Eventually, the SMD LED angel eyes are complete
Eventually, the SMD LED angel eyes are complete
I do have the chance to possibly sort out a group buy for these subject to enough interest and admin approval or I can put you in touch with the man I bought them from. I must say though, they aren't cheap but then your paying for quality (in my opinion!)
These particular angel eyes are different in the fact that they don't need an external voltage regulator and have resistors every 3 led's to keep them stable.
Anyway, some pictures:
I split the headlights in the oven 100c for about 5 mins and while I was doing that I got the old woman cleaning out out all the old glue using her old hairdryer :lol:
![[Image: 2ba018b0.jpg]](http://i101.photobucket.com/albums/m75/northernmonkey0_0/2ba018b0.jpg)
While she was doing that, I sanded, primed and painted the inside and fitted the angel eyes. These are very easy, just drill a tiny hole to pass the wires through and stick them down with the attached 3M tape.
![[Image: ae033fbd.jpg]](http://i101.photobucket.com/albums/m75/northernmonkey0_0/ae033fbd.jpg)
I then stuck them back together using black silicon sealant pump into the channel that was left after removing the old glue. If there is some glue left, then reheat the unit to soften the old glue and it makes it easier to push the lens back fully home. I also de-tangoed at this point but i'm not over happy with the bulbs I chose so I aim to change them.
![[Image: b945b8b1.jpg]](http://i101.photobucket.com/albums/m75/northernmonkey0_0/b945b8b1.jpg)
As each of the rings come with 2 wires (obviously!) I decided to solder them together to clean up the wiring into the car. I then refitted them, wired them to the sidelights and the result was this during the day (not the best photos!)
![[Image: df124e3f.jpg]](http://i101.photobucket.com/albums/m75/northernmonkey0_0/df124e3f.jpg)
and this in the evening
![[Image: e61567fe.jpg]](http://i101.photobucket.com/albums/m75/northernmonkey0_0/e61567fe.jpg)
I must say they are very bright, even in the day and personally I much prefer them to CCFL's.
Anyway, if there is enough interest, I'll make the call to find out a price but expect them to be around $200 (american). I will say that there are cheaper available, but these do come with external voltage regualtors or poor quality. Also, the after sales back up from this guy is top notch, even given the time difference he will email back asap, or you can call him and he will normally answer.
If there's only a few then I'll put you in touch.
northernmonkey
11-09-2018, 02:14 AM #1I'm not going to post a how to as there are many many of these available on the tinterweb but i will post a few photos of my experience with them and how they looked.
I do have the chance to possibly sort out a group buy for these subject to enough interest and admin approval or I can put you in touch with the man I bought them from. I must say though, they aren't cheap but then your paying for quality (in my opinion!)
These particular angel eyes are different in the fact that they don't need an external voltage regulator and have resistors every 3 led's to keep them stable.
Anyway, some pictures:
I split the headlights in the oven 100c for about 5 mins and while I was doing that I got the old woman cleaning out out all the old glue using her old hairdryer :lol:
While she was doing that, I sanded, primed and painted the inside and fitted the angel eyes. These are very easy, just drill a tiny hole to pass the wires through and stick them down with the attached 3M tape.
I then stuck them back together using black silicon sealant pump into the channel that was left after removing the old glue. If there is some glue left, then reheat the unit to soften the old glue and it makes it easier to push the lens back fully home. I also de-tangoed at this point but i'm not over happy with the bulbs I chose so I aim to change them.
As each of the rings come with 2 wires (obviously!) I decided to solder them together to clean up the wiring into the car. I then refitted them, wired them to the sidelights and the result was this during the day (not the best photos!)
and this in the evening
I must say they are very bright, even in the day and personally I much prefer them to CCFL's.
Anyway, if there is enough interest, I'll make the call to find out a price but expect them to be around $200 (american). I will say that there are cheaper available, but these do come with external voltage regualtors or poor quality. Also, the after sales back up from this guy is top notch, even given the time difference he will email back asap, or you can call him and he will normally answer.
If there's only a few then I'll put you in touch.
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Look pretty good...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
![[Image: img1068m.jpg]](http://img18.imageshack.us/img18/9548/img1068m.jpg)
![[Image: img1105c.jpg]](http://img707.imageshack.us/img707/8610/img1105c.jpg)
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
i do like them but i think im going to go for is300 head lights or their is a projector kit now available which is a direct fit no cutting or butchering the lights so i might just go for that..
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
their you go mate
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
http://www.theretrofitsource.com/images/...ectors.jpg
their you go mate
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
speedfreek Where are those projectors from Ormi? I like those a lot!
A guy on the other side did a how-to guide on fitting those
http://www.theretrofitsource.com/product...ts_id=3181
sprinter2012
11-09-2018, 05:38 AM #6speedfreek Where are those projectors from Ormi? I like those a lot!
A guy on the other side did a how-to guide on fitting those
http://www.theretrofitsource.com/product...ts_id=3181
I think they'd match the LED strips in my bumper nicely.
sprinter2012
11-09-2018, 05:39 AM #7Good work on the SMD's, I'd definitely be up for a set if you arrange some sort of group buy I think they'd match the LED strips in my bumper nicely.
el_bandido
11-09-2018, 11:12 AM #9I want a set. Remind me when you do a group buy! The CCFL ones I've got are ok, not as nice looking as those though.
1 Guest(s)
1 Guest(s)
Views 1,318
Last Post by
Views 3,409
Last Post by
Views 592
Last Post by