Abs kicking in when brackin at 10mph
Abs kicking in when brackin at 10mph
11-04-2017, 03:02 AM
[SIGPIC][/SIGPIC]
widnes_is200
11-04-2017, 03:02 AM #43glad its sorted! car looks real smart at that hight now john:thumbup1:
[SIGPIC][/SIGPIC]
11-04-2017, 07:04 AM
My dads!
![[Image: car075.jpg]](http://i942.photobucket.com/albums/ad263/Lazyboyo/car075.jpg)
Mine
![[Image: car076.jpg]](http://i942.photobucket.com/albums/ad263/Lazyboyo/car076.jpg)
So i removed the sensor and filled the sensor hole with a glove
![[Image: car078.jpg]](http://i942.photobucket.com/albums/ad263/Lazyboyo/car078.jpg)
1 piece of emery cloth
![[Image: car080.jpg]](http://i942.photobucket.com/albums/ad263/Lazyboyo/car080.jpg)
I then set about cleaning the area around the sensor where the bolt clamps in, this is afterwards
![[Image: car081.jpg]](http://i942.photobucket.com/albums/ad263/Lazyboyo/car081.jpg)
No more pictures after this stage but basically i refitted it and did the same turned out it was just a really tight fit, i slight tap with a mallet! (being carefull not to go to hard) it sat flush, problem solved
![[Image: MySig.jpg]](http://i942.photobucket.com/albums/ad263/Lazyboyo/MySig.jpg)
Here was what i was faced with when i removed my drivers wheel and my dads drivers wheel to compare
My dads!
Mine
So i removed the sensor and filled the sensor hole with a glove
1 piece of emery cloth
I then set about cleaning the area around the sensor where the bolt clamps in, this is afterwards
No more pictures after this stage but basically i refitted it and did the same turned out it was just a really tight fit, i slight tap with a mallet! (being carefull not to go to hard) it sat flush, problem solved
11-04-2017, 08:17 AM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
11-04-2017, 08:17 AM #45Well done, great to have some pics too :thumbup:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)