JapCarForum General Discussions JCF Photography Event/Show Pictures Japfest 14th May 2011 Picture thread

Japfest 14th May 2011 Picture thread

Japfest 14th May 2011 Picture thread

Pages (9): Previous 15 6 7 8 9 Next  
WizardKing
Junior Member
11
06-04-2018, 04:21 PM
#71
I like those.
The top one looks like a carving in granite or slate :thumbup:
WizardKing
06-04-2018, 04:21 PM #71

I like those.
The top one looks like a carving in granite or slate :thumbup:

Phil01
Posting Freak
2,004
06-04-2018, 04:22 PM
#72
your motor goes very well around the coombe mate, sounds nice as well
Phil01
06-04-2018, 04:22 PM #72

your motor goes very well around the coombe mate, sounds nice as well

WizardKing
Junior Member
11
06-04-2018, 04:30 PM
#73
Thanks Phil.

I was urged on after the R35 blasted past me. [ I don't feel so bad after finding out he was running 725bhp.]
WizardKing
06-04-2018, 04:30 PM #73

Thanks Phil.

I was urged on after the R35 blasted past me. [ I don't feel so bad after finding out he was running 725bhp.]

Bandit
Posting Freak
6,464
06-04-2018, 04:43 PM
#74
Will have to keep an eye out for you at other shows mate, wouldn't mind having a closer look at it, if you wouldn't mind :thumbup1:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
06-04-2018, 04:43 PM #74

Will have to keep an eye out for you at other shows mate, wouldn't mind having a closer look at it, if you wouldn't mind :thumbup1:


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

BOOSST
Banned
1,080
06-04-2018, 11:10 PM
#75
jimxms Depends if they came as a set? I think I could drop my standards on just that one occasion if I got a good two-for-one deal.


On another note....

[Image: P1010901.jpg]

...enuf weights? must be buckled to hell!

You say that, but when I was up at WIM I had to have a massive amount of wieght on one Alloy and they checked it very carefully and there was no buckle, warp or damage of any kind on it at all Huh
BOOSST
06-04-2018, 11:10 PM #75

jimxms Depends if they came as a set? I think I could drop my standards on just that one occasion if I got a good two-for-one deal.


On another note....

[Image: P1010901.jpg]

...enuf weights? must be buckled to hell!

You say that, but when I was up at WIM I had to have a massive amount of wieght on one Alloy and they checked it very carefully and there was no buckle, warp or damage of any kind on it at all Huh

purplewitch
Posting Freak
3,953
06-04-2018, 11:15 PM
#76
My brand new wheels with ultra low profiles needed a lot too and they aren't buckled or warped .. maybe low profiles or wider wheels need more .. there's more on all the back wheels of my supes than there are on the fronts ... or maybe the man at the garage was just jealous and stuck loads on to spoil the look

[SIGPIC][/SIGPIC] [COLOR="DarkOrchid"]That symbol on the side of my door.. Definition by FirebirdPhil 'Translated it means -
"try to overtake - go on give it a go I dare you......." [/COLOR]
I'm not an Outlaw; I'm a Poutlaw! Purple Supras are the bestest! I love purple .. a lot lot lot Smile
Follow us on Twitter and join us on Facebook
purplewitch
06-04-2018, 11:15 PM #76

My brand new wheels with ultra low profiles needed a lot too and they aren't buckled or warped .. maybe low profiles or wider wheels need more .. there's more on all the back wheels of my supes than there are on the fronts ... or maybe the man at the garage was just jealous and stuck loads on to spoil the look


[SIGPIC][/SIGPIC] [COLOR="DarkOrchid"]That symbol on the side of my door.. Definition by FirebirdPhil 'Translated it means -
"try to overtake - go on give it a go I dare you......." [/COLOR]
I'm not an Outlaw; I'm a Poutlaw! Purple Supras are the bestest! I love purple .. a lot lot lot Smile
Follow us on Twitter and join us on Facebook

BOOSST
Banned
1,080
06-04-2018, 11:22 PM
#77
purplewitch My brand new wheels with ultra low profiles needed a lot too and they aren't buckled or warped .. maybe low profiles or wider wheels need more .. there's more on all the back wheels of my supes than there are on the fronts ... or maybe the man at the garage was just jealous and stuck loads on to spoil the look

WIM very kindly stuck black on black to hide the wieghts inside my Alloys..
BOOSST
06-04-2018, 11:22 PM #77

purplewitch My brand new wheels with ultra low profiles needed a lot too and they aren't buckled or warped .. maybe low profiles or wider wheels need more .. there's more on all the back wheels of my supes than there are on the fronts ... or maybe the man at the garage was just jealous and stuck loads on to spoil the look

WIM very kindly stuck black on black to hide the wieghts inside my Alloys..

WizardKing
Junior Member
11
07-04-2018, 03:12 AM
#78
Bandit,

No problem, anytime. I'm only just up the road from you, in Tower town. In April, went to a meet at the Trafford centre.
I'll try to keep an eye out for NW club meets (not just MLR ones !)


Marsdendean,

Thanks :thumbup1: .
Funny you should say that, on photographs it looked either very squared (as on Volvo estates) or, on others it looked very curved !

In the flesh, it looks like a bit of both.
WizardKing
07-04-2018, 03:12 AM #78

Bandit,

No problem, anytime. I'm only just up the road from you, in Tower town. In April, went to a meet at the Trafford centre.
I'll try to keep an eye out for NW club meets (not just MLR ones !)


Marsdendean,

Thanks :thumbup1: .
Funny you should say that, on photographs it looked either very squared (as on Volvo estates) or, on others it looked very curved !

In the flesh, it looks like a bit of both.

jimxms
Posting Freak
2,473
07-04-2018, 03:52 AM
#79
BOOSST You say that, but when I was up at WIM I had to have a massive amount of wieght on one Alloy and they checked it very carefully and there was no buckle, warp or damage of any kind on it at all Huh

I've got a fair bit of weight on one of my wheels (nothing like that pic tho). But I think its down to the fact that when I refurbed my split rims and bolted them back together, there was a tiny amount of play in the position where it could be bolted back together again. So I think i just bolted it back up ever so slightly wonky.
jimxms
07-04-2018, 03:52 AM #79

BOOSST You say that, but when I was up at WIM I had to have a massive amount of wieght on one Alloy and they checked it very carefully and there was no buckle, warp or damage of any kind on it at all Huh

I've got a fair bit of weight on one of my wheels (nothing like that pic tho). But I think its down to the fact that when I refurbed my split rims and bolted them back together, there was a tiny amount of play in the position where it could be bolted back together again. So I think i just bolted it back up ever so slightly wonky.

Mazz
Senior Member
265
07-04-2018, 06:10 AM
#80
Here are a few of the few i took.

[Image: IMG_8560.jpg]
[Image: IMG_8561.jpg]
[Image: IMG_8562.jpg]
[Image: IMG_8568.jpg]
[Image: IMG_8569.jpg]
[Image: IMG_8570.jpg]
[Image: IMG_8573.jpg]
[Image: IMG_8574.jpg]
[Image: IMG_8584.jpg]
[Image: IMG_8585.jpg]
[Image: IMG_8594.jpg]

hummm i didnt relise just how many pics of my car i took..... in love with it much?! LOL

In the dark i watch and wait......
[Image: IMG_9151SIG.png]
Mazz
07-04-2018, 06:10 AM #80

Here are a few of the few i took.

[Image: IMG_8560.jpg]
[Image: IMG_8561.jpg]
[Image: IMG_8562.jpg]
[Image: IMG_8568.jpg]
[Image: IMG_8569.jpg]
[Image: IMG_8570.jpg]
[Image: IMG_8573.jpg]
[Image: IMG_8574.jpg]
[Image: IMG_8584.jpg]
[Image: IMG_8585.jpg]
[Image: IMG_8594.jpg]

hummm i didnt relise just how many pics of my car i took..... in love with it much?! LOL


In the dark i watch and wait......
[Image: IMG_9151SIG.png]

Pages (9): Previous 15 6 7 8 9 Next  
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 11
Views 355
14-08-2023, 08:03 AM
Last Post by Rabster
Replies 8
Views 266
04-04-2023, 11:22 PM
Last Post by EmZ
Replies 1
Views 196
04-04-2023, 01:40 AM
Last Post by Dinho
Replies 18
Views 2,624
05-04-2020, 08:10 AM
Last Post by DaveEdin
Replies 29
Views 2,648
06-04-2019, 06:49 AM
Last Post by is300_dino
Replies 11
Views 1,339
24-11-2018, 06:56 PM
Last Post by wede11
Replies 40
Views 3,792
11-11-2018, 11:23 AM
Last Post by NickyNockersNooNoo
Replies 19
Views 2,073
24-09-2018, 10:28 AM
Last Post by is300_dino
Replies 12
Views 1,469
12-08-2018, 07:26 AM
Last Post by Stoney
Replies 7
Views 951
11-08-2018, 12:38 AM
Last Post by daz@likwidart