Central heating leak
Central heating leak
Have tried a pot or two of sealer through the system, but I keep losing pressure.
:-(
Ok guys and gals I need some help. I obviously have a hole in my central heating somewhere. I'm guessing it's not upstairs as I would expect to see damp ceilings etc, so must assume it is under my wooden floors downstairs. Any ideas how I can find it without lifting my floors all up. it's t n g flooring so if i lift it, I'm likely going to trash it. (not a bill I want just before Xmas).
Have tried a pot or two of sealer through the system, but I keep losing pressure.
:-(
Check simple things first like all the bleed valves on your rads are shut. There should be a system drain somewhere, check that the tap hasnt developed a dribble, as this can bleed the pressure away. There is no surefire way of finding the leak unless you have water somewhere it shouldnt be.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
04-11-2018, 12:03 PM #3Give Dean a PM - he should be able to help also.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
04-11-2018, 05:08 PM #5Try shutting the downstairs rads off one at once may help identify where it is.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Interestingly I first had a problem of losing pressure (valve) then shortly after had a problem of too much pressure (faulty filling loop)!
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
I had the same problem not that long ago with a faulty pressure valve - always best to check everything around the boiler first as faults are generally around there.
Interestingly I first had a problem of losing pressure (valve) then shortly after had a problem of too much pressure (faulty filling loop)!
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
parthiban I had the same problem not that long ago with a faulty pressure valve - always best to check everything around the boiler first as faults are generally around there.
Interestingly I first had a problem of losing pressure (valve) then shortly after had a problem of too much pressure (faulty filling loop)!
Sounds very familiar to my prob.. Not losing pressure anymore so I'm thinking leak may not actually have been a leak. The prssure however goes up 1.5 to 2 bar from cold to hot. Everything i have read says its should only go up 1/4 to 1/2 bar. However, now also my pump whines and rumbles each time it clicks on and off.. Any ideas peeps?
parthiban I had the same problem not that long ago with a faulty pressure valve - always best to check everything around the boiler first as faults are generally around there.
Interestingly I first had a problem of losing pressure (valve) then shortly after had a problem of too much pressure (faulty filling loop)!
Sounds very familiar to my prob.. Not losing pressure anymore so I'm thinking leak may not actually have been a leak. The prssure however goes up 1.5 to 2 bar from cold to hot. Everything i have read says its should only go up 1/4 to 1/2 bar. However, now also my pump whines and rumbles each time it clicks on and off.. Any ideas peeps?
2 Guest(s)
2 Guest(s)
Views 51
Last Post by