TTE Chicane wheels
TTE Chicane wheels
28-07-2016, 08:10 AM
russelllinn
28-07-2016, 08:10 AM #41It's been a long time coming eh Steve but worth the wait, well done mate :thumbup1:
28-07-2016, 09:02 AM
dimis Tony was right, I have the same thing on my car since i fitted coilovers. The only difference my wheels have a very small incline towards the outer of the car (not the center), which i think it should be like that and not the other way round. In any way in both cases you must have the smallest incline otherwise you will damage your tires quickly.
I just checked when my geometry was last set (was when I had TTE lowering springs fitted), and the camber on that wheel was only -0 degrees 52 minutes - so less than one degree of negative camber, which I doubt would be visible ? It may just be an optical illusion, I don't have any reason to believe the geometry would have been messed up (e.g. I haven't hit any kerbs).
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
28-07-2016, 09:02 AM #42dimis Tony was right, I have the same thing on my car since i fitted coilovers. The only difference my wheels have a very small incline towards the outer of the car (not the center), which i think it should be like that and not the other way round. In any way in both cases you must have the smallest incline otherwise you will damage your tires quickly.
I just checked when my geometry was last set (was when I had TTE lowering springs fitted), and the camber on that wheel was only -0 degrees 52 minutes - so less than one degree of negative camber, which I doubt would be visible ? It may just be an optical illusion, I don't have any reason to believe the geometry would have been messed up (e.g. I haven't hit any kerbs).
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
28-07-2016, 09:08 AM
steviewevie I just checked when my geometry was last set (was when I had TTE lowering springs fitted), and the camber on that wheel was only -0 degrees 52 minutes - so less than one degree of negative camber, which I doubt would be visible ? It may just be an optical illusion, I don't have any reason to believe the geometry would have been messed up (e.g. I haven't hit any kerbs).
Maybe then I am wrong mate and it is just an illusion.
LEXUS IS200 - The most fun car to go sideways
steviewevie I just checked when my geometry was last set (was when I had TTE lowering springs fitted), and the camber on that wheel was only -0 degrees 52 minutes - so less than one degree of negative camber, which I doubt would be visible ? It may just be an optical illusion, I don't have any reason to believe the geometry would have been messed up (e.g. I haven't hit any kerbs).
Maybe then I am wrong mate and it is just an illusion.
LEXUS IS200 - The most fun car to go sideways
28-07-2016, 10:27 AM
It doesn't look anywhere near as pronounced in that pic from the front though so maybe it's just the angle the picture was taken at and it's just a barrel effect from the lens?
Looking good fella - I'd just thought the same as Dimis when you see the pic of the car from the back - can you take a pic from another angle please fella as it does look like the top of the back drivers side alloy is sticking out further than the bottom?!
It doesn't look anywhere near as pronounced in that pic from the front though so maybe it's just the angle the picture was taken at and it's just a barrel effect from the lens?
28-07-2016, 10:29 AM
Those are your old wheels, aren't they Aido ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
28-07-2016, 10:29 AM #45I can see what you mean. It doesn't really look like that in the pic from the front though, does it ? I will take another pic tomorrow (too dark now).
Those are your old wheels, aren't they Aido ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
28-07-2016, 10:33 AM
Yeah as for the camber hopefully it'll be fine, I had similar the other way around on the back due to how low the car was, you can see it in the old pics of my IS and it stripped a set of tyres in 5000 miles!
That's right fella, it was Pete Bett's at Thor Racing who'd put them on, then Chris had them and now you - they've not looked that good for a long time though
Yeah as for the camber hopefully it'll be fine, I had similar the other way around on the back due to how low the car was, you can see it in the old pics of my IS and it stripped a set of tyres in 5000 miles!
28-07-2016, 10:44 AM
aido That's right fella, it was Pete Bett's at Thor Racing who'd put them on, then Chris had them and now you - they've not looked that good for a long time though
Yeah as for the camber hopefully it'll be fine, I had similar the other way around on the back due to how low the car was, you can see it in the old pics of my IS and it stripped a set of tyres in 5000 miles!
Yep I agree with Aido, I also had my car too low and I alomst stripped my rear wheels. So I had to increase a bit the height of the car.
LEXUS IS200 - The most fun car to go sideways
aido That's right fella, it was Pete Bett's at Thor Racing who'd put them on, then Chris had them and now you - they've not looked that good for a long time though
Yeah as for the camber hopefully it'll be fine, I had similar the other way around on the back due to how low the car was, you can see it in the old pics of my IS and it stripped a set of tyres in 5000 miles!
Yep I agree with Aido, I also had my car too low and I alomst stripped my rear wheels. So I had to increase a bit the height of the car.
LEXUS IS200 - The most fun car to go sideways
28-07-2016, 10:52 AM
I know what you guys are all talking about with the angle of the wheel, will try get a pic of my car up but I think the same thing on mine every time I see it (the rear wheels sort of look like they're leaning outwards)
Is it something to do with 18" wheels in general? Never thought that when I was on 17s.........
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
Looks fantastic matey :thumbup:
I know what you guys are all talking about with the angle of the wheel, will try get a pic of my car up but I think the same thing on mine every time I see it (the rear wheels sort of look like they're leaning outwards)
Is it something to do with 18" wheels in general? Never thought that when I was on 17s.........
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
28-07-2016, 11:47 AM
Was just looking at the pics of my lex when it had them on and not sure if they looked the same on mine as they do on yours (angle wise?),
even though mine was a bit lower?
Edit: just thought have you been for a drive since you jacked the car up before you took the pics? (so that the shocks have settled back to the original position?)
some pics of them on mine at different angles?
![[Image: DSCF2437.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/DSCF2437.jpg)
![[Image: DSCF2443-1.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/DSCF2443-1.jpg)
![[Image: DSCF2450.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/DSCF2450.jpg)
![[Image: mylexsc1-1.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/mylexsc1-1.jpg)
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Looking very good mate, :thumbup1:
Was just looking at the pics of my lex when it had them on and not sure if they looked the same on mine as they do on yours (angle wise?),
even though mine was a bit lower?
Edit: just thought have you been for a drive since you jacked the car up before you took the pics? (so that the shocks have settled back to the original position?)
some pics of them on mine at different angles?
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
28-07-2016, 11:54 AM
Bandit Edit: just thought have you been for a drive since you jacked the car up before you took the pics? (so that the shocks have settled back to the original position?)I always enjoy seeing those pics of your old car :thumbup1:
Good question, no, I hadn't been for a drive at that point. I've been out in it since, and will take some more pics tomorrow.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
28-07-2016, 11:54 AM #50Bandit Edit: just thought have you been for a drive since you jacked the car up before you took the pics? (so that the shocks have settled back to the original position?)I always enjoy seeing those pics of your old car :thumbup1:
Good question, no, I hadn't been for a drive at that point. I've been out in it since, and will take some more pics tomorrow.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
5 Guest(s)
5 Guest(s)
Recently Browsing
5 Guest(s)
5 Guest(s)
Related Threads…
Replies 18
Views 586
Views 586
28-01-2020, 01:40 AM
Last Post bySparkystav
Last Post by
Replies 15
Views 667
Views 667
22-09-2019, 12:11 PM
Last Post bypaddywak
Last Post by
Replies 4
Views 453
Views 453
06-03-2019, 03:26 AM
Last Post byJonPowellDJ
Last Post by
Replies 1
Views 283
Views 283
03-01-2019, 12:47 PM
Last Post byBandit
Last Post by
Replies 16
Views 749
Views 749
03-09-2018, 12:38 AM
Last Post byStoney
Last Post by
Replies 2
Views 293
Views 293
17-08-2018, 09:16 PM
Last Post byjasons
Last Post by