1 Days to go! Final Touches
1 Days to go! Final Touches
25-07-2017, 12:59 PM
Dark Samurai
25-07-2017, 12:59 PM #11ah what a bummer, i was gonna say may aswell change as you had the top end off.
25-07-2017, 01:21 PM
Sparkystav Turbo gone mate, Headgasket was fine, but changed it anyway
What had caused the mayonnaise and the overheating of the plastic ball race carrier.
Typical, just days before JAE but sure you will get it done in time mate.
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
Sparkystav Turbo gone mate, Headgasket was fine, but changed it anyway
What had caused the mayonnaise and the overheating of the plastic ball race carrier.
Typical, just days before JAE but sure you will get it done in time mate.
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
25-07-2017, 01:26 PM
Phil01 What had caused the mayonnaise and the overheating of the plastic ball race carrier.
Typical, just days before JAE but sure you will get it done in time mate.
not sure what caused the mayo, thinking either short journeys i've been told it can happen? or the head lifting and mixing fluids.
the carrier melted because of lack of water on run down. caused by the same thing we think maybe.
so uprating and overhauling is the way forward IMHO
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
25-07-2017, 01:26 PM #13Phil01 What had caused the mayonnaise and the overheating of the plastic ball race carrier.
Typical, just days before JAE but sure you will get it done in time mate.
not sure what caused the mayo, thinking either short journeys i've been told it can happen? or the head lifting and mixing fluids.
the carrier melted because of lack of water on run down. caused by the same thing we think maybe.
so uprating and overhauling is the way forward IMHO
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
25-07-2017, 02:01 PM
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
but stav think about it, why do they use a plastic carrier in that harsh environment. Subject to so much heat in operation, then suffering from latent heat exchange when engine shut off. Can you get a modified bearing anywhere, (ceramic)??
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
25-07-2017, 02:07 PM
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
thats a shame mate, but looks like youve got it in hand:thumbup1: hope your turbs gets back in time
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
25-07-2017, 02:28 PM
Phil01 but stav think about it, why do they use a plastic carrier in that harsh environment. Subject to so much heat in operation, then suffering from latent heat exchange when engine shut off. Can you get a modified bearing anywhere, (ceramic)??
It's not the bearing itself its the surrounding or something. I'm not exactly fully ohfaa with it. Need to study the garrett website see if I can provide some more info.
However garrett have been making turbos for years and are well respected so I'm not going to question their design lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
25-07-2017, 02:28 PM #17Phil01 but stav think about it, why do they use a plastic carrier in that harsh environment. Subject to so much heat in operation, then suffering from latent heat exchange when engine shut off. Can you get a modified bearing anywhere, (ceramic)??
It's not the bearing itself its the surrounding or something. I'm not exactly fully ohfaa with it. Need to study the garrett website see if I can provide some more info.
However garrett have been making turbos for years and are well respected so I'm not going to question their design lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
![[Image: 25042008020-1.jpg]](http://i606.photobucket.com/albums/tt150/bigcamy2002uk/25042008020-1.jpg)
25-07-2017, 07:13 PM
[SIGPIC][/SIGPIC]Lexus IS200 Sport
TRD'd, Lowered, 18" Kahn Rep's, K & N, Denso IK20's, 7" JVC DVD & Satnav, Fog 2 Brake, shiney interior bits
SOLD
ad: - Now a German Drug Dealer:biggrin:
Your not shy taking on that work by yourself Stav, but i'm sure you'll get to the back of it bud, hope you have it done in time for JAE, best of luck
[SIGPIC][/SIGPIC]Lexus IS200 Sport
TRD'd, Lowered, 18" Kahn Rep's, K & N, Denso IK20's, 7" JVC DVD & Satnav, Fog 2 Brake, shiney interior bits
SOLD
ad: - Now a German Drug Dealer:biggrin:
Recently Browsing
9 Guest(s)
9 Guest(s)
Recently Browsing
9 Guest(s)
9 Guest(s)
Related Threads…
Replies 15
Views 786
Views 786
04-04-2019, 01:49 PM
Last Post byspikes
Last Post by