Nissan Skyline R33 GTR
Nissan Skyline R33 GTR
02-09-2017, 12:52 AM
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
Nice mate!!
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
02-09-2017, 12:14 PM
Small update...... (with rubbish camera phone pics!!)
Thanks to my mate Paul I now have a boot infill for my spare boot lid for the drag strip.
If you don't know what an infill is I'll explain..... when you remove the spoiler from a boot, the lid sits a couple of inches lower than the rear quarters, see the next picture which shows my spare boot lid minus an infill or spoiler..........
![[Image: EBAY012.jpg]](http://img.photobucket.com/albums/v24/V5MAN/EBAY012.jpg)
![[Image: EBAY017.jpg]](http://img.photobucket.com/albums/v24/V5MAN/EBAY017.jpg)
So, I started by rubbing down the boot lid and the infill, then sprayed them in primer grey.....then when that was dry I sprayed them both matt black
![[Image: Image0062.jpg]](http://img.photobucket.com/albums/v24/V5MAN/Image0062.jpg)
![[Image: Image0060.jpg]](http://img.photobucket.com/albums/v24/V5MAN/Image0060.jpg)
I've stuck the bits together and they're drying, hopefully they'll seal nice and tight.
![[Image: Image0065.jpg]](http://img.photobucket.com/albums/v24/V5MAN/Image0065.jpg)
![[Image: Image0067.jpg]](http://img.photobucket.com/albums/v24/V5MAN/Image0067.jpg)
It's not a great job to be honest, I used too harsh a grade of sandpaper and cocked it up, but as I said, it's just to be used as a drag boot, not show and shine
Thanks again for looking and taking an interest
Small update...... (with rubbish camera phone pics!!)
Thanks to my mate Paul I now have a boot infill for my spare boot lid for the drag strip.
If you don't know what an infill is I'll explain..... when you remove the spoiler from a boot, the lid sits a couple of inches lower than the rear quarters, see the next picture which shows my spare boot lid minus an infill or spoiler..........
So, I started by rubbing down the boot lid and the infill, then sprayed them in primer grey.....then when that was dry I sprayed them both matt black
I've stuck the bits together and they're drying, hopefully they'll seal nice and tight.
It's not a great job to be honest, I used too harsh a grade of sandpaper and cocked it up, but as I said, it's just to be used as a drag boot, not show and shine
03-09-2017, 05:43 AM
Lexusboy Cliff even if its not a great job you know why and now know how to do it better if you ever need too.
Your car looks great what's next?
Yep, exactly, it's all a learning curve
I'll be back out in the garage tonight trying to improve it too What's next? Well, Sunday is the final round of the Pro street drag series (Shakespeare raceway), and so I'll run the car and then retire it for the season until next March/April.
In the meantime I'll be doing a few little projects, things that have been bugging me for a fair while, like....
1. making a removable water tray for the bonnet to stop misfires in wet weather!!!! :Chair:
2. remove sound deadening.
3. remove and polish all wheels
4. remove underseal and re-do after a bodged attempt by a cowboy company!!!
5. remove front bumper, fill holes where cannards were fitted.
6. remove and split headlights, clean insides and reseal.
7. respray off-white drivers front wing.
8. respray rear bumper where heat shield was fitted.
9. set-up coilovers for better stance.
...possibly loads more too!!! :ohmy:
Lexusboy Cliff even if its not a great job you know why and now know how to do it better if you ever need too.
Your car looks great what's next?
Yep, exactly, it's all a learning curve
I'll be back out in the garage tonight trying to improve it too What's next? Well, Sunday is the final round of the Pro street drag series (Shakespeare raceway), and so I'll run the car and then retire it for the season until next March/April.
In the meantime I'll be doing a few little projects, things that have been bugging me for a fair while, like....
1. making a removable water tray for the bonnet to stop misfires in wet weather!!!! :Chair:
2. remove sound deadening.
3. remove and polish all wheels
4. remove underseal and re-do after a bodged attempt by a cowboy company!!!
5. remove front bumper, fill holes where cannards were fitted.
6. remove and split headlights, clean insides and reseal.
7. respray off-white drivers front wing.
8. respray rear bumper where heat shield was fitted.
9. set-up coilovers for better stance.
...possibly loads more too!!! :ohmy:
04-09-2017, 01:54 AM
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
Love this car mate 
05-09-2017, 01:01 PM
Ran 4 times today, got faster every run but was hampered by huge queues!!
Times were:
1st run - 12.11
2nd run - 12.04
3rd run - 11.901
4th run - 11.898
The Skyline performed faultlessly and I was pleased to finish the season with a healthy car and decent times
Some pictures....
![[Image: ShakeyOctober2010008.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/ShakeyOctober2010008.jpg)
![[Image: psdsround520105.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/psdsround520105.jpg)
![[Image: psdsround520108.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/psdsround520108.jpg)
![[Image: psdsround520107.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/psdsround520107.jpg)
![[Image: psdsround520106.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/psdsround520106.jpg)
![[Image: psdsround520103.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/psdsround520103.jpg)
![[Image: psdsround5201013.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/psdsround5201013.jpg)
![[Image: psdsround5201016.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/psdsround5201016.jpg)
![[Image: psdsround5201014.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/psdsround5201014.jpg)
![[Image: psdsround52010.jpg]](http://img.photobucket.com/albums/v24/V5MAN/drag%20series/psdsround52010.jpg)
17th of October 2010 - 5th round of the Pro street drag series - Shakespeare raceway
Ran 4 times today, got faster every run but was hampered by huge queues!!
Times were:
1st run - 12.11
2nd run - 12.04
3rd run - 11.901
4th run - 11.898
The Skyline performed faultlessly and I was pleased to finish the season with a healthy car and decent times
Some pictures....
05-09-2017, 01:47 PM
Love liners when despoilered
Gaz
BHP, TORQUE, UNDER STEER, OVERSTEER FOR DUMMYS
BHP- how fast you hit the wall, TORQUE- how far you push the wall
OVER STEER- Dont see the wall, UNDER STEER- You do see it
1999 Blue IS200 SportTRD kit, K&N Filter
garyskisplym
05-09-2017, 01:47 PM #18Very acceptiable times there.
Love liners when despoilered
Gaz
BHP, TORQUE, UNDER STEER, OVERSTEER FOR DUMMYS
BHP- how fast you hit the wall, TORQUE- how far you push the wall
OVER STEER- Dont see the wall, UNDER STEER- You do see it
1999 Blue IS200 SportTRD kit, K&N Filter
![[Image: clubbanner.gif]](http://www.ranatech.co.uk/evo/clubbanner.gif)
06-09-2017, 08:34 AM
Anees Nice car
How do you find the K-sport 8 pot brakes? Any pics of them?
Suprisingly I don't have any with the wheels off!!! :blink:
I have these though....
With my old Falken 452 tyres....
![[Image: 8pots1.jpg]](http://img.photobucket.com/albums/v24/V5MAN/8pots1.jpg)
![[Image: 8pots2.jpg]](http://img.photobucket.com/albums/v24/V5MAN/8pots2.jpg)
and now with the Toyo R888's :thumbup1:
![[Image: 8pots.jpg]](http://img.photobucket.com/albums/v24/V5MAN/8pots.jpg)
The disks are 356mm and I have DS2500 pads fitted
moke:
Anees Nice car
How do you find the K-sport 8 pot brakes? Any pics of them?
Suprisingly I don't have any with the wheels off!!! :blink:
I have these though....
With my old Falken 452 tyres....
and now with the Toyo R888's :thumbup1:
The disks are 356mm and I have DS2500 pads fitted
moke:
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 10
Views 871
Views 871
18-03-2023, 01:09 PM
Last Post byFOSSIL FUELS
Last Post by
Replies 15
Views 926
Views 926
09-03-2023, 05:45 AM
Last Post byRabster
Last Post by
Replies 8
Views 807
Views 807
02-01-2023, 11:48 AM
Last Post byLexuspat
Last Post by
Replies 10
Views 992
Views 992
25-11-2022, 01:49 PM
Last Post byLexuspat
Last Post by
Replies 25
Views 2,651
Views 2,651
21-07-2021, 11:48 PM
Last Post byRabster
Last Post by
Replies 18
Views 2,251
Views 2,251
05-02-2021, 02:25 PM
Last Post bySparkystav
Last Post by
Replies 19
Views 1,231
Views 1,231
10-10-2020, 11:18 PM
Last Post bysexttoitami
Last Post by
Replies 102
Views 6,276
Views 6,276
10-06-2020, 10:48 AM
Last Post bySparkystav
Last Post by