trying to find out the fault
trying to find out the fault
If it is a prop shaft, what kind a price I am looking for repairs? and what else can it be? Engine runs fine. but when I stopped, there was a dodgy smell, something like burnt oil, so at first I thought it might be smth major.
Car is in the garage now, so will see what will they tell me
Ok, here goes: been driving in 6th gear on a motorway, when out of a sudden heard a wee pop sound and after that car just lost power. Engine is running alright, but sticking into gears doesnt do anything at all. RAC been to attend, suggested it might be prop-shaft, after a lot of thinking, I also thought it might be clutch bearing or smth like that.
If it is a prop shaft, what kind a price I am looking for repairs? and what else can it be? Engine runs fine. but when I stopped, there was a dodgy smell, something like burnt oil, so at first I thought it might be smth major.
Car is in the garage now, so will see what will they tell me
you need to get the codes from the ECU to be sure.
to check why not put the car on axles stands and CAREFULLY put the car in gear, see what spins
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
09-08-2018, 03:35 AM #2Hmm, the engine light doesnt generally come on for anything other than the engine.
you need to get the codes from the ECU to be sure.
to check why not put the car on axles stands and CAREFULLY put the car in gear, see what spins
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
09-08-2018, 03:39 AM #3sounds similar to what happened when stavs shaft went but he wasnt on the motorway, the start line at santapod but he had a spare set so didnt have to buy a replacement luckily, on ebay they are selling between £30 and £70ish hope the garage dont hit your wallet to hard
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
Firstly i'd hope not as its a custom one, it was the half shaft from the diff to the driveshaft
If the props def not spinning then got to be gearbox related, sorry about my earlier comments, read "engine light on" instead of "engine running alright"
First thing is to get the gearbox off, Clutch bearing wont cause it as that wont cause you to lose power itll just whine then fail and you wont be able to change gear.
could be something random like the clutch plate shearing from the centre spline?
but like i said if the engine spins and the prop doesnt its got to be clutch to gearbox really.
Cant remember if theres any sort of inspection hole on the bellhousing. Otherwise you could get it on a ramp, put it in gear then look inside and see if the clutch is spinning the geabox shaft.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
09-08-2018, 08:29 AM #5It wasnt my prop shaft that went Dinho.
Firstly i'd hope not as its a custom one, it was the half shaft from the diff to the driveshaft
If the props def not spinning then got to be gearbox related, sorry about my earlier comments, read "engine light on" instead of "engine running alright"
First thing is to get the gearbox off, Clutch bearing wont cause it as that wont cause you to lose power itll just whine then fail and you wont be able to change gear.
could be something random like the clutch plate shearing from the centre spline?
but like i said if the engine spins and the prop doesnt its got to be clutch to gearbox really.
Cant remember if theres any sort of inspection hole on the bellhousing. Otherwise you could get it on a ramp, put it in gear then look inside and see if the clutch is spinning the geabox shaft.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
The strangest thing is, it happened whilst driving steady, not changing gears or accelerating. At first I thought my cambelt snapped (as it is due to be changed around this mileage)
so I'm both happy and gutted at the same time
I had some squeking noises when depressing the clutch before, and usual juddering on 1st and 2nd gears.
The strangest thing is, it happened whilst driving steady, not changing gears or accelerating. At first I thought my cambelt snapped (as it is due to be changed around this mileage)
so I'm both happy and gutted at the same time
Sounds to me like a blown clutch plate. This could be a simple fix, or a nightmare. It will be hard to tell till its all apart though. Hopefully it wont have caused damage to the gearbox casing or flywheel. Do these have dual mass flywheels fitted? That could always be an issue, an expensive one at that
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
09-08-2018, 11:03 AM #8yes they do mate,
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
09-08-2018, 12:26 PM #10lightened, or the one off the 1ggte is solid and fits
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
2 Guest(s)
2 Guest(s)