JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza the car is back

the car is back

the car is back

Pages (5): Previous 1 2 3 4 5 Next
jay_russell
Posting Freak
3,005
02-09-2017, 08:17 AM
#31
i'm running 315cc injectors out of the 1g gte engine i brought. had to make a few adjustments to the head with a dremil but was a great fit with only the smallest amount to trip away. good news is now i can run larger ones that are not for my car so it gives me more options when i'm going to upgrade next year
jay_russell
02-09-2017, 08:17 AM #31

i'm running 315cc injectors out of the 1g gte engine i brought. had to make a few adjustments to the head with a dremil but was a great fit with only the smallest amount to trip away. good news is now i can run larger ones that are not for my car so it gives me more options when i'm going to upgrade next year

LEX11S
Senior Member
287
03-09-2017, 04:23 AM
#32
thats cool i like that :thumbup1:

Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.
LEX11S
03-09-2017, 04:23 AM #32

thats cool i like that :thumbup1:


Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.

steviewevie
Posting Freak
7,993
10-09-2017, 10:27 AM
#33
jay_russell well i tried that sort of thing and as i was getting 236 from standard injectors (150cc) then with my set up i might push the 400 bhp with 315cc that i have now

Standard IS200 injectors are 210cc, as far as I'm aware.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
10-09-2017, 10:27 AM #33

jay_russell well i tried that sort of thing and as i was getting 236 from standard injectors (150cc) then with my set up i might push the 400 bhp with 315cc that i have now

Standard IS200 injectors are 210cc, as far as I'm aware.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

jay_russell
Posting Freak
3,005
10-09-2017, 10:37 AM
#34
nope 155 mate.

http://www.lextreme.com/Injector%20data.htm
steviewevie
Posting Freak
7,993
10-09-2017, 12:12 PM
#35
jay_russell nope 155 mate.

http://www.lextreme.com/Injector%20data.htm

ok, that doesn't make sense though compared to the IS200 technical manual, unless I'm misunderstanding something.

Take a look at http://bahamutcars.free.fr/workshop/IS_9...i_0023.pdf , specifically point 1(n).

This is the section on checking the correct operation of the injectors. The range of tolerance they give there is between 47 and 58 cm3 in 15 seconds. If you multiply that by four to give the rate per minute, that is between 188 and 232 cm3 per minute. So they surely can't be 155 injectors ? 210 is exactly half way between 188 and 232.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
10-09-2017, 12:12 PM #35

jay_russell nope 155 mate.

http://www.lextreme.com/Injector%20data.htm

ok, that doesn't make sense though compared to the IS200 technical manual, unless I'm misunderstanding something.

Take a look at http://bahamutcars.free.fr/workshop/IS_9...i_0023.pdf , specifically point 1(n).

This is the section on checking the correct operation of the injectors. The range of tolerance they give there is between 47 and 58 cm3 in 15 seconds. If you multiply that by four to give the rate per minute, that is between 188 and 232 cm3 per minute. So they surely can't be 155 injectors ? 210 is exactly half way between 188 and 232.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

steviewevie
Posting Freak
7,993
10-09-2017, 12:16 PM
#36
I just noticed that in the same section on that table from lextreme.com, they have an entry for another sky blue coloured injector of 213 cc. That sounds more like it, I wonder if they have the 1G-FE and 3F-E labels for sky blue injectors the wrong way round ?

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
10-09-2017, 12:16 PM #36

I just noticed that in the same section on that table from lextreme.com, they have an entry for another sky blue coloured injector of 213 cc. That sounds more like it, I wonder if they have the 1G-FE and 3F-E labels for sky blue injectors the wrong way round ?


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

steviewevie
Posting Freak
7,993
10-09-2017, 12:18 PM
#37
I really wish we had an edit button again !

Anyway, I also noticed it says the sky blue injectors have 1 or 2 holes. The IS200 1G-FE injector has 4 holes.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
10-09-2017, 12:18 PM #37

I really wish we had an edit button again !

Anyway, I also noticed it says the sky blue injectors have 1 or 2 holes. The IS200 1G-FE injector has 4 holes.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Sparkystav
Administrator
14,683
10-09-2017, 07:57 PM
#38
Sparkystav lol i'm trying to find a link where basically a guy strapped a massive turbo to the engine and was running 700bhp!

Found it at last!!

http://autospeed.com/cms/A_108678/article.html

OutlawJapClub Admin Team
Sparkystav
10-09-2017, 07:57 PM #38

Sparkystav lol i'm trying to find a link where basically a guy strapped a massive turbo to the engine and was running 700bhp!

Found it at last!!

http://autospeed.com/cms/A_108678/article.html


OutlawJapClub Admin Team

dimis
Posting Freak
3,795
10-09-2017, 09:47 PM
#39
steviewevie Standard IS200 injectors are 210cc, as far as I'm aware.

Stevie standard IS200 injectors are 155cc not 210cc, have a look here:

http://shed51.com/injectors.htm

LEXUS IS200 - The most fun car to go sideways
dimis
10-09-2017, 09:47 PM #39

steviewevie Standard IS200 injectors are 210cc, as far as I'm aware.

Stevie standard IS200 injectors are 155cc not 210cc, have a look here:

http://shed51.com/injectors.htm


LEXUS IS200 - The most fun car to go sideways

dimis
Posting Freak
3,795
10-09-2017, 09:51 PM
#40
1GFE uses Denso injectors which are violet

LEXUS IS200 - The most fun car to go sideways
dimis
10-09-2017, 09:51 PM #40

1GFE uses Denso injectors which are violet


LEXUS IS200 - The most fun car to go sideways

Pages (5): Previous 1 2 3 4 5 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 3
Views 344
20-03-2019, 09:50 AM
Last Post by parthiban
Replies 25
Views 1,589
27-01-2018, 10:18 AM
Last Post by jimxms
Replies 61
Views 3,493
17-01-2018, 04:49 AM
Last Post by jimxms
Replies 16
Views 874
26-12-2017, 11:11 AM
Last Post by Rabster
Replies 10
Views 551
23-09-2017, 05:01 AM
Last Post by Phil01
Replies 12
Views 586
28-06-2017, 12:20 PM
Last Post by Fry-Up
Replies 17
Views 810
01-03-2017, 10:30 PM
Last Post by steviewevie
Replies 9
Views 622
07-06-2016, 07:01 AM
Last Post by Saraj
Replies 3
Views 264
31-05-2016, 08:05 AM
Last Post by Saraj