shaunietay's UK integra 98 spec DC2
shaunietay's UK integra 98 spec DC2
16" JDM DC2 alloys
JDM tubular exhaust manifold
20mm lowering springs
blueflame backbox
JDM hi flo cat
HID kit
![[Image: 19022010074.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/19022010074.jpg)
for a while nothing was done apart from the little niggly bits like servicing and rust, some joker though it was good to hide a hole, so it was cut out and rewelded, one the driver side and both sides shot blasted, and resprayed:
![[Image: SP_A0143.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/SP_A0143.jpg)
since then I did do a test with the alloys to see what they would look like with the colours inverted:
![[Image: DSC_0307jpgjpgDSC_0307-1.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/DSC_0307jpgjpgDSC_0307-1.jpg)
all i have done since then is small mods with the only big mod being ferrodo pads on the front. now that money has freed up a bit I am either looking at replacing my exhaust system with toda and changing the springs for fully adjustable coilovers. I have priced up a K20 conversion but only an idea at present. i have kept it as standard as possible on the outside as they look amazing.
here is some photoshoots that i have done with a small company called epix media. hope you enjoy the bits so far.
feedback appreciated
![[Image: teg_6.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/teg_6.jpg)
![[Image: tegs_1.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/tegs_1.jpg)
![[Image: teg_8.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/teg_8.jpg)
![[Image: tegs_4.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/tegs_4.jpg)
![[Image: tegs_3.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/tegs_3.jpg)
![[Image: teg_2.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/teg_2.jpg)
![[Image: teg_1.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/teg_1.jpg)
![[Image: teg_bw.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/teg_bw.jpg)
![[Image: teg_vignette.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/teg_vignette.jpg)
![[Image: teg_poster2.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/teg_poster2.jpg)
![[Image: DSC_0321jpgjpgDSC_0321.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/DSC_0321jpgjpgDSC_0321.jpg)
shaunietay
05-01-2019, 06:07 AM #1I purchased this car back in october 2009 a UKDM honda integra 98' DC2 with a few mods on ( save on the pocket a bit) :
16" JDM DC2 alloys
JDM tubular exhaust manifold
20mm lowering springs
blueflame backbox
JDM hi flo cat
HID kit
for a while nothing was done apart from the little niggly bits like servicing and rust, some joker though it was good to hide a hole, so it was cut out and rewelded, one the driver side and both sides shot blasted, and resprayed:
since then I did do a test with the alloys to see what they would look like with the colours inverted:
all i have done since then is small mods with the only big mod being ferrodo pads on the front. now that money has freed up a bit I am either looking at replacing my exhaust system with toda and changing the springs for fully adjustable coilovers. I have priced up a K20 conversion but only an idea at present. i have kept it as standard as possible on the outside as they look amazing.
here is some photoshoots that i have done with a small company called epix media. hope you enjoy the bits so far.
feedback appreciated
Pics are really good
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
![[Image: 15062011129.jpg]](http://i110.photobucket.com/albums/n107/shaunietay/15062011129.jpg)
also forgot to mention i did shell out on uprated coolant and breather hoses
shaunietay
05-01-2019, 06:19 AM #3forgot to show off my lump :thumbup:
also forgot to mention i did shell out on uprated coolant and breather hoses
Really like the colour of the wheels, works really well. Looks as though you have looked after it well turning it into a nice fresh example.
Its always good to see proper pictures, instead of naff phone pics, good job!!
Plan's sound good too, I've looked into these and the only downside is that Honda tuning is so expensive (well more than most I've seen)... It wouldn't put me off having one though! One of my favourite Jap cars.
I believe the Honda chaps might errupt into a B18 vs K20 debate!!! :lol:
I'm sure Pat will inform you tonight, but there is a show coming up in May at the Lincolnshire show ground, this might be off interest to you! I'm sure OJC would love you there!
It is a pure beauty!
Really like the colour of the wheels, works really well. Looks as though you have looked after it well turning it into a nice fresh example.
Its always good to see proper pictures, instead of naff phone pics, good job!!
Plan's sound good too, I've looked into these and the only downside is that Honda tuning is so expensive (well more than most I've seen)... It wouldn't put me off having one though! One of my favourite Jap cars.
I believe the Honda chaps might errupt into a B18 vs K20 debate!!! :lol:
I'm sure Pat will inform you tonight, but there is a show coming up in May at the Lincolnshire show ground, this might be off interest to you! I'm sure OJC would love you there!
SIDEWAYS IS THE ONLY WAY!!!
Nissan 200sx S14A (Project Baby BEL)
http://www.outlawjapclub.co.uk/forum/sho...php?t=9894
Thats nice mate, its a stunning white on those integra's. Look forward to having a good nosey tonight.
SIDEWAYS IS THE ONLY WAY!!!
Nissan 200sx S14A (Project Baby BEL)
http://www.outlawjapclub.co.uk/forum/sho...php?t=9894
Welcome along mate is a lovely looking teggy you have there although always prefered the look of the JDM DC2
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
05-01-2019, 06:57 AM #8must resist 'Vtec just kicked in yo' jokes
Welcome along mate is a lovely looking teggy you have there although always prefered the look of the JDM DC2
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
I do like those wheels in red i must say
[SIGPIC][/SIGPIC]
[COLOR="Orange"]JAPANESE PERFORMANCE FEATURE SEPT 2011
BEST OVERALL SUPRA WINNER ACE CAFE 23/06/11
2nd BEST IN SHOW (JAE 2011)
3rd BEST MODIFIED (JAE 2011)
[/COLOR]
[COLOR="Orange"]See my build thread here
[/COLOR]
http://www.outlawjapclub.co.uk/forum/sho...php?t=5851
Very nice mate, a friend of mine has one of these but needs a little TLC
I do like those wheels in red i must say
[SIGPIC][/SIGPIC]
[COLOR="Orange"]JAPANESE PERFORMANCE FEATURE SEPT 2011
BEST OVERALL SUPRA WINNER ACE CAFE 23/06/11
2nd BEST IN SHOW (JAE 2011)
3rd BEST MODIFIED (JAE 2011)
[/COLOR]
[COLOR="Orange"]See my build thread here
[/COLOR]
http://www.outlawjapclub.co.uk/forum/sho...php?t=5851
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Looks great, always loved the integras...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
4 Guest(s)
4 Guest(s)
Views 1,235
Last Post by