the rear arch mounting for the trd skirts
the rear arch mounting for the trd skirts
so you have to stick the skirts on with 3m tape but at the rear arch their is two holes but you can only use one due to the other being too far away from the arch lip..well i fitted daves skirts for him and one of the skirts came with part of the mounting kit..i forgot i had this till i was sweeping up the garage..
i thought to myself i could make that....
so heres how....
the hole at the back arch
![[Image: img3848mcwlv.jpg]](http://img864.imageshack.us/img864/5986/img3848mcwlv.jpg)
the mounting off daves skirt
![[Image: img3841.jpg]](http://img857.imageshack.us/img857/4926/img3841.jpg)
the metal i used to make the mount
![[Image: img3842h.jpg]](http://img405.imageshack.us/img405/1313/img3842h.jpg)
the metal cut
![[Image: img3843d.jpg]](http://img34.imageshack.us/img34/4144/img3843d.jpg)
my mountings fitted with speed clips beside the trd mounting
![[Image: img3845w.jpg]](http://img59.imageshack.us/img59/6229/img3845w.jpg)
mountings all painted
![[Image: img3846e.jpg]](http://img839.imageshack.us/img839/327/img3846e.jpg)
all fitted
![[Image: img3850e.jpg]](http://img600.imageshack.us/img600/917/img3850e.jpg)
look how tight the skirt is to the arch
![[Image: img3851v.jpg]](http://img233.imageshack.us/img233/313/img3851v.jpg)
(make sure its fitted... mount.....then arch then skirt)
when you tighten the bolt the shape inside of the arch lip really pulls the skirt in
job done it and you dont have that funny hole...:thumbup::thumbup::thumbup:
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
well as yous know i bought bandits skirts off him and as yous know their is no fitting kit sold..
so you have to stick the skirts on with 3m tape but at the rear arch their is two holes but you can only use one due to the other being too far away from the arch lip..well i fitted daves skirts for him and one of the skirts came with part of the mounting kit..i forgot i had this till i was sweeping up the garage..
i thought to myself i could make that....
so heres how....
the hole at the back arch
the mounting off daves skirt
the metal i used to make the mount
the metal cut
my mountings fitted with speed clips beside the trd mounting
mountings all painted
all fitted
look how tight the skirt is to the arch
(make sure its fitted... mount.....then arch then skirt)
when you tighten the bolt the shape inside of the arch lip really pulls the skirt in
job done it and you dont have that funny hole...:thumbup::thumbup::thumbup:
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Cool stuff :thumbup: Can you make a couple up for me? :wink: I'll pay whatever for the materials
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
i think i have enough of that metal bar left to make you a set mate..if you come to mine once they are made ill fit them...as the size varies from car to car and i have a grinder at the house
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Many thanks!edit: ruddy thing won't let me rep you again till I rep other people...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
:thumbup: Works for me matey Many thanks!
edit: ruddy thing won't let me rep you again till I rep other people...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Just to check, that little clip you've made is wedged down the back of the arch lip, and then sandwiches the arch lip between the clip and the skirt yes?
sprinter2012
13-08-2018, 06:36 AM #5Just found this post while looking for the fitting guide as I've got myself some skirts now.
Just to check, that little clip you've made is wedged down the back of the arch lip, and then sandwiches the arch lip between the clip and the skirt yes?
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Correct mate ...it pulls the skirt tight into the arch..the ones I made are the same as the trd ones...
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
sprinter2012
13-08-2018, 07:14 AM #7Spot on, I'll have a go at making a couple at work on Monday. Rep added for the thread :thumbup1:
3 Guest(s)
3 Guest(s)
Views 776
Last Post by