TTE Supercharger Install Help!
TTE Supercharger Install Help!
so its just one wire on the ecu i cut, an connect to both cut ends? which wire will it be 1 that i spliced into or a diffrent one?
i think i get it they both need to be on the 1st blue with yellow wire in series il go and have a look now and get some pics.
yeah one cut wire and the new box goes one to the ecu side one to the loom side
i dont know what colour it is but on aj's pic it looks like red and black
ok i checked ajs pic and it seems the cut wire was the blue with yellow stripe, it has black tape on it and, the red and yellow wire you left goes to the same place so when i think the blueyellow wire was cut the red and yellow soldered close to the ecu a bit of dead blueyellow wire then the cut side soldered to the brow so i have dont it like this, will go for a drive and test it.
ok still fuel cut so you think its red and black where you put the redyellow wire?
ok i tried that but still hits it at 5k rpm im kinda stuck now dont wana keep cuting wires
Odd i thought the wire you cut was this:
MAP E5 9 Green Red
Ground ECU B E5 17 Brown
Ignition Power E2 16 Black Red