JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza heater led swap

heater led swap

heater led swap

Pages (16): Previous 112 13 14 15 16 Next  
jay_russell
Posting Freak
3,005
23-05-2018, 11:39 AM
thats good news, not sure about the clock not working as i just replaced the bulbs in there and nothing more, hows the lights on the buttons ? working or not ?
jay_russell
23-05-2018, 11:39 AM #131

thats good news, not sure about the clock not working as i just replaced the bulbs in there and nothing more, hows the lights on the buttons ? working or not ?

Moley
Posting Freak
6,230
23-05-2018, 11:44 AM
yes they work apart from the recycle air botton , but I'm not worried about that .

The clock did work the first few times I had it in , so I will just play about with it till they come on again .

Sorry but its not dark enough here to get a night pic and I dont have my camera anyway and I'm not putting my stereo and dash back together until the clock works again

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
23-05-2018, 11:44 AM #132

yes they work apart from the recycle air botton , but I'm not worried about that .

The clock did work the first few times I had it in , so I will just play about with it till they come on again .

Sorry but its not dark enough here to get a night pic and I dont have my camera anyway and I'm not putting my stereo and dash back together until the clock works again


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

jay_russell
Posting Freak
3,005
23-05-2018, 11:56 AM
thats good to hear, well i hope that the clock comes on again, maybe check the ribbon cable to make sure it's fitted straight
jay_russell
23-05-2018, 11:56 AM #133

thats good to hear, well i hope that the clock comes on again, maybe check the ribbon cable to make sure it's fitted straight

Moley
Posting Freak
6,230
23-05-2018, 12:01 PM
I never touched the ribbon Jay so it wont be that mate , but I'll have a look at that tomorrow just to make sure

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
23-05-2018, 12:01 PM #134

I never touched the ribbon Jay so it wont be that mate , but I'll have a look at that tomorrow just to make sure


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

DaveEdin
Posting Freak
5,657
24-05-2018, 08:14 AM
Righto - Moley's sent me his pictures - without further ado...

[Image: IMG046.jpg]

[Image: IMG049.jpg]

[Image: IMG048.jpg]

[Image: IMG047.jpg]


Looking great matey :thumbup: :thumbup:

IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
DaveEdin
24-05-2018, 08:14 AM #135

Righto - Moley's sent me his pictures - without further ado...

[Image: IMG046.jpg]

[Image: IMG049.jpg]

[Image: IMG048.jpg]

[Image: IMG047.jpg]


Looking great matey :thumbup: :thumbup:


IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake

Moley
Posting Freak
6,230
24-05-2018, 08:19 AM
Cheers Dave , better pics to follow once I move house and find the blooody camera.

Also I'll try and get some night time pics to show off my pic skills

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
24-05-2018, 08:19 AM #136

Cheers Dave , better pics to follow once I move house and find the blooody camera.

Also I'll try and get some night time pics to show off my pic skills


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

jay_russell
Posting Freak
3,005
24-05-2018, 08:49 AM
so any news on the clock? and is you happy with how it looks and works? want to know if there is anything else i should have done or do for the next one?
jay_russell
24-05-2018, 08:49 AM #137

so any news on the clock? and is you happy with how it looks and works? want to know if there is anything else i should have done or do for the next one?

Stoney
Posting Freak
2,117
24-05-2018, 08:57 AM
Looks very good. Can't wait to get a set in mine!

You know what's missing though... Night pics! :kiltsmilie:

[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:
Stoney
24-05-2018, 08:57 AM #138

Looks very good. Can't wait to get a set in mine!

You know what's missing though... Night pics! :kiltsmilie:


[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:

Moley
Posting Freak
6,230
24-05-2018, 11:16 PM
jay_russell so any news on the clock? and is you happy with how it looks and works? want to know if there is anything else i should have done or do for the next one?

They look perfect , there are no bright or dull spots :thumbup:.

The clock is still not working . The only thing I would suggest if it could be done is a better connection for the black and red cable ( soldered onto the board if you knew the correct way round ) apart from that they are perfect :thumbup1:

I am posting you my original one today Jay

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
24-05-2018, 11:16 PM #139

jay_russell so any news on the clock? and is you happy with how it looks and works? want to know if there is anything else i should have done or do for the next one?

They look perfect , there are no bright or dull spots :thumbup:.

The clock is still not working . The only thing I would suggest if it could be done is a better connection for the black and red cable ( soldered onto the board if you knew the correct way round ) apart from that they are perfect :thumbup1:

I am posting you my original one today Jay


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

bounty`
Senior Member
328
24-05-2018, 11:36 PM
After seeing Moley's pics I think Im definitley going to have this done Smile Only question is do I get them done with white led's or green? My interior will be re-trimmed next year in black leather, with green leather centres and double green stitching, so just wondering whether green might be a little overkill or work nicely?

[Image: OJCSig.jpg]
DanielWatts Banging 9.5J Wheels 'coz that's how you roll
bounty`
24-05-2018, 11:36 PM #140

After seeing Moley's pics I think Im definitley going to have this done Smile Only question is do I get them done with white led's or green? My interior will be re-trimmed next year in black leather, with green leather centres and double green stitching, so just wondering whether green might be a little overkill or work nicely?


[Image: OJCSig.jpg]
DanielWatts Banging 9.5J Wheels 'coz that's how you roll

Pages (16): Previous 112 13 14 15 16 Next  
Recently Browsing
 8 Guest(s)
Recently Browsing
 8 Guest(s)
Related Threads…
Replies 13
Views 465
19-09-2020, 10:59 AM
Last Post by el_bandido
Replies 3
Views 282
02-08-2019, 08:54 AM
Last Post by Almost Finished
Replies 4
Views 326
24-01-2019, 12:14 PM
Last Post by Jaminglish
Replies 17
Views 976
04-11-2018, 05:02 AM
Last Post by Stoney
Replies 26
Views 1,519
01-03-2018, 08:54 PM
Last Post by James S
Replies 13
Views 679
03-11-2017, 10:16 PM
Last Post by jay_russell
Replies 2
Views 263
13-09-2017, 09:28 AM
Last Post by lex2oos