Club Discount and RRP Price Adjustment in March
Club Discount and RRP Price Adjustment in March
15-12-2018, 06:45 PM
I have not set a date on when this offer will finish, but I will give ample warning before I take the offer off.
How to get discount off MeisterR Coilovers?
Simple order the coilovers out want from our CyberSpeeds Webshop.
http://www.cyberspeeds.com
On Check Out, just enter the voucher code OUTLAW
This will apply the 10% discount... Simple.
Advance Notice:
Due to raising cost, the RRP of the MeisterR Coilovers will be adjusted at 1st of March.
Therefore if anyone is interested in getting coilovers, it would be good to try to purchase them before the RRP goes up.
As a trader on the OUTLAW Forum, I would like to offer a 10% discount to OUTLAW Members on MeisterR Coilovers.
I have not set a date on when this offer will finish, but I will give ample warning before I take the offer off.
How to get discount off MeisterR Coilovers?
Simple order the coilovers out want from our CyberSpeeds Webshop.
http://www.cyberspeeds.com
On Check Out, just enter the voucher code OUTLAW
This will apply the 10% discount... Simple.
Advance Notice:
Due to raising cost, the RRP of the MeisterR Coilovers will be adjusted at 1st of March.
Therefore if anyone is interested in getting coilovers, it would be good to try to purchase them before the RRP goes up.
27-12-2018, 10:27 AM
Rabster can you offer info on the 350z ones any reviews on them etc
We done a few 350Z already.
We have 2 specs, Zeta-S and Zeta-R
Zeta-S: Standard in-board rear springs fitment.
Bolt straight on to the car, and will do pretty much everything well.
Pretty much same as most coilovers you see fitment wise, but of course with our specification.
Comes with Front and Rear Aluminium Top Mount with Rubber bush insert.
Springs rate are: Front 10kg/mm, Rear 8kg/mm
Zeta-R: True Coilovers fitment with the rear springs relocated to the dampers.
Bolt on to the car, comes with a new adjustable rear lower arms that will replace the standard lower arms, will also allow adjustments of the rear toe.
This retain the dual perch design and allow easier adjustments and springs rate changes in the rear.
The front is the same.
Springs rate changes in the rear is because of the relocation, the actual wheel rate will remain near to the Zeta-S setup.
Comes with Front Pillowball Top Mount and Rear Aluminium Top Mount with rubber bush insert
Springs rate: Front 10kg/mm, Rear 5kg/mm
Both have been tested and will work well, depends on what you want to do and your budget.
If you really want to lower your car, the Zeta-R is a good one to go for as it will make it easier, retain more travel, and also give proper toe adjustments were the standard arms can run out.
Rabster can you offer info on the 350z ones any reviews on them etc
We done a few 350Z already.
We have 2 specs, Zeta-S and Zeta-R
Zeta-S: Standard in-board rear springs fitment.
Bolt straight on to the car, and will do pretty much everything well.
Pretty much same as most coilovers you see fitment wise, but of course with our specification.
Comes with Front and Rear Aluminium Top Mount with Rubber bush insert.
Springs rate are: Front 10kg/mm, Rear 8kg/mm
Zeta-R: True Coilovers fitment with the rear springs relocated to the dampers.
Bolt on to the car, comes with a new adjustable rear lower arms that will replace the standard lower arms, will also allow adjustments of the rear toe.
This retain the dual perch design and allow easier adjustments and springs rate changes in the rear.
The front is the same.
Springs rate changes in the rear is because of the relocation, the actual wheel rate will remain near to the Zeta-S setup.
Comes with Front Pillowball Top Mount and Rear Aluminium Top Mount with rubber bush insert
Springs rate: Front 10kg/mm, Rear 5kg/mm
Both have been tested and will work well, depends on what you want to do and your budget.
If you really want to lower your car, the Zeta-R is a good one to go for as it will make it easier, retain more travel, and also give proper toe adjustments were the standard arms can run out.
24-01-2019, 11:31 AM
Rabster What's the best price on the 350z shocks including fitting etc
I don't actually do fitting, but I do have local affiliate who can.
Where are you located?
Also also depends on what type of fitting you want, and do you want tracking also?
Finally, I have 2 different type for 350Z (Zeta-S and Zeta-R).
Depends on what you need... Zeta-S will do the job for most people...
Zeta-R is a bit of trick kit as it convert the rear in board springs to a true coilovers setup.
Let me know and I'll try to get you some quote.
Best Regards,
Jerrick
Rabster What's the best price on the 350z shocks including fitting etc
I don't actually do fitting, but I do have local affiliate who can.
Where are you located?
Also also depends on what type of fitting you want, and do you want tracking also?
Finally, I have 2 different type for 350Z (Zeta-S and Zeta-R).
Depends on what you need... Zeta-S will do the job for most people...
Zeta-R is a bit of trick kit as it convert the rear in board springs to a true coilovers setup.
Let me know and I'll try to get you some quote.
Best Regards,
Jerrick
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 0
Views 105
Views 105
27-05-2023, 06:12 AM
Last Post byMeisterR
Last Post by
Replies 2
Views 208
Views 208
06-11-2022, 01:28 AM
Last Post byRabster
Last Post by
Replies 0
Views 128
Views 128
10-02-2022, 04:14 AM
Last Post byMeisterR
Last Post by