Beams Altezza engine
Beams Altezza engine
Jimbob-T-Lex
21-05-2018, 06:26 AM #1Hi i can get hold of a beams altezza engine on the cheap and was wondering how hard it is to put in is200 and does the is200 gearbox fit on to it? any other parts i might be needing would be a great help!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
21-05-2018, 06:45 AM #2You may as well put a 1JZ in the work is surprisingly similar.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:The question that first jumps to mind is, Why? There doesn't seem a lot of point dropping in an Altezza lump. It would be far easier and cheaper to put an IS200 interior in an Altezza... there you go, exact same car!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
Jimbob-T-Lex
21-05-2018, 07:55 AM #5well starters altezza got more bhp and parts seem cheaper and easier to get hold of than is200 parts
jimbob150385 well starters altezza got more bhp and parts seem cheaper and easier to get hold of than is200 parts
My original point still applies. Easier option for the same vehicle on your drive! 90+% of the parts are identical anyway.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:jimbob150385 well starters altezza got more bhp and parts seem cheaper and easier to get hold of than is200 parts
My original point still applies. Easier option for the same vehicle on your drive! 90+% of the parts are identical anyway.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
Yeah, this is what I am planning at the min. Been looking for a couple of years at the best option for getting more power from as IS200, and to be honest the easist option is to buy a tezza or a 300 and swap my bits on to it. Both models have dropped loads in price recently. So waiting till my insurance to drop enough to afford one, and making sure I only buy bits for my current 200 that are interchangable. Then when I find the right one, and I can afford to insure it. Buy it swap all the bits over, and then flog on my old one. Defo the most cost effective way IMO.
LEXUS IS200 - The most fun car to go sideways
The manual IS200 gearbox (J160) is identical with the Altezza mate. I believe engine installation will be easy. Harness wiring might be a bit difficult. Make sure you get an egine together with an ecu and harness.
LEXUS IS200 - The most fun car to go sideways
dimis The manual IS200 gearbox (J160) is identical with the Altezza mate. I believe engine installation will be easy. Harness wiring might be a bit difficult. Make sure you get an egine together with an ecu and harness.
Same gearbox, different bell housing and starter is on the other side to the is200 the altezza swap is far from easy, the different bell housing moves the gearbox position, making it necessary to shorten the prop shaft, adapt the gear lever position........ the list goes on and on.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
22-05-2018, 02:07 AM #9dimis The manual IS200 gearbox (J160) is identical with the Altezza mate. I believe engine installation will be easy. Harness wiring might be a bit difficult. Make sure you get an egine together with an ecu and harness.
Same gearbox, different bell housing and starter is on the other side to the is200 the altezza swap is far from easy, the different bell housing moves the gearbox position, making it necessary to shorten the prop shaft, adapt the gear lever position........ the list goes on and on.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
1 Guest(s)
1 Guest(s)
Views 305
Last Post by
Views 313
Last Post by
Views 233
Last Post by
Views 360
Last Post by
Views 369
Last Post by
Views 269
Last Post by
Views 304
Last Post by
Views 317
Last Post by