Pic Request: IS/Altezza with black painted tail lights...

JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Pic Request: IS/Altezza with black painted tail lights...

Pages (2): 1 2 Next

sprinter2012
Posting Freak

2,484

24-01-2019, 03:22 PM

As above, I'm after a picture of an IS200/IS300/Altezza which has stock brake lights, but which have had the chrome bit painted black. Basically the brake light equivalent of the 'JDM Headlights'. Preferably on a black car, as I want to see what they look like before planning my next mod...

Edited 07-03-2012, 12:57 AM by sprinter2012.

sprinter2012

24-01-2019, 03:22 PM #1

sprinter2012
Posting Freak

2,484

24-01-2019, 04:00 PM

I decided I'd have a go at just Photoshopping some pics of my own car which sort of worked. Although I'd still like to see some actual photos...

[Image: DSC02390.jpg]

sprinter2012

24-01-2019, 04:00 PM #2

I decided I'd have a go at just Photoshopping some pics of my own car which sort of worked. Although I'd still like to see some actual photos...

[Image: DSC02390.jpg]

[Image: DSC023901.jpg]

[Image: DSC02391.jpg]

[Image: DSC023911.jpg]

is300_dino
Posting Freak

3,556

24-01-2019, 04:14 PM

blackish car but does the trick

use this and perfect jdm replica's http://www.chromepaint.com/BlackChrome.html

http://www.lextasy.com/is300_jdm_black_t...7_prd1.htm

Edited 07-03-2012, 01:54 AM by is300_dino.

jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place

is300_dino

24-01-2019, 04:14 PM #3

blackish car but does the trick

use this and perfect jdm replica's http://www.chromepaint.com/BlackChrome.html

http://www.lextasy.com/is300_jdm_black_t...7_prd1.htm

jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place

sprinter2012
Posting Freak

2,484

24-01-2019, 04:23 PM

Just remembered I'd seen some before on an american forum, just couldn't remember which thread...

[Image: glossy-05.jpg]

sprinter2012

24-01-2019, 04:23 PM #4

Just remembered I'd seen some before on an american forum, just couldn't remember which thread...

[Image: glossy-05.jpg]

[Image: gallery2farticles2flexudg3.jpg]

Stoney
Posting Freak

2,117

25-01-2019, 01:15 AM

I like it. I may do mine if and when I remove the fly eye tinting.

ad: It was a tough call to make, but the Supercharged IS200 is being retired. Confused

ad:

Stoney

25-01-2019, 01:15 AM #5

I like it. I may do mine if and when I remove the fly eye tinting.

ad: It was a tough call to make, but the Supercharged IS200 is being retired. Confused

ad:

Mikey
Senior Member

714

25-01-2019, 01:31 AM

You carnt just open up the rear lights you have to cut them and glue them back togeather

Mikey

25-01-2019, 01:31 AM #6

You carnt just open up the rear lights you have to cut them and glue them back togeather

S
Banned

1,153

25-01-2019, 02:00 AM

I tried this and messed it up so I just bought them from the dealers

S

25-01-2019, 02:00 AM #7

I tried this and messed it up so I just bought them from the dealers

Stoney
Posting Freak

2,117

25-01-2019, 03:46 AM

Mikey is200/s13 You carnt just open up the rear lights you have to cut them and glue them back togeather

This is why I just tinted them!

ad: It was a tough call to make, but the Supercharged IS200 is being retired. Confused

ad:

Stoney

25-01-2019, 03:46 AM #8

Mikey is200/s13 You carnt just open up the rear lights you have to cut them and glue them back togeather

This is why I just tinted them!

ad: It was a tough call to make, but the Supercharged IS200 is being retired. Confused

ad:

sprinter2012
Posting Freak

2,484

25-01-2019, 12:51 PM

Yee I'm aware they have to be cut open with a dremel to get into them, which is why I've been putting off doing it untill I have something slightly more worthwhile than just paint to put inside them.... Cool

sprinter2012

25-01-2019, 12:51 PM #9

Talisker
Member

118

25-01-2019, 03:29 PM

#10

A while ago I wrote a guide on the LOC, when I converted mine Here.

[Image: DSC00201touched.jpg]

Sorry about the glare and reflections, I hope these pictures are helpful.

Talisker

25-01-2019, 03:29 PM #10

A while ago I wrote a guide on the LOC, when I converted mine Here.

[Image: DSC00201touched.jpg]
[Image: DSC00167.jpg]

Sorry about the glare and reflections, I hope these pictures are helpful.