What's the difference?
What's the difference?
Jaminglish
01-02-2019, 10:06 PM #1Whhat's the difference between the is200 zenon headlight and a normal one? I am looking at pics so unable to tell....
Also, the xenon headlight will have automatic adjusting which only the IS200 LE and the IS300 have, whereas the halogen headlight has manual adjusting by the little dial inside the car itself.
Dark Samurai
01-02-2019, 10:47 PM #2One has a xenon bulb as standard, one has a halogen bulb as standard...
Also, the xenon headlight will have automatic adjusting which only the IS200 LE and the IS300 have, whereas the halogen headlight has manual adjusting by the little dial inside the car itself.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
01-02-2019, 10:50 PM #3Spot on Oli!!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
P.Lindblom
02-02-2019, 12:15 AM #4Also, the HID headlight housings are a bit larger.
Here's a comparison:
![[Image: dsc7729fix.jpg]](http://img252.imageshack.us/img252/9378/dsc7729fix.jpg)
sprinter2012
02-02-2019, 05:53 AM #5As Patrik said, I think by Xenon he means HID, in which case the reflector is different internally, and as above, the casing is bigger to take the ballasts.
sprinter2012
02-02-2019, 01:27 PM #7You have to cut out a bit of the fender/wing so the ballast part of the unit will fit I think. Patrik might know as I think his were retro-fit HIDs?
el_bandido
02-02-2019, 01:55 PM #8if you are going for a retro fit, why not look in to projectors at the same time? You can just upgrade your existing lights then.
Jaminglish something like your avatar bandido? is that a retro fit?
I think his avatar is standard light units with CCFL halos fitted.
If you want HID with a flat cutoff your options are fit the IS300 lights, or fit projector lenses inside your current lights.
I'm thinking of doing it at some point, but I'm going to go for the IS300 retrofit myself as I haven't seen any projector kits that don't look 'stuck on'
sprinter2012
02-02-2019, 02:01 PM #10Jaminglish something like your avatar bandido? is that a retro fit?
I think his avatar is standard light units with CCFL halos fitted.
If you want HID with a flat cutoff your options are fit the IS300 lights, or fit projector lenses inside your current lights.
I'm thinking of doing it at some point, but I'm going to go for the IS300 retrofit myself as I haven't seen any projector kits that don't look 'stuck on'
4 Guest(s)
4 Guest(s)