Dash Removal
Dash Removal
It happend a while back and i thought i'd fixed it by removing all the fuses and connectors, drying them off and sealing round the bottom of the windscreen, where the rubber had perished. Iv'e had the car washed plenty of times since and the weather has been bad, so i thought i'd sorted it, until yesterday, when it started to do the same thing.
Obviousley the leak is somewhere else, so im thinking of taking out the dash so i can have a proper look or any other sugestions would be much appreciated.
Thanks.
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
Evening folks, how hard would it be to remove my dash ? The reason im asking is that the dreaded alarm going off, petrol gauge light flashing, E showing on the temp gauge etc.
It happend a while back and i thought i'd fixed it by removing all the fuses and connectors, drying them off and sealing round the bottom of the windscreen, where the rubber had perished. Iv'e had the car washed plenty of times since and the weather has been bad, so i thought i'd sorted it, until yesterday, when it started to do the same thing.
Obviousley the leak is somewhere else, so im thinking of taking out the dash so i can have a proper look or any other sugestions would be much appreciated.
Thanks.
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
While its out you can paint the scratched bits - if there any.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
28-01-2018, 08:47 AM #2Its not a 10 min job, as it is very well screwed together!!
While its out you can paint the scratched bits - if there any.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Mine was a nightmare as i have extra wires everywhere.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
28-01-2018, 08:57 AM #3It can be done, if everything is standard then about 2-3hours i reckon to get it out carefully.
Mine was a nightmare as i have extra wires everywhere.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav It can be done, if everything is standard then about 2-3hours i reckon to get it out carefully.
Mine was a nightmare as i have extra wires everywhere.
Imagen what Rabsters is like then!!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
28-01-2018, 08:59 AM #4Sparkystav It can be done, if everything is standard then about 2-3hours i reckon to get it out carefully.
Mine was a nightmare as i have extra wires everywhere.
Imagen what Rabsters is like then!!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
I think this is the only to find the leak but i'm not too confident :crying:
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
well the windscreen will be bonded in so if there was a leak through there it would have been doing it from the start either when the screen was replaced or from factory the rubber is just cosmetic
1 Guest(s)
1 Guest(s)
Views 236
Last Post by
Views 467
Last Post by
Views 1,221
Last Post by