JapCarForum Trade Area Trade Archive Selling Archive Is200/300 Altezza Japsai Chassis braces

Is200/300 Altezza Japsai Chassis braces

Is200/300 Altezza Japsai Chassis braces

Pages (4): Previous 1 2 3 4
ormi
Posting Freak
3,006
08-06-2018, 04:47 PM
#31
Anees I used to have these on my IS200; I personally LOVED them and they really transformed the front end of the car. The steering was more direct and the turn-in much better.

They do hang down, but they are really strong metal and I would rather they scrap then the bottom of the car, so you could say they actually do a good job of protecting the underneath of the car.

How do the TRD ones compare Stav?

i dont think you understand how close to the ground my car is....from the subframe to the ground i have just under 1.25 inches from the bottom of the plastic trys at the back to the ground i have under 1.25 inches now take away 3cm my car wouldnt move.....i can get about the now with the car only scraping on speed bumps if i fitted bars it would hit the road soon as i get a slight dip in the road...i could fit cusco ones as they are thin metal...

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
08-06-2018, 04:47 PM #31

Anees I used to have these on my IS200; I personally LOVED them and they really transformed the front end of the car. The steering was more direct and the turn-in much better.

They do hang down, but they are really strong metal and I would rather they scrap then the bottom of the car, so you could say they actually do a good job of protecting the underneath of the car.

How do the TRD ones compare Stav?

i dont think you understand how close to the ground my car is....from the subframe to the ground i have just under 1.25 inches from the bottom of the plastic trys at the back to the ground i have under 1.25 inches now take away 3cm my car wouldnt move.....i can get about the now with the car only scraping on speed bumps if i fitted bars it would hit the road soon as i get a slight dip in the road...i could fit cusco ones as they are thin metal...


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

Stoney
Posting Freak
2,117
11-06-2018, 04:25 AM
#32
Anees's comments are encouraging. Though I would be a little worried as I might scrape my drive way every time if combined with the 50-60mm drop I had in mind.

Low on funds still too, so Stav, can you put these in your "Stoney might have if nobody else does" pile?

[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:
Stoney
11-06-2018, 04:25 AM #32

Anees's comments are encouraging. Though I would be a little worried as I might scrape my drive way every time if combined with the 50-60mm drop I had in mind.

Low on funds still too, so Stav, can you put these in your "Stoney might have if nobody else does" pile?


[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:

jay_russell
Posting Freak
3,005
11-06-2018, 04:46 AM
#33
my offer still stands if you have no takers Smile
jay_russell
11-06-2018, 04:46 AM #33

my offer still stands if you have no takers Smile

Sparkystav
Administrator
14,683
11-06-2018, 10:22 AM
#34
Their provisionally sold to Kevpr pending payment lads

OutlawJapClub Admin Team
Sparkystav
11-06-2018, 10:22 AM #34

Their provisionally sold to Kevpr pending payment lads


OutlawJapClub Admin Team

Pages (4): Previous 1 2 3 4
Recently Browsing
 14 Guest(s)
Recently Browsing
 14 Guest(s)
Related Threads…
Replies 7
Views 336
05-05-2023, 03:10 AM
Last Post by Sparkystav
Replies 15
Views 1,356
06-09-2021, 04:01 AM
Last Post by KdotjapIS
Replies 28
Views 1,634
02-09-2021, 03:05 PM
Last Post by KdotjapIS
Replies 40
Views 1,847
20-09-2020, 01:12 AM
Last Post by ozzie b
Replies 3
Views 239
17-09-2020, 12:35 AM
Last Post by SHAHZ
Replies 5
Views 352
06-09-2020, 05:51 AM
Last Post by SHAHZ
Replies 1
Views 194
02-09-2020, 12:49 PM
Last Post by SHAHZ
Replies 3
Views 264
23-08-2020, 10:16 AM
Last Post by SHAHZ