Generic Push Start Button & Proximity Entrance
Generic Push Start Button & Proximity Entrance
As discussed a lot of you would like to see this system in the flesh and know how easy it is to install, so i went ahead and got 2 kits, to be experimented on 2 different types of set ups
So here is the good news
they are here in my flat ready to rock and roll
![[Image: 50e9ffde.jpg]](http://i332.photobucket.com/albums/m330/Rabster_2008/New%20Push%20Button/50e9ffde.jpg)
![[Image: ab3a8ef8.jpg]](http://i332.photobucket.com/albums/m330/Rabster_2008/New%20Push%20Button/ab3a8ef8.jpg)
![[Image: 3eee3432.jpg]](http://i332.photobucket.com/albums/m330/Rabster_2008/New%20Push%20Button/3eee3432.jpg)
![[Image: b4d52cd3.jpg]](http://i332.photobucket.com/albums/m330/Rabster_2008/New%20Push%20Button/b4d52cd3.jpg)
If i get a chance this weekend i will get the push start part of the system installed so you can all see that running the proximity bit needs a bit of research as i have an after market alarm.
If i can however Fit this into mine then all those with After market alarms on any vehicle will be able to do the same.
I will do a full write up and picture install thread on this kit once it has been evaluated.
OK well this is following on from the group buy here
As discussed a lot of you would like to see this system in the flesh and know how easy it is to install, so i went ahead and got 2 kits, to be experimented on 2 different types of set ups
So here is the good news
they are here in my flat ready to rock and roll
If i get a chance this weekend i will get the push start part of the system installed so you can all see that running the proximity bit needs a bit of research as i have an after market alarm.
If i can however Fit this into mine then all those with After market alarms on any vehicle will be able to do the same.
I will do a full write up and picture install thread on this kit once it has been evaluated.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
17-12-2017, 12:54 PM #5I pretty sure it can be Oli.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
That looks like a lot of hard work to wire in 
Either way interested to see how this progresses :biggrin:
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
So is this the proper system out of Toyotas, or is it just the switch and the rest is aftermarket?
Either way interested to see how this progresses :biggrin:
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
18-12-2017, 03:21 AM #9im interested too lets see how this works
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
I first installed the item as single button use
This means that you have to hold down the button in order to start the car (not much fun)
however it worked
I then moved onto the Tach sensing part of the circuit very awkward to program instructions not that clear, once done works a treat
i spotted a down side however without the Keyless part installed the system requires the button to be grounded to activate now if you ground it permenatly, car wont start if the imobiliser is still activated. however i worked a way round this on mine that im sure can be developed on a standard car...
the following is how i have set up and configured in my car this is using an aftermarket alarm and imobiliser. not using the keyless system at the moment.
Rabster IS200 2002 turbo with CLifford Avantguard 5.5 Security System
Starting Car
Step one: Aproach Car and unlock using G5 Remote (start switch illuminates)
Step Two: Open Car door Get in
Step three: PLace foot on brake Pedal (start switch will be flashing amber now)
Step Four: press Start button once (engine will start)
Step Five: remove foot from brake pedal
To turn off Car
Step one: PLace foot on brake pedal
Step two: Press and hold Start switch till engine stops
Ok well we have success
I first installed the item as single button use
This means that you have to hold down the button in order to start the car (not much fun)
however it worked
I then moved onto the Tach sensing part of the circuit very awkward to program instructions not that clear, once done works a treat
i spotted a down side however without the Keyless part installed the system requires the button to be grounded to activate now if you ground it permenatly, car wont start if the imobiliser is still activated. however i worked a way round this on mine that im sure can be developed on a standard car...
the following is how i have set up and configured in my car this is using an aftermarket alarm and imobiliser. not using the keyless system at the moment.
Rabster IS200 2002 turbo with CLifford Avantguard 5.5 Security System
Starting Car
Step one: Aproach Car and unlock using G5 Remote (start switch illuminates)
Step Two: Open Car door Get in
Step three: PLace foot on brake Pedal (start switch will be flashing amber now)
Step Four: press Start button once (engine will start)
Step Five: remove foot from brake pedal
To turn off Car
Step one: PLace foot on brake pedal
Step two: Press and hold Start switch till engine stops
1 Guest(s)
1 Guest(s)
Views 635
Last Post by
Views 1,203
Last Post by