Side skirts
Side skirts
26-02-2018, 01:10 PM
TRD ones.
I did a search but found no info.
Does anyone have fitting instructions or a write up for putting them on correctly?
I seems straight forward enough,just want to make sure it is done properly.
Thanks.[/SIZE]
Edited 09-04-2011, 10:59 PM by bash6673.
26-02-2018, 01:40 PM
For extra strength, you can place tape along the top of the skirts to ensure a nice tight fit all the way along.
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Very straightforward matey. Ormi fitted mine for me recently, they basically just bolt into the pre-existing holes where the arch liner is. Word of warning, the front arches have a set of plastic spacers attached, and you will need them to fit the skirts properly...
For extra strength, you can place tape along the top of the skirts to ensure a nice tight fit all the way along.
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
26-02-2018, 03:04 PM
In the meantime, you can see a writeup with a couple of pics here, about halfway down the page...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Bit late to go taking pics now, but I can do it in the morning if you want..
In the meantime, you can see a writeup with a couple of pics here, about halfway down the page...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
27-02-2018, 01:46 AM
I'll nip out just now and take a couple pics of where the fittings are on the front and rear arches...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Heh you might think that, but I was too busy blethering with Ormi to remember to take pictures anyway...
I'll nip out just now and take a couple pics of where the fittings are on the front and rear arches...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
27-02-2018, 02:53 AM
![[Image: IMAG0505.jpg]](http://i919.photobucket.com/albums/ad36/daveplank/IMAG0505.jpg)
Rear Arch (Only the one bolt on, means no messing about with the second and needing to drill into arches etc; the skirts stay on fine with the bolt and the extra strong VHB tape)
![[Image: IMAG0506.jpg]](http://i919.photobucket.com/albums/ad36/daveplank/IMAG0506.jpg)
No pics of the underside fixings, as they're not fitted on there; again the tape and arch bolts are solid enough.
Scuse the mud... :kiltsmilie::kiltsmilie:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Front Arch (Note black plastic spacer)
Rear Arch (Only the one bolt on, means no messing about with the second and needing to drill into arches etc; the skirts stay on fine with the bolt and the extra strong VHB tape)
No pics of the underside fixings, as they're not fitted on there; again the tape and arch bolts are solid enough.
Scuse the mud... :kiltsmilie::kiltsmilie:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
27-02-2018, 11:58 AM
So I had no plate to fix with, besides it'll be fine as is
Ormi said so. Makes you wonder why they didn't just put the hole somewhere it'd just fit into the arch itself, rather than some plate...
:offtopic: Did you get the address details you needed Gord?
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Ah, but skirts from an IS being broken on fleabay don't arrive with a fitting kit Gord :lol:
So I had no plate to fix with, besides it'll be fine as is Ormi said so.
Makes you wonder why they didn't just put the hole somewhere it'd just fit into the arch itself, rather than some plate...
:offtopic: Did you get the address details you needed Gord?
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 10
Views 464
Views 464
12-03-2021, 11:09 AM
Last Post byis200turbo
Last Post by
Replies 40
Views 1,996
Views 1,996
05-01-2018, 08:03 AM
Last Post byreganlives
Last Post by