IS200 Sold Today
IS200 Sold Today
This car has been faultless and never let me down, a true testimony to what a great little car the IS200 really is. It has been a pleasure to work on and the knowledge base here at the OJC for this particular model is second to none.
So she will be well looked after and anyone living around the Basingstoke area may see her out and about very soon.:thumbup:
Here's one last pic:
![[Image: 394370796.jpg]](http://pic50.picturetrail.com/VOL482/3191867/22382099/394370796.jpg)
I will have a few IS200 parts up for sale very soon too........Brand new TTE bumper which I bought from Chris prior to finding another already sprayed one that was fitted to the car for example.
Keith:thumbup:
Well after 5 1/2 years of owning and modding my IS200 Sport, she finally went to her new owner today. I didn't even have to advertise her because a guy who does contract work at the fire station had his eye on her for over a year, used to look her over in the station car park.
This car has been faultless and never let me down, a true testimony to what a great little car the IS200 really is. It has been a pleasure to work on and the knowledge base here at the OJC for this particular model is second to none.
So she will be well looked after and anyone living around the Basingstoke area may see her out and about very soon.:thumbup:
Here's one last pic:
I will have a few IS200 parts up for sale very soon too........Brand new TTE bumper which I bought from Chris prior to finding another already sprayed one that was fitted to the car for example.
Keith:thumbup:
Have you pointed the new owner in the OJC direction (would be the polite thing to do) :lol:
Now...... Let's see what you've got! I sense vultures circling already :thumbup:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Sad to see it go... but good that you found a buyer easily Keith!
Have you pointed the new owner in the OJC direction (would be the polite thing to do) :lol:
Now...... Let's see what you've got! I sense vultures circling already :thumbup:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
So what have you bought to replace it ??
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
A very sad day Keith :mellow:
So what have you bought to replace it ??
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
With the TTE bumpers you usually have to cut out the headlight washers anyway Dean - Phil could just disconnect them and not cut the holes in the bumper - keeps the clean look as well
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
TTE Bumpers look best anyways :wink:
Keith are you replacing the IS200 with a different second car, or are you going to just stick with the IS250 now?
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
No worries Phil, I remember the 5 or 6 discs the rubbish wee dremel I bought for the job went through as Ormi was cutting out the washer holes... Seems logical just to not use the headlight washers and not cut the holes
TTE Bumpers look best anyways :wink:
Keith are you replacing the IS200 with a different second car, or are you going to just stick with the IS250 now?
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Gord MOT fail as phils car has HID's as standard so needs the washer jets, but as you say all phil needs to do is cut the right size hole :p
Gord of course mate, well remembered. get the body shop to cut the holes before he paints it, thats if I get an option to buy it,
Gord MOT fail as phils car has HID's as standard so needs the washer jets, but as you say all phil needs to do is cut the right size hole :p
Gord of course mate, well remembered. get the body shop to cut the holes before he paints it, thats if I get an option to buy it,
cared:cared:cared:The brand new TTE bumper I have does not have the washer holes, however it is marked out on the underside if the holes need to be cut. The one I fitted had the holes and I fitted the washers but it was a pain to do, and in all honesty I think I prefer the seamless look of not having washers.
Keith
I'm just running with the IS250 now, can't afford two motors :w00t: Now to see if I can get back some of the insurance money.......The IS200 was insured 6 weeks ago, but I will only get 50% of the premium back now because the policy ran for more than a month.........I know it's bo11ox, £300 for 6 weeks insurance!!!!!!cared:cared:cared:
The brand new TTE bumper I have does not have the washer holes, however it is marked out on the underside if the holes need to be cut. The one I fitted had the holes and I fitted the washers but it was a pain to do, and in all honesty I think I prefer the seamless look of not having washers.
Keith
1 Guest(s)
1 Guest(s)
Views 303
Last Post by
Views 1,110
Last Post by
Views 67
Last Post by
Views 497
Last Post by
Views 263
Last Post by
Views 805
Last Post by
Views 2,213
Last Post by