Cradle?
Cradle?
I'll try and take a pic in of how mines wired in mate, probably be able to see which wires are used without having to take off the ecu cover? :thumbup1: i left the cover on the first time i did it because i couldn't get it off?
After the run to Wales i did last week end i managed 32.7mpg with mine mate, you'll use more buzzing around town as usual but on runs it'll be better as your not having to floor it all the time to get it moving? round town etc i usually get around 28mpg which is about the same as i was getting before i fitted it? :thumbup1:
Here you go mate....this is how mines wired in?
The Red wire from the FCD just T's into the Black with red stripe
The Black wire from the FCD T's into the White wire with Black stripe
The Yellow wire goes towards the ecu to a Green wire with Red stripe, the green wire you have to cut!!
The White wire from the FCD goes away from the ecu to the other end of the Green wire with the Red stripe..
Hopefully that's understandable :biggrin:
Ok Chris I know this is not anything to do with me, but the last two ones didn't really make sense to me?
Quote:thank you so much. That looks a lot better than opening the ECU open. I'll buy you a couple of drinks or some food the next meet we are on. You don't know how much this has helped me out!!
Thanks Bandit
Quote:thank you so much. That looks a lot better than opening the ECU open. I'll buy you a couple of drinks or some food the next meet we are on. You don't know how much this has helped me out!!
Thanks Bandit