Wanted: Tuner nuts
Wanted: Tuner nuts
15-06-2018, 11:37 AM
Let me know
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
15-06-2018, 11:37 AM #1Anyone have any?
Let me know
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
16-06-2018, 08:05 AM
Gord Well i came to take my rear wheels off , the last people to put them on was these cowboys, busted bent 2 wheel braces getting the nuts off :Bazza:
Real cowboys :Bazza:
So they are a tyre shop who not only have no idea how to roll arches, but are also incapable of correctly torquing wheel nuts! Sound like real pros.
Do they wear large brimmed hats and turn up to work on horses?
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Gord Well i came to take my rear wheels off , the last people to put them on was these cowboys, busted bent 2 wheel braces getting the nuts off :Bazza:
Real cowboys :Bazza:
So they are a tyre shop who not only have no idea how to roll arches, but are also incapable of correctly torquing wheel nuts! Sound like real pros.
Do they wear large brimmed hats and turn up to work on horses?
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
16-06-2018, 08:39 AM
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
16-06-2018, 08:39 AM #6On a slightly connected line, how tight do you torque wheel nuts?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
16-06-2018, 08:50 AM
Stoney So they are a tyre shop who not only have no idea how to roll arches, but are also incapable of correctly torquing wheel nuts! Sound like real pros.
Do they wear large brimmed hats and turn up to work on horses?
if you correctly torc nuts the **** wheel wrench that u get wont remove them, if u try to remove after a run then basic physics comes to play (hot metal expands and contracts and can in some cases tighten more than the torc pressure), how is it one person has an issue then there cowboys but ive had no problems at all with them, or the drag racers or drifters etc!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
to roll arches they do warn you that the process can crack paint, and with that comment cannot be held liable, try an get a firm that will (cos u wont)
as for cowboy hats then ill show u nxt time u bother turnning up to a show as i dont and i work very very close to them.:LOCMOD:
[SIGPIC][/SIGPIC]One chance in life - LIVE it to the full
:drink: :thumbup:
Stoney So they are a tyre shop who not only have no idea how to roll arches, but are also incapable of correctly torquing wheel nuts! Sound like real pros.
Do they wear large brimmed hats and turn up to work on horses?
if you correctly torc nuts the **** wheel wrench that u get wont remove them, if u try to remove after a run then basic physics comes to play (hot metal expands and contracts and can in some cases tighten more than the torc pressure), how is it one person has an issue then there cowboys but ive had no problems at all with them, or the drag racers or drifters etc!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
to roll arches they do warn you that the process can crack paint, and with that comment cannot be held liable, try an get a firm that will (cos u wont)
as for cowboy hats then ill show u nxt time u bother turnning up to a show as i dont and i work very very close to them.:LOCMOD:
[SIGPIC][/SIGPIC]One chance in life - LIVE it to the full
:drink: :thumbup:
16-06-2018, 09:22 AM
greeny if you correctly torc nuts the **** wheel wrench that u get wont remove them, if u try to remove after a run then basic physics comes to play (hot metal expands and contracts and can in some cases tighten more than the torc pressure), how is it one person has an issue then there cowboys but ive had no problems at all with them, or the drag racers or drifters etc!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
to roll arches they do warn you that the process can crack paint, and with that comment cannot be held liable, try an get a firm that will (cos u wont)
as for cowboy hats then ill show u nxt time u bother turnning up to a show as i dont and i work very very close to them.:LOCMOD:
Well obviously they do not cause problems for every customer, or they would be out of business! I'm sure they have lots of happy customers. I can only comment on what I know about them, and I am afraid that is only what I hear from Gord, and of course that could all be down to one problematic member of staff. I'm sure he is well aware of the risks of arch rolling, but the fact is they did not reduce those risks by heating, even after promising that they would. That is not really acceptable, and he has every right to be mad/upset about that.
I have had a few problems with our local Powerflow place over the years, and would think twice before using them again, but many others are happy with them.
I was only having a joke, but you seem to be friends with them, and taking offence, so I will say no more, as it was never my intention to create tension with fellow members of OJC.
Edited 28-07-2011, 06:58 PM by Stoney.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:greeny if you correctly torc nuts the **** wheel wrench that u get wont remove them, if u try to remove after a run then basic physics comes to play (hot metal expands and contracts and can in some cases tighten more than the torc pressure), how is it one person has an issue then there cowboys but ive had no problems at all with them, or the drag racers or drifters etc!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
to roll arches they do warn you that the process can crack paint, and with that comment cannot be held liable, try an get a firm that will (cos u wont)
as for cowboy hats then ill show u nxt time u bother turnning up to a show as i dont and i work very very close to them.:LOCMOD:
Well obviously they do not cause problems for every customer, or they would be out of business! I'm sure they have lots of happy customers. I can only comment on what I know about them, and I am afraid that is only what I hear from Gord, and of course that could all be down to one problematic member of staff. I'm sure he is well aware of the risks of arch rolling, but the fact is they did not reduce those risks by heating, even after promising that they would. That is not really acceptable, and he has every right to be mad/upset about that.
I have had a few problems with our local Powerflow place over the years, and would think twice before using them again, but many others are happy with them.
I was only having a joke, but you seem to be friends with them, and taking offence, so I will say no more, as it was never my intention to create tension with fellow members of OJC.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
16-06-2018, 11:46 AM
Marsdendean Maybe Gord was just unlucky . . .
Yes, but the way I understand it (Gord may confirm or correct me) is that they told him they would use heat to reduce the risk of damage, and then did not do that. I think that was the main problem. The damage could have been prevented if they had stuck to their word. (This cannot be proved, but is likely.) If I am correct, (please correct me if not) that is dishonest and unprofessional.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Marsdendean Maybe Gord was just unlucky . . .
Yes, but the way I understand it (Gord may confirm or correct me) is that they told him they would use heat to reduce the risk of damage, and then did not do that. I think that was the main problem. The damage could have been prevented if they had stuck to their word. (This cannot be proved, but is likely.) If I am correct, (please correct me if not) that is dishonest and unprofessional.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
16-06-2018, 12:31 PM
Stoney Yes, but the way I understand it (Gord may confirm or correct me) is that they told him they would use heat to reduce the risk of damage, and then did not do that. I think that was the main problem. The damage could have been prevented if they had stuck to their word. (This cannot be proved, but is likely.) If I am correct, (please correct me if not) that is dishonest and unprofessional.
as in your own words it only saya reduce we did mine the same as gords and low an behold it cracked the paint on the lips even with heat, an imported is 200 has an arch that does not return on the back lip it stops with a sharp edge the same as a £50 thousand pound merc. the same happens now i do believe the marsdendean has used em too with no issues for quite a while.
[SIGPIC][/SIGPIC]One chance in life - LIVE it to the full
:drink: :thumbup:
Stoney Yes, but the way I understand it (Gord may confirm or correct me) is that they told him they would use heat to reduce the risk of damage, and then did not do that. I think that was the main problem. The damage could have been prevented if they had stuck to their word. (This cannot be proved, but is likely.) If I am correct, (please correct me if not) that is dishonest and unprofessional.
as in your own words it only saya reduce we did mine the same as gords and low an behold it cracked the paint on the lips even with heat, an imported is 200 has an arch that does not return on the back lip it stops with a sharp edge the same as a £50 thousand pound merc. the same happens now i do believe the marsdendean has used em too with no issues for quite a while.
[SIGPIC][/SIGPIC]One chance in life - LIVE it to the full
:drink: :thumbup:
Recently Browsing
4 Guest(s)
4 Guest(s)
Recently Browsing
4 Guest(s)
4 Guest(s)
Related Threads…
Replies 6
Views 255
Views 255
31-03-2020, 03:13 AM
Last Post byChris0121
Last Post by
Replies 12
Views 536
Views 536
13-10-2019, 01:11 PM
Last Post byLexuspat
Last Post by
Replies 22
Views 706
Views 706
12-10-2019, 10:39 AM
Last Post byjomo
Last Post by
Replies 7
Views 295
Views 295
07-10-2019, 01:13 PM
Last Post byChris0121
Last Post by
Replies 7
Views 495
Views 495
24-09-2019, 10:24 AM
Last Post bymicromarc
Last Post by
Replies 1
Views 177
Views 177
20-09-2019, 10:38 AM
Last Post bySparkystav
Last Post by
Replies 12
Views 552
Views 552
18-08-2019, 03:10 PM
Last Post bySparkystav
Last Post by