Apexi Neo AFC Help

Pages (6): 1 2 3 4 5 6 Next

James S
Posting Freak

1,240

14-03-2018, 02:13 AM

Right this is doing my nut in, could someone please help!?

Have managed to wire in the RPM, Power, Throttle but got too issues.

I can't work out which is the correct MAP sensor wire into the ECU.
And the battery volt meter on the AFC is reading 3.2v and flashing.

I am lost and very confused! LOL!

James S

14-03-2018, 02:13 AM #1

James S
Posting Freak

1,240

14-03-2018, 02:41 AM

Would a MAP sensor also been known as a Vacuum sensor?

James S

14-03-2018, 02:41 AM #2

Would a MAP sensor also been known as a Vacuum sensor?

toxo
Posting Freak

4,843

14-03-2018, 03:28 AM

Yep. Toyota seem to call them all sorts of different things, mine says TURBO PRESSURE SENSOR on it.

Presumably it measures the voltage over the positive and negative wires you have it connected to for power, so I'd double check the positive you've got, and also that you've got a good ground for the negative.

toxo

14-03-2018, 03:28 AM #3

James S
Posting Freak

1,240

14-03-2018, 04:12 AM

Right i have managed to locate the right wire for the MAP sensor. But once its cut so you get a line in and out for the AFC and you try start the car, it starts up then stalls straight away. :crying:
I can't understand where i am going wrong.

James S

14-03-2018, 04:12 AM #4

Rabster
Posting Freak

10,234

14-03-2018, 04:15 AM

sounds like its got some settings already installed on the neo that are running the wrong signals...

what the output voltage of the neo on the neo output...

Follow us on Twitter and join us on Facebook

Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]

Rabster

14-03-2018, 04:15 AM #5

sounds like its got some settings already installed on the neo that are running the wrong signals...

what the output voltage of the neo on the neo output...

Follow us on Twitter and join us on Facebook

Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]

James S
Posting Freak

1,240

14-03-2018, 04:17 AM

About .9v
What sory of sensor would the IS200 have :
Hot Wire,
Pressure,
Flap
Or Karman
???

James S

14-03-2018, 04:17 AM #6

About .9v
What sory of sensor would the IS200 have :
Hot Wire,
Pressure,
Flap
Or Karman
???

toxo
Posting Freak

4,843

14-03-2018, 04:24 AM

Edit: I'm being dense, it'll be pressure.

toxo

14-03-2018, 04:24 AM #7

Edit: I'm being dense, it'll be pressure.

James S
Posting Freak

1,240

14-03-2018, 04:32 AM

Wicked, and just to double check, this is the wire I have tapped into!

[Image: ECU.png]

The green/red one, coming from vacuum sensor.

James S

14-03-2018, 04:32 AM #8

Wicked, and just to double check, this is the wire I have tapped into!

[Image: ECU.png]

The green/red one, coming from vacuum sensor.

toxo
Posting Freak

4,843

14-03-2018, 04:41 AM

Looks right to me

toxo

14-03-2018, 04:41 AM #9

Looks right to me

James S
Posting Freak

1,240

14-03-2018, 04:42 AM

#10

Hmm.....shall go and have a play with the settings then. Might try resetting the AFC. Smile

James S

14-03-2018, 04:42 AM #10

Hmm.....shall go and have a play with the settings then. Might try resetting the AFC. Smile

Pages (6): 1 2 3 4 5 6 Next

Recently Browsing
2 Guest(s)