Help With a Small Project
Help With a Small Project
If its from the door light then how can I trace the wires without taking the door off.
I was also thinking from the interior light but that seems like hassle too.
Any help would be great!
PS im not the best with wires.
I want to put some lighting inside the car that comes on when the doors open and off when they close, where is the easiest place to get the live and earth to acheive this.
If its from the door light then how can I trace the wires without taking the door off.
I was also thinking from the interior light but that seems like hassle too.
Any help would be great!
PS im not the best with wires.
Taking a feed from the interior light is easy enough as is the door/door switch. Depending on the type of car your installing it in lol.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
05-02-2019, 09:23 AM #4Where are you wanting these lights to be?
Taking a feed from the interior light is easy enough as is the door/door switch. Depending on the type of car your installing it in lol.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
there is a thread detailing fitting led strips in the foot wells its the same theory for getting the power to make them come on as what you are wanting to achieve
best place the is the ignition barrel lamp that comes on with the car being unlocked and doors being opened,
there is a thread detailing fitting led strips in the foot wells its the same theory for getting the power to make them come on as what you are wanting to achieve
![[Image: 308481_10150369419481712_575506711_84585...1016_n.jpg]](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/308481_10150369419481712_575506711_8458505_895731016_n.jpg)
![[Image: 381481_10150369420406712_575506711_84585...2370_n.jpg]](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/381481_10150369420406712_575506711_8458509_1002262370_n.jpg)
![[Image: is200%20catoon.jpg]](http://flq9hg.bay.livefilestore.com/y1pRfa3kPJrnHVEEHC2z47vTNROlbG9FgRzmsEz8ZJ_VKFAF-7kyMer9T68W0uCDsvklEH6MoYkQuRH5knPTs01Eg/is200%20catoon.jpg)
![[Image: 104113415648fa201e2ecb5.gif]](http://i19.photobucket.com/albums/b200/pugtop/104113415648fa201e2ecb5.gif)
![[Image: 91-bluescreen.gif]](http://www.ttp-clan.co.uk/datas/users/91-bluescreen.gif)
Well the led ring around the ignition barel has 2 wires on it I think it's inside a green sleeving due to them being led lights they will only work one way round it is very easy to do mate even without the pics.
I think I have a pic from when I did mine let me have a look
Ahh ok
Well the led ring around the ignition barel has 2 wires on it I think it's inside a green sleeving due to them being led lights they will only work one way round it is very easy to do mate even without the pics.
I think I have a pic from when I did mine let me have a look
5 Guest(s)
5 Guest(s)
Views 8,115
Last Post by
Views 2,891
Last Post by
Views 1,367
Last Post by
Views 2,602
Last Post by
Views 3,346
Last Post by
Views 782
Last Post by