Help me find a vent please?
Help me find a vent please?
Looking for something like this...
![[Image: 371373101.jpg]](http://pic50.picturetrail.com/VOL482/3191867/22382099/371373101.jpg)
The feed will be coming from an outlet of 70mm (2 3/4") so I need this vent to be either the same or slightly bigger so I don't need adapters on the tubing.
I spent over an hour on eBay last night searching for inlet, outlet, intake, vent, ducting etc. but all I could find was rubbish plastic ones for heaters in caravans or something. Nothing that I could attach a hose to the back of.
Probably just one of those items where once you find the right search term there'd be hundreds of them popping up.
sprinter2012
04-06-2018, 09:01 AM #1I need a circular vent for a mod I'm doing.
Looking for something like this...
The feed will be coming from an outlet of 70mm (2 3/4") so I need this vent to be either the same or slightly bigger so I don't need adapters on the tubing.
I spent over an hour on eBay last night searching for inlet, outlet, intake, vent, ducting etc. but all I could find was rubbish plastic ones for heaters in caravans or something. Nothing that I could attach a hose to the back of.
Probably just one of those items where once you find the right search term there'd be hundreds of them popping up.
Slightly confused by their dimensions. I'm assuming where they say cutout depth, they mean diameter.
I'll send them a message to double check, but if thats the case I'll be buying one of those!
See what I mean about the search term though, none of my keywords would have found a 'black plastic moulded port tube' :glare:
sprinter2012
04-06-2018, 09:44 AM #3Yesssss!
Slightly confused by their dimensions. I'm assuming where they say cutout depth, they mean diameter.
I'll send them a message to double check, but if thats the case I'll be buying one of those!
See what I mean about the search term though, none of my keywords would have found a 'black plastic moulded port tube' :glare:
But yeah, I saw your picture and it immediately reminded me of the bass port tubes you see on subwoofers/speakers
moke:
I assumed that the 50mm depth referred to how tall the tube was maybe? I would _hope_ that the 70mm would be the ID of the pipe rather than the OD or flange?
But yeah, I saw your picture and it immediately reminded me of the bass port tubes you see on subwoofers/speakers moke:
25mm flange, 70mm diameter tube and 50mm deep. I hope
sprinter2012
04-06-2018, 09:52 AM #5Yee sorry I got confused, from what I understand...
25mm flange, 70mm diameter tube and 50mm deep. I hope
2 Guest(s)
2 Guest(s)
Views 666
Last Post by
Views 1,109
Last Post by
Views 463
Last Post by
Views 420
Last Post by
Views 667
Last Post by