Anyone fancy a group buy on aluminium radiator cooling panels?
Anyone fancy a group buy on aluminium radiator cooling panels?
25-02-2018, 11:44 AM
blue engine bay will look good I think, I've been contemplating painting the towers on my strut brace blue.
sprinter2012
25-02-2018, 11:44 AM #32haha, ill see if my local asda have them.
blue engine bay will look good I think, I've been contemplating painting the towers on my strut brace blue.
26-02-2018, 10:50 AM
The way i see it, the airflow on the n/a panel goes like this:
![[Image: l_untitled_1.jpg]](http://i2.sqi.sh/s_1/75E/l_untitled_1.jpg)
(blue) air comes in directly between the bonnet and the 'flap' lifts the air and directs it over the hole into the air intake.
(red) additional air that comes in from the lower part of the bumper and bounces off the radiator (too much airflow) is pushed upwards through the hole in the cooling panel, and joins the rest of the air.
I could be wrong, but with the holes in the panel, you'll be loosing half of your airflow through the holes? For it to really work you'd need both the holes and the flap. Which of course would mean welding on the flap I think.
Nice idea with the holes in the panel, but I think it may be counter productive mate?
The way i see it, the airflow on the n/a panel goes like this:
(blue) air comes in directly between the bonnet and the 'flap' lifts the air and directs it over the hole into the air intake.
(red) additional air that comes in from the lower part of the bumper and bounces off the radiator (too much airflow) is pushed upwards through the hole in the cooling panel, and joins the rest of the air.
I could be wrong, but with the holes in the panel, you'll be loosing half of your airflow through the holes? For it to really work you'd need both the holes and the flap. Which of course would mean welding on the flap I think.
26-02-2018, 11:06 AM
[SIZE="1"]Lexus IS300 Navigator
Engine: ITG ProFilter, Joe-Z Intake Pipe, Custom HKS Super Drager Exhaust, TRD Oil & Rad Cap & Grounding Kit
Suspension: BC Racing Coilovers, Hotchkis ARB's, Chassis Braces & WIM Geometry
Wheels: 18" OZ Ultraleggera & Falken ZE912 Tyres
Styling: Seibon Carbon Fibre Bonnet, Figs Bonnet Struts, Sports Grill, Repositioned Horns & SS Dials
ICE: JVC KW-AVX720 HU, Hifonics ZXI 6410 Amp, MB Quart RUA 216 2-Way Components, StealthBoXz with Infinity 12" Sub & Reverse Camera[/SIZE]
alamkhan3980
26-02-2018, 11:06 AM #36I am interested in a black one.
[SIZE="1"]Lexus IS300 Navigator
Engine: ITG ProFilter, Joe-Z Intake Pipe, Custom HKS Super Drager Exhaust, TRD Oil & Rad Cap & Grounding Kit
Suspension: BC Racing Coilovers, Hotchkis ARB's, Chassis Braces & WIM Geometry
Wheels: 18" OZ Ultraleggera & Falken ZE912 Tyres
Styling: Seibon Carbon Fibre Bonnet, Figs Bonnet Struts, Sports Grill, Repositioned Horns & SS Dials
ICE: JVC KW-AVX720 HU, Hifonics ZXI 6410 Amp, MB Quart RUA 216 2-Way Components, StealthBoXz with Infinity 12" Sub & Reverse Camera[/SIZE]
26-02-2018, 11:10 AM
jimxms Nice idea with the holes in the panel, but I think it may be counter productive mate?
The way i see it, the airflow on the n/a panel goes like this:
(blue) air comes in directly between the bonnet and the 'flap' lifts the air and directs it over the hole into the air intake.
(red) additional air that comes in from the lower part of the bumper and bounces off the radiator (too much airflow) is pushed upwards through the hole in the cooling panel, and joins the rest of the air.
I could be wrong, but with the holes in the panel, you'll be loosing half of your airflow through the holes? For it to really work you'd need both the holes and the flap. Which of course would mean welding on the flap I think.
what you've drawn/explained there is pretty much my exact thoughts on it. which is why I thought the one without the hole was a good idea.
I'm probably just overestimating how much air flow the intake needs, as what it gets from under the bonnet, and from around the sides of the intake should be enough without relying on air coming up from the radiator.
I'll still make both versions available though so people can chose which they like best.
EDIT: The more I think about it the more I think your right about not bothering with the perforated section. As that method wont even divert the airflow from under the bonnet up to the intake, it will just go straight through.
Edited 09-04-2011, 08:47 PM by sprinter2012.
sprinter2012
26-02-2018, 11:10 AM #37jimxms Nice idea with the holes in the panel, but I think it may be counter productive mate?
The way i see it, the airflow on the n/a panel goes like this:
(blue) air comes in directly between the bonnet and the 'flap' lifts the air and directs it over the hole into the air intake.
(red) additional air that comes in from the lower part of the bumper and bounces off the radiator (too much airflow) is pushed upwards through the hole in the cooling panel, and joins the rest of the air.
I could be wrong, but with the holes in the panel, you'll be loosing half of your airflow through the holes? For it to really work you'd need both the holes and the flap. Which of course would mean welding on the flap I think.
what you've drawn/explained there is pretty much my exact thoughts on it. which is why I thought the one without the hole was a good idea.
I'm probably just overestimating how much air flow the intake needs, as what it gets from under the bonnet, and from around the sides of the intake should be enough without relying on air coming up from the radiator.
I'll still make both versions available though so people can chose which they like best.
EDIT: The more I think about it the more I think your right about not bothering with the perforated section. As that method wont even divert the airflow from under the bonnet up to the intake, it will just go straight through.
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
01-03-2018, 08:22 AM
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
not being funny but the hole is irrelavent......it makes no odds if you have one or not but if you dont have the hole the plate looks a lot cleaner if you know what i mean..
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 13
Views 465
Views 465
19-09-2020, 10:59 AM
Last Post byel_bandido
Last Post by
Replies 11
Views 375
Views 375
09-07-2020, 02:23 PM
Last Post byStoney
Last Post by
Replies 7
Views 398
Views 398
26-02-2019, 08:49 AM
Last Post byrosey1955
Last Post by
Replies 2
Views 362
Views 362
02-03-2018, 08:39 AM
Last Post bysprinter2012
Last Post by
Replies 3
Views 368
Views 368
26-11-2017, 01:06 PM
Last Post bydimis
Last Post by
Replies 8
Views 531
Views 531
10-07-2017, 06:34 AM
Last Post byjay_russell
Last Post by