Cradle Measurements
Cradle Measurements
think the route of copy someones is the best way to go as some people can get them re made in a fairly quike turn around
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
i agree ^^^ until i can get a cradle made im not paying out for other parts
think the route of copy someones is the best way to go as some people can get them re made in a fairly quike turn around
I only work till 4 most days, and boss is there till 7, so I could get a few hours every evening for a week and be pretty close I reckon. Stoney can get me basic tube dims, and ill get some ordered monday so its ready in stock
What we need is a list on here of things like that Pete
Get the size of tube needed up so we can all get our bits together
I believe it mounts with 2x 14mm and 1x 19mm bolts
What size bolts are needed for the supercharger to hold it to the cradle
Hahahahaha,
What we need is a list on here of things like that Pete
Get the size of tube needed up so we can all get our bits together
I believe it mounts with 2x 14mm and 1x 19mm bolts
What size bolts are needed for the supercharger to hold it to the cradle
some bits i have made for my charger project.
[IMG]
![[Image: 6824575676_1ef1c3bc81.jpg]](http://farm8.staticflickr.com/7053/6824575676_1ef1c3bc81.jpg)
Picture 682 by terbert2009, on Flickr[/IMG][IMG][img][url=http://www.flickr.com/photos/43819702@N02/6824551732/]![[Image: 6824551732_80b881dd75_m.jpg]](http://farm8.staticflickr.com/7193/6824551732_80b881dd75_m.jpg)
Picture 696 by terbert2009, on Flickr[IMG]
![[Image: 6970724469_74a3a3524c_m.jpg]](http://farm8.staticflickr.com/7044/6970724469_74a3a3524c_m.jpg)
Picture 703 by terbert2009, on Flickr[/IMG]![[Image: 6970628929_cd2cf26ff1_m.jpg]](http://farm8.staticflickr.com/7066/6970628929_cd2cf26ff1_m.jpg)
Picture 690 by terbert2009, on Flickr[IMG]
![[Image: 6824588180_509157e8dc_m.jpg]](http://farm8.staticflickr.com/7065/6824588180_509157e8dc_m.jpg)
Picture 701 by terbert2009, on Flickr[/IMG][IMG]
![[Image: 6824521916_a01c11c11a_m.jpg]](http://farm8.staticflickr.com/7180/6824521916_a01c11c11a_m.jpg)
Picture 675 by terbert2009, on Flickr[/IMG]this was prob my 5th try at the craddle pain in the bum for sure but all is good now,only need to fit the intercooler and plum it all in,and hopefully all will be good.:thumbup:
buzzard2011
28-01-2019, 03:38 PM #35dont know if this will work,maybee a mod could edit for me.again:whistling:
some bits i have made for my charger project.
[IMG] Picture 682 by terbert2009, on Flickr[/IMG][IMG][img][url=http://www.flickr.com/photos/43819702@N02/6824551732/]
Picture 696 by terbert2009, on Flickr[IMG] Picture 703 by terbert2009, on Flickr[/IMG]
Picture 690 by terbert2009, on Flickr[IMG] Picture 701 by terbert2009, on Flickr[/IMG]
[IMG] Picture 675 by terbert2009, on Flickr[/IMG]
this was prob my 5th try at the craddle pain in the bum for sure but all is good now,only need to fit the intercooler and plum it all in,and hopefully all will be good.:thumbup:
so you start again and make another,just a right pain,the problem is getting all the angles right and alligned with the blot holes at the same time keeping it straight with the pulley.
the first one i thought worked was giving me some vibration through the charger when decelerating,turned out to be missaligned with the manifold.so had to start from scratch again.
but this one works perfect,no vibration and the charger runs sweet as.
buzzard2011
29-01-2019, 04:30 AM #37trial and error mate.lots of measuring,test fitting and then some fettling,then do it all again a few times.then when you think your finaly there something doesnt work and it all turns to dog sh..it.:cursing:
so you start again and make another,just a right pain,the problem is getting all the angles right and alligned with the blot holes at the same time keeping it straight with the pulley.
the first one i thought worked was giving me some vibration through the charger when decelerating,turned out to be missaligned with the manifold.so had to start from scratch again.
but this one works perfect,no vibration and the charger runs sweet as.
buzzard2011 trial and error mate.lots of measuring,test fitting and then some fettling,then do it all again a few times.then when you think your finaly there something doesnt work and it all turns to dog sh..it.:cursing:
so you start again and make another,just a right pain,the problem is getting all the angles right and alligned with the blot holes at the same time keeping it straight with the pulley.
the first one i thought worked was giving me some vibration through the charger when decelerating,turned out to be missaligned with the manifold.so had to start from scratch again.
but this one works perfect,no vibration and the charger runs sweet as.
Don't suppose you have an exact set of tech drawings for it that Pat could borrow? :lol:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
buzzard2011 trial and error mate.lots of measuring,test fitting and then some fettling,then do it all again a few times.then when you think your finaly there something doesnt work and it all turns to dog sh..it.:cursing:
so you start again and make another,just a right pain,the problem is getting all the angles right and alligned with the blot holes at the same time keeping it straight with the pulley.
the first one i thought worked was giving me some vibration through the charger when decelerating,turned out to be missaligned with the manifold.so had to start from scratch again.
but this one works perfect,no vibration and the charger runs sweet as.
Don't suppose you have an exact set of tech drawings for it that Pat could borrow? :lol:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
I'm gonna go speak to my guys tomoz anyway but pictures and measurments would be a massive help
buzzard2011
29-01-2019, 05:28 AM #40sorry guys.have no measurements wrote down,but i will get the tape measure out later,but my craddle is custom so will need some fettling in order for it to fit on another car i think.
3 Guest(s)
3 Guest(s)
Views 410
Last Post by
Views 806
Last Post by
Views 2,819
Last Post by