IS200 Decat Manifold
IS200 Decat Manifold
sprinter2012
11-02-2018, 05:21 PM #1As the title suggests, looking for a decatted manifold prefferably in stainless steel for an IS200.
Gord Do your own for 1/2 the price :thumbup:
i asked my local powerflow dealer if he could do it, but he sounded unsure as to whether or not it was something he could do. but he said bring it in and he will have a look.
do you know of anyone on here who has got their standard manifold decatted?
sprinter2012
16-02-2018, 10:57 AM #2Gord Do your own for 1/2 the price :thumbup:
i asked my local powerflow dealer if he could do it, but he sounded unsure as to whether or not it was something he could do. but he said bring it in and he will have a look.
do you know of anyone on here who has got their standard manifold decatted?
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Mines got the standard manifold fitted that's had the cats removed, not that hard to do mate, need to remove the outer heat shields, cut a door in the manifolds (both sides) and knock out the cats, give them a good blow out and fold the doors closed again, and re-weld them, then replace the heat shields :thumbup1: if the powerflow dealer can't do it, he's in the wrong businesses :laugh: :laugh:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
also, do the heat shields need to go back on after? I thought they were only there to keep the cats hot?
sprinter2012
16-02-2018, 11:05 AM #4good stuff, ill suggest that when i see him.
also, do the heat shields need to go back on after? I thought they were only there to keep the cats hot?
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Not sure to be honest mate, no harm leaving them on though i'd have thought? mine still has them fitted, they just need to have the clips bent back on them to remove them so you could leave them off if you wanted to?
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
sprinter2012
16-02-2018, 11:26 AM #6I'll see what he says, if he charges me less to leave them off then so be it. Plus it will save weight...:whistling: Cheers for the help.
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
The covers are only a tin like metal mate, and they come off very easy, just have to slide a flat blade screwdriver under the edge of the tabs down one side of them and bend them back, and they should come apart :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
16-02-2018, 12:53 PM #8You can just cut the cats out and weld a straight pipe in as a replacement, that could be easier and cheaper?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
sprinter2012
17-02-2018, 08:23 AM #9I'll suggest both methods and see what he thinks. If I get them cut out, would they be worth anything as scrap? Seeing as they are full of precious metals?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
17-02-2018, 08:47 AM #10worth taking them to the scrap yard and asking i suppose
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
1 Guest(s)
1 Guest(s)
Views 87
Last Post by
Views 168
Last Post by
Views 98
Last Post by
Views 99
Last Post by
Views 577
Last Post by
Views 526
Last Post by