Winter Projects
Winter Projects
18-09-2017, 11:13 PM
My plans are underway, ARB's, front end body work, some A/V work I am starting next week. Wheels are getting re-furbed too. And depending on cash flow, getting some secret-ish stuff done to the engine. But that depends on whether I decide whether in the long term if will do an engine swap. So hoping for big things next year!!!!
Stav would it not be worth stripping your new engine down and building it with a fully forged set up?? Just seems a lot of work to do just to re-build it in the future....seems to me like you will end up doing it at some point. Even if it takes you 12months coz of the extra cost, surely your current engine will hold up that long??
My plans are underway, ARB's, front end body work, some A/V work I am starting next week. Wheels are getting re-furbed too. And depending on cash flow, getting some secret-ish stuff done to the engine. But that depends on whether I decide whether in the long term if will do an engine swap. So hoping for big things next year!!!!
18-09-2017, 11:56 PM
James S Stav would it not be worth stripping your new engine down and building it with a fully forged set up?? Just seems a lot of work to do just to re-build it in the future....seems to me like you will end up doing it at some point. Even if it takes you 12months coz of the extra cost, surely your current engine will hold up that long??
You don't really need to go fully forged on the 1G-GTE unless you want to start pushing it over 500 bhp ... :biggrin:
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
18-09-2017, 11:56 PM #14James S Stav would it not be worth stripping your new engine down and building it with a fully forged set up?? Just seems a lot of work to do just to re-build it in the future....seems to me like you will end up doing it at some point. Even if it takes you 12months coz of the extra cost, surely your current engine will hold up that long??
You don't really need to go fully forged on the 1G-GTE unless you want to start pushing it over 500 bhp ... :biggrin:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
19-09-2017, 12:38 AM
steviewevie You don't really need to go fully forged on the 1G-GTE unless you want to start pushing it over 500 bhp ... :biggrin:
Stevie has a point there, no need to spent loads of money unless if you want push over 500bhp, but then it would be better to fit a 1JZGTE or 2JZGTE engine
LEXUS IS200 - The most fun car to go sideways
steviewevie You don't really need to go fully forged on the 1G-GTE unless you want to start pushing it over 500 bhp ... :biggrin:
Stevie has a point there, no need to spent loads of money unless if you want push over 500bhp, but then it would be better to fit a 1JZGTE or 2JZGTE engine
LEXUS IS200 - The most fun car to go sideways
19-09-2017, 01:45 AM
quick run down on some
Refurb and fit new Brembo brakes
Fit new wiring for all Hid Ballasts
start Wire tuck
Fit Car pc mk 4
finish designing push start mk5
build new engine
i have lots of projects on the go at the moment some of which i have mentioned some i have not lol
quick run down on some
Refurb and fit new Brembo brakes
Fit new wiring for all Hid Ballasts
start Wire tuck
Fit Car pc mk 4
finish designing push start mk5
build new engine
19-09-2017, 01:47 AM
Rabster i have lots of projects on the go at the moment some of which i have mentioned some i have not lol
quick run down on some
Refurb and fit new Brembo brakes
Fit new wiring for all Hid Ballasts
start Wire tuck
Fit Car pc mk 4
finish designing push start mk5
build new engine
^^^^^^^
Looks like i'd better get a shift on with the rocker cover then :laugh:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Rabster i have lots of projects on the go at the moment some of which i have mentioned some i have not lol
quick run down on some
Refurb and fit new Brembo brakes
Fit new wiring for all Hid Ballasts
start Wire tuck
Fit Car pc mk 4
finish designing push start mk5
build new engine
^^^^^^^
Looks like i'd better get a shift on with the rocker cover then :laugh:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
19-09-2017, 02:48 AM
Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).
Fitted new rear Arb yesterday. Got engine mounts to fit, along with Oil change and some smaller bits and bobs. That'll be done next weekend so then time for a new idea lol.
Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).
19-09-2017, 06:58 AM
James S Stav would it not be worth stripping your new engine down and building it with a fully forged set up?? Just seems a lot of work to do just to re-build it in the future....seems to me like you will end up doing it at some point. Even if it takes you 12months coz of the extra cost, surely your current engine will hold up that long??
Well i just want a safer engine to be able to hammer and maybe get a little more power from.
remember as well i will have the engine i take out still
and no rush to put that in so the sky could be the limit for it.Your engine plans sound very interesting!
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
19-09-2017, 06:58 AM #20James S Stav would it not be worth stripping your new engine down and building it with a fully forged set up?? Just seems a lot of work to do just to re-build it in the future....seems to me like you will end up doing it at some point. Even if it takes you 12months coz of the extra cost, surely your current engine will hold up that long??
Well i just want a safer engine to be able to hammer and maybe get a little more power from.
remember as well i will have the engine i take out still
and no rush to put that in so the sky could be the limit for it.Your engine plans sound very interesting!
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Recently Browsing
3 Guest(s)
3 Guest(s)
Recently Browsing
3 Guest(s)
3 Guest(s)
Related Threads…
Replies 0
Views 102
Views 102
29-09-2019, 10:08 AM
Last Post byJonPowellDJ
Last Post by
Replies 3
Views 834
Views 834
30-10-2018, 01:04 PM
Last Post byJonPowellDJ
Last Post by
Replies 3
Views 273
Views 273
06-10-2018, 03:38 PM
Last Post byclossie
Last Post by
Replies 70
Views 2,363
Views 2,363
06-10-2018, 12:06 PM
Last Post byJust-Phil
Last Post by
Replies 16
Views 599
Views 599
06-11-2016, 01:10 PM
Last Post bydimis
Last Post by