JapCarForum Trade Area Trade Archive Selling Archive MR2 garage clearout - Some nice goodies

MR2 garage clearout - Some nice goodies

MR2 garage clearout - Some nice goodies

Pages (4): 1 2 3 4 Next
BOOSST
Banned
1,080
24-08-2018, 11:02 AM
#1
Ok, getting some severe stick to clear some of the garage, so have a look and see what you might fancy. Delivery or pick up can be arranged.

Rogue Revision6 Led Lights. £300
Now discontinued and becoming a rare item. Centre Panel has a camera in it, not 100% sure if it works, and also has the veilside badge on it.
[Image: rev6_12.jpg]

Front Bumper SOLD TO OUTLAW MEMBER
This is a US spec, not very many in this country. Never been fitted, so don’t know id it needs any fabrication to fit. Its in gel cote white.
[Image: P1010763.jpg]

Turbo Engine Lid with Rain tray £45 ono
Good condition in standard black
[Image: P1010986.jpg]

Carbon Engine Lid (Partial) SOLD TO OUTLAW MEMBER
This was left over from some mods I did a while back.
[Image: P1010966.jpg]
[Image: P1010963.jpg]
[Image: P1010962.jpg]
[Image: P1010964.jpg]
How it could look on a standard Engine lid..
[Image: P1010965.jpg]

Carbon Fibre Centre Panel with Light sections & gold GT Badge £55 ono
This was adapted to fit on a Rev2, hence the light housing trimmed. Just requires some LED’s inserted.
[Image: P1010789.jpg]
[Image: P1010791.jpg]
[Image: P1010790.jpg]

HKS Mushroom Intake in white £30
[Image: P1010420.jpg]
[Image: P1010422.jpg]

HKS Gauges 60mm in Black n Red. £35 Exhaust temp and Boost
[Image: P1010037.jpg]
[Image: P1010036.jpg]
[Image: P1010034.jpg]
[Image: P1010033.jpg]

Turbo ECU Rev 2 £40
[Image: P1010044.jpg]

Single Din Coins/Drinks holder £15
[Image: P1010045.jpg]
[Image: P1010046.jpg]

I also have two sets of engine inspection panels.
Set 1 are in black with subtle fleck in the paint.. £25
Set 2 are in pure chrome £120 and mint condition. SOLD TO OUTLAW MEMBER
99% I have a set of REV 3 lights as well somewhere, let me know if interested and I can dig them out.
Edited 31-10-2011, 02:58 PM by BOOSST.
BOOSST
24-08-2018, 11:02 AM #1

Ok, getting some severe stick to clear some of the garage, so have a look and see what you might fancy. Delivery or pick up can be arranged.

Rogue Revision6 Led Lights. £300
Now discontinued and becoming a rare item. Centre Panel has a camera in it, not 100% sure if it works, and also has the veilside badge on it.
[Image: rev6_12.jpg]

Front Bumper SOLD TO OUTLAW MEMBER
This is a US spec, not very many in this country. Never been fitted, so don’t know id it needs any fabrication to fit. Its in gel cote white.
[Image: P1010763.jpg]

Turbo Engine Lid with Rain tray £45 ono
Good condition in standard black
[Image: P1010986.jpg]

Carbon Engine Lid (Partial) SOLD TO OUTLAW MEMBER
This was left over from some mods I did a while back.
[Image: P1010966.jpg]
[Image: P1010963.jpg]
[Image: P1010962.jpg]
[Image: P1010964.jpg]
How it could look on a standard Engine lid..
[Image: P1010965.jpg]

Carbon Fibre Centre Panel with Light sections & gold GT Badge £55 ono
This was adapted to fit on a Rev2, hence the light housing trimmed. Just requires some LED’s inserted.
[Image: P1010789.jpg]
[Image: P1010791.jpg]
[Image: P1010790.jpg]

HKS Mushroom Intake in white £30
[Image: P1010420.jpg]
[Image: P1010422.jpg]

HKS Gauges 60mm in Black n Red. £35 Exhaust temp and Boost
[Image: P1010037.jpg]
[Image: P1010036.jpg]
[Image: P1010034.jpg]
[Image: P1010033.jpg]

Turbo ECU Rev 2 £40
[Image: P1010044.jpg]

Single Din Coins/Drinks holder £15
[Image: P1010045.jpg]
[Image: P1010046.jpg]

I also have two sets of engine inspection panels.
Set 1 are in black with subtle fleck in the paint.. £25
Set 2 are in pure chrome £120 and mint condition. SOLD TO OUTLAW MEMBER
99% I have a set of REV 3 lights as well somewhere, let me know if interested and I can dig them out.

Fozzy
Posting Freak
1,132
24-08-2018, 11:34 AM
#2
I still want the bumper....:whistling:

2009 JAE Car Pull Runner Up
2010 JAE Car Pull Failure

My Garage
Fozzy
24-08-2018, 11:34 AM #2

I still want the bumper....:whistling:


2009 JAE Car Pull Runner Up
2010 JAE Car Pull Failure

My Garage

Gr1NcH
Member
209
24-08-2018, 11:37 AM
#3
Ooooooo loads of stuff there I'd like but would end up not feeding the family for a month Wink
Gr1NcH
24-08-2018, 11:37 AM #3

Ooooooo loads of stuff there I'd like but would end up not feeding the family for a month Wink

BOOSST
Banned
1,080
24-08-2018, 11:38 AM
#4
Hurricane I still want the bumper....:whistling:

You have wanted that ruddy bumper for 8 months or so :w00t: I have sat on it for ages ya tart.. and put off another buyer not long ago.. :lol:

Get ya act together Big Grin
BOOSST
24-08-2018, 11:38 AM #4

Hurricane I still want the bumper....:whistling:

You have wanted that ruddy bumper for 8 months or so :w00t: I have sat on it for ages ya tart.. and put off another buyer not long ago.. :lol:

Get ya act together Big Grin

BOOSST
Banned
1,080
24-08-2018, 11:39 AM
#5
Gr1NcH Ooooooo loads of stuff there I'd like but would end up not feeding the family for a month Wink

Needs must....:laugh:
BOOSST
24-08-2018, 11:39 AM #5

Gr1NcH Ooooooo loads of stuff there I'd like but would end up not feeding the family for a month Wink

Needs must....:laugh:

Sparkystav
Administrator
14,683
24-08-2018, 11:39 AM
#6
hmm, could i turn the carbon engine lid into a diffuser? hmm

OutlawJapClub Admin Team
Sparkystav
24-08-2018, 11:39 AM #6

hmm, could i turn the carbon engine lid into a diffuser? hmm


OutlawJapClub Admin Team

BOOSST
Banned
1,080
24-08-2018, 11:41 AM
#7
If anyone genuinely wants something but its just bad timing with the piggy bank, i don't mind holding onto things with a deposit or even trust you to have the part and pay me later..

But.. NOT FOR 8 MONTHS PETE :lol:
BOOSST
24-08-2018, 11:41 AM #7

If anyone genuinely wants something but its just bad timing with the piggy bank, i don't mind holding onto things with a deposit or even trust you to have the part and pay me later..

But.. NOT FOR 8 MONTHS PETE :lol:

BOOSST
Banned
1,080
24-08-2018, 11:42 AM
#8
Sparkystav hmm, could i turn the carbon engine lid into a diffuser? hmm

I had the same thought, but didn't look right with the massive space on MR2.. but did take some pics, willl dig them out so you can see... :thumbup1:
BOOSST
24-08-2018, 11:42 AM #8

Sparkystav hmm, could i turn the carbon engine lid into a diffuser? hmm

I had the same thought, but didn't look right with the massive space on MR2.. but did take some pics, willl dig them out so you can see... :thumbup1:

BOOSST
Banned
1,080
24-08-2018, 11:54 AM
#9
BOOSST I had the same thought, but didn't look right with the massive space on MR2.. but did take some pics, willl dig them out so you can see... :thumbup1:

Just realised those pics were on my old laptop, so not got them anymore
BOOSST
24-08-2018, 11:54 AM #9

BOOSST I had the same thought, but didn't look right with the massive space on MR2.. but did take some pics, willl dig them out so you can see... :thumbup1:

Just realised those pics were on my old laptop, so not got them anymore

Sparkystav
Administrator
14,683
24-08-2018, 11:55 AM
#10
hmm, got some dimensions mate, will measure up the Lex

OutlawJapClub Admin Team
Sparkystav
24-08-2018, 11:55 AM #10

hmm, got some dimensions mate, will measure up the Lex


OutlawJapClub Admin Team

Pages (4): 1 2 3 4 Next
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 25
Views 827
24-07-2020, 06:21 AM
Last Post by CammyGrieve
Replies 4
Views 568
31-07-2019, 02:24 PM
Last Post by shorty
Replies 8
Views 587
26-07-2019, 02:55 PM
Last Post by shorty
Replies 2
Views 348
26-07-2019, 12:45 PM
Last Post by shorty
Replies 16
Views 1,373
07-01-2019, 02:43 AM
Last Post by Anees
Replies 0
Views 203
14-09-2018, 09:50 AM
Last Post by toxo