JapCarForum Cars, Cars, Cars! Project Cars shaunietay's UK integra 98 spec DC2

shaunietay's UK integra 98 spec DC2

shaunietay's UK integra 98 spec DC2

Pages (3): 1 2 3 Next
shaunietay
Junior Member
24
05-01-2019, 06:07 AM
#1
I purchased this car back in october 2009 a UKDM honda integra 98' DC2 with a few mods on ( save on the pocket a bit) :

16" JDM DC2 alloys
JDM tubular exhaust manifold
20mm lowering springs
blueflame backbox
JDM hi flo cat
HID kit

[Image: 19022010074.jpg]

for a while nothing was done apart from the little niggly bits like servicing and rust, some joker though it was good to hide a hole, so it was cut out and rewelded, one the driver side and both sides shot blasted, and resprayed:

[Image: SP_A0143.jpg]

since then I did do a test with the alloys to see what they would look like with the colours inverted:

[Image: DSC_0307jpgjpgDSC_0307-1.jpg]

all i have done since then is small mods with the only big mod being ferrodo pads on the front. now that money has freed up a bit I am either looking at replacing my exhaust system with toda and changing the springs for fully adjustable coilovers. I have priced up a K20 conversion but only an idea at present. i have kept it as standard as possible on the outside as they look amazing.
here is some photoshoots that i have done with a small company called epix media. hope you enjoy the bits so far.

feedback appreciated

[Image: teg_6.jpg]

[Image: tegs_1.jpg]

[Image: teg_8.jpg]

[Image: tegs_4.jpg]

[Image: tegs_3.jpg]

[Image: teg_2.jpg]

[Image: teg_1.jpg]

[Image: teg_bw.jpg]

[Image: teg_vignette.jpg]

[Image: teg_poster2.jpg]

[Image: DSC_0321jpgjpgDSC_0321.jpg]
shaunietay
05-01-2019, 06:07 AM #1

I purchased this car back in october 2009 a UKDM honda integra 98' DC2 with a few mods on ( save on the pocket a bit) :

16" JDM DC2 alloys
JDM tubular exhaust manifold
20mm lowering springs
blueflame backbox
JDM hi flo cat
HID kit

[Image: 19022010074.jpg]

for a while nothing was done apart from the little niggly bits like servicing and rust, some joker though it was good to hide a hole, so it was cut out and rewelded, one the driver side and both sides shot blasted, and resprayed:

[Image: SP_A0143.jpg]

since then I did do a test with the alloys to see what they would look like with the colours inverted:

[Image: DSC_0307jpgjpgDSC_0307-1.jpg]

all i have done since then is small mods with the only big mod being ferrodo pads on the front. now that money has freed up a bit I am either looking at replacing my exhaust system with toda and changing the springs for fully adjustable coilovers. I have priced up a K20 conversion but only an idea at present. i have kept it as standard as possible on the outside as they look amazing.
here is some photoshoots that i have done with a small company called epix media. hope you enjoy the bits so far.

feedback appreciated

[Image: teg_6.jpg]

[Image: tegs_1.jpg]

[Image: teg_8.jpg]

[Image: tegs_4.jpg]

[Image: tegs_3.jpg]

[Image: teg_2.jpg]

[Image: teg_1.jpg]

[Image: teg_bw.jpg]

[Image: teg_vignette.jpg]

[Image: teg_poster2.jpg]

[Image: DSC_0321jpgjpgDSC_0321.jpg]

Lexuspat
Administrator
6,827
05-01-2019, 06:15 AM
#2
looks stunning shaun cant wait to see it in the flesh tonight.

Pics are really good

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
05-01-2019, 06:15 AM #2

looks stunning shaun cant wait to see it in the flesh tonight.

Pics are really good


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

shaunietay
Junior Member
24
05-01-2019, 06:19 AM
#3
forgot to show off my lump :thumbup:

[Image: 15062011129.jpg]

also forgot to mention i did shell out on uprated coolant and breather hoses
shaunietay
05-01-2019, 06:19 AM #3

forgot to show off my lump :thumbup:

[Image: 15062011129.jpg]

also forgot to mention i did shell out on uprated coolant and breather hoses

N15_GTi
Senior Member
268
05-01-2019, 06:25 AM
#4
It is a pure beauty!

Really like the colour of the wheels, works really well. Looks as though you have looked after it well turning it into a nice fresh example.

Its always good to see proper pictures, instead of naff phone pics, good job!!

Plan's sound good too, I've looked into these and the only downside is that Honda tuning is so expensive (well more than most I've seen)... It wouldn't put me off having one though! One of my favourite Jap cars.

I believe the Honda chaps might errupt into a B18 vs K20 debate!!! :lol:

I'm sure Pat will inform you tonight, but there is a show coming up in May at the Lincolnshire show ground, this might be off interest to you! I'm sure OJC would love you there!
N15_GTi
05-01-2019, 06:25 AM #4

It is a pure beauty!

Really like the colour of the wheels, works really well. Looks as though you have looked after it well turning it into a nice fresh example.

Its always good to see proper pictures, instead of naff phone pics, good job!!

Plan's sound good too, I've looked into these and the only downside is that Honda tuning is so expensive (well more than most I've seen)... It wouldn't put me off having one though! One of my favourite Jap cars.

I believe the Honda chaps might errupt into a B18 vs K20 debate!!! :lol:

I'm sure Pat will inform you tonight, but there is a show coming up in May at the Lincolnshire show ground, this might be off interest to you! I'm sure OJC would love you there!

eogbaker
Member
148
05-01-2019, 06:25 AM
#5
nice car mate...
eogbaker
05-01-2019, 06:25 AM #5

nice car mate...

N15_GTi
Senior Member
268
05-01-2019, 06:26 AM
#6
Oh, and a very nice lump you have there... But for some reason I have to stand on my head to see it properly! :lol:
N15_GTi
05-01-2019, 06:26 AM #6

Oh, and a very nice lump you have there... But for some reason I have to stand on my head to see it properly! :lol:

Mr Rae
Member
208
05-01-2019, 06:33 AM
#7
Thats nice mate, its a stunning white on those integra's. Look forward to having a good nosey tonight.

SIDEWAYS IS THE ONLY WAY!!!

Nissan 200sx S14A (Project Baby BEL)
http://www.outlawjapclub.co.uk/forum/sho...php?t=9894
Mr Rae
05-01-2019, 06:33 AM #7

Thats nice mate, its a stunning white on those integra's. Look forward to having a good nosey tonight.


SIDEWAYS IS THE ONLY WAY!!!

Nissan 200sx S14A (Project Baby BEL)
http://www.outlawjapclub.co.uk/forum/sho...php?t=9894

Dan_Turism0
Posting Freak
2,825
05-01-2019, 06:57 AM
#8
must resist 'Vtec just kicked in yo' jokes Big Grin

Welcome along mate is a lovely looking teggy you have there although always prefered the look of the JDM DC2

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
05-01-2019, 06:57 AM #8

must resist 'Vtec just kicked in yo' jokes Big Grin

Welcome along mate is a lovely looking teggy you have there although always prefered the look of the JDM DC2


My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

mplavery
Posting Freak
906
05-01-2019, 07:05 AM
#9
Very nice mate, a friend of mine has one of these but needs a little TLC

I do like those wheels in red i must say

[SIGPIC][/SIGPIC]
[COLOR="Orange"]JAPANESE PERFORMANCE FEATURE SEPT 2011 Big Grin

BEST OVERALL SUPRA WINNER ACE CAFE 23/06/11

2nd BEST IN SHOW (JAE 2011)

3rd BEST MODIFIED (JAE 2011)


[/COLOR]
[COLOR="Orange"]See my build thread here
[/COLOR]
http://www.outlawjapclub.co.uk/forum/sho...php?t=5851
mplavery
05-01-2019, 07:05 AM #9

Very nice mate, a friend of mine has one of these but needs a little TLC

I do like those wheels in red i must say


[SIGPIC][/SIGPIC]
[COLOR="Orange"]JAPANESE PERFORMANCE FEATURE SEPT 2011 Big Grin

BEST OVERALL SUPRA WINNER ACE CAFE 23/06/11

2nd BEST IN SHOW (JAE 2011)

3rd BEST MODIFIED (JAE 2011)


[/COLOR]
[COLOR="Orange"]See my build thread here
[/COLOR]
http://www.outlawjapclub.co.uk/forum/sho...php?t=5851

DaveEdin
Posting Freak
5,657
05-01-2019, 08:47 AM
#10
Looks great, always loved the integras...

IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
DaveEdin
05-01-2019, 08:47 AM #10

Looks great, always loved the integras...


IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake

Pages (3): 1 2 3 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 16
Views 1,236
19-04-2018, 03:48 AM
Last Post by Mikeydinho