feed from the engine, this is being made up (again they will be chasing the guy now).
They were a bit concerned about how to get the fittings for water-cooling the turbo without spending a fortune, but now I've told them this turbo fits on an S14 (200SX), they're hoping they can pick up some standard S14 parts for this (to save a completely custom job !).
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
1 Guest(s)
1 Guest(s)
Views 103,312
Last Post by
Views 69,017
Last Post by
Views 405
Last Post by
Views 1,493
Last Post by
Views 3,144
Last Post by