supercharger Belt problems!

164

23-02-2019, 03:55 AM

#1

I fix on thing then somthing else happens!
ok so refurbed my charger, runs so much nicer, problem now is belt just destroying!
[Image: 561345_10151467736140500_574495499_23439...6557_n.jpg]

[Image: 561345_10151467736140500_574495499_23439...6557_n.jpg]

ok so running a 800 belt like i had before, got new belt after day of driving started making noise looked and had done this, so refit old belt after 5min of driving it did this! so before i refurbed was fine never did this but, affter refurbing and securing the bracket bit better noticed when i went to put the old belt on especially, that i could push the tensioner to its max before had about 2mm on left side of the bolt now non and seem when runing to be slack! on the long side i and twist the belt 180 and there is like 5-10mm bounch in the belt.

so what i want to know is, is my charger fine and will a smaller belt help 790? as i notice most of you seem to be running that anyway, but dose the belt being slack explain why it ripped? as already gone through 2 belts in 2 days dont want it to do same on the smaller belts!

I looked as it was running pully looks fine no movement noticed cuz i cut the ripped bit of a belt just to run it 4pk noticed put it in normal position as if it was a 5pk and ran it when it ran over 4-5k engine rpm it jumped forward.

just want it to be easy fix, so many things just going wrong at the min Sad

[Image: 46032_548210708527052_942106859_n.jpg]

Touge-Dreamers Facebook Page!^^^^^ Click Image!

Lookatmybiceps Progress Thread

Lexuspat
Administrator

6,827

23-02-2019, 04:02 AM

#2

i would think its to do with being slack and its slapping against itself or the pulley.

i would try the smaller belt and see what happens with it then.

just to point out i dont have a charger but as said i think it may be slack

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

[SIZE="2"]Click to visit my Project Thread or my Flickr Account[/SIZE]

OutlawJapClub Admin Team

Sparkystav
Administrator

14,683

23-02-2019, 09:42 AM

#3

Could have been a faulty belt the new one, and the old one just old and stretched?

Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.

OutlawJapClub Admin Team

lookatmybiceps
Member

164

24-02-2019, 05:29 AM

#4

ok i think my new bit of bracket has lifted the charger at the back making the belts slack, put washers on front of charger to lift it up n bring it back aligned and the 800 belt is tight like before! so will see how it goes.

Touge-Dreamers Facebook Page!^^^^^ Click Image!

Lookatmybiceps Progress Thread

Recently Browsing
3 Guest(s)