JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Engine & Transmission rear oil seal questions.

rear oil seal questions.

rear oil seal questions.

lex2oos
Member
138
01-06-2018, 08:16 AM
#1
Hi!
seems like my clutch is givin up, so I'll chage that, but there is oil where the gearbox mounts to engine.
So that could be rear oil seal. Looking at toyodiy there are 3 parts - seal, retainer and a gasket. Do I need all three, or can I get trough with seal only?
who has done it? how much it costs?

Thanks! Wink
lex2oos
01-06-2018, 08:16 AM #1

Hi!
seems like my clutch is givin up, so I'll chage that, but there is oil where the gearbox mounts to engine.
So that could be rear oil seal. Looking at toyodiy there are 3 parts - seal, retainer and a gasket. Do I need all three, or can I get trough with seal only?
who has done it? how much it costs?

Thanks! Wink

lex2oos
Member
138
01-08-2018, 07:32 AM
#2
cluch is getting worse, so I am about to change it soon...
and the question about oil seal is still actual.
lex2oos
01-08-2018, 07:32 AM #2

cluch is getting worse, so I am about to change it soon...
and the question about oil seal is still actual.

ormi
Posting Freak
3,006
01-08-2018, 10:43 AM
#3
you only need to replace the seal mate

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
01-08-2018, 10:43 AM #3

you only need to replace the seal mate


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

lex2oos
Member
138
02-08-2018, 10:18 AM
#4
seal can be replaced without removing retainer? If retainer has to be removed, the gasket is gone too...
lex2oos
02-08-2018, 10:18 AM #4

seal can be replaced without removing retainer? If retainer has to be removed, the gasket is gone too...

rob
Senior Member
720
04-08-2018, 09:32 PM
#5
if the cost is not too much, why not replace all 3 at the same time?
rob
04-08-2018, 09:32 PM #5

if the cost is not too much, why not replace all 3 at the same time?

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 6
Views 230
18-05-2020, 11:48 AM
Last Post by rob
Replies 2
Views 175
15-01-2020, 09:55 AM
Last Post by Jon
Replies 14
Views 1,122
01-09-2018, 11:46 AM
Last Post by Bonney