JapCarForum General Discussions The JCF Lounge Mazda 6 MPS

Mazda 6 MPS

Mazda 6 MPS

clossie
Member
196
24-06-2019, 08:07 AM
#1
Anyone had or been in one of these? Have just seen a few for sale on piston heads and for my lex plus a couple of grand I could end up with a newer more powerful + awd motor, with the same thirst for fuel.
clossie
24-06-2019, 08:07 AM #1

Anyone had or been in one of these? Have just seen a few for sale on piston heads and for my lex plus a couple of grand I could end up with a newer more powerful + awd motor, with the same thirst for fuel.

N15_GTi
Senior Member
268
24-06-2019, 08:36 AM
#2
Beautiful drive mate, I test drove one a couple of days ago as I am looking at getting one.

Powerful, practical, smooth, luxurious, AWD, reasonable economy for the performance etc...

Reviews are great as is reliability, you don't expect anything less from Jap though!

They can look amazing with a few minor touches! They perform very well! Power is always there too!

Get out and test drive one, well worth it! :-) I'm sold on it! You get ALOT of car for the money!
N15_GTi
24-06-2019, 08:36 AM #2

Beautiful drive mate, I test drove one a couple of days ago as I am looking at getting one.

Powerful, practical, smooth, luxurious, AWD, reasonable economy for the performance etc...

Reviews are great as is reliability, you don't expect anything less from Jap though!

They can look amazing with a few minor touches! They perform very well! Power is always there too!

Get out and test drive one, well worth it! :-) I'm sold on it! You get ALOT of car for the money!

DaveEdin
Posting Freak
5,657
24-06-2019, 09:59 AM
#3
I'm looking very seriously at them for purchase in the new year :biggrin:

Having a little trouble deciding between the 3 and 6 though - but as the 6 has 4WD it's edging things for me...

IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
DaveEdin
24-06-2019, 09:59 AM #3

I'm looking very seriously at them for purchase in the new year :biggrin:

Having a little trouble deciding between the 3 and 6 though - but as the 6 has 4WD it's edging things for me...


IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake

clossie
Member
196
24-06-2019, 10:06 AM
#4
Must admit its the awd which is doing it for me also. Don't really want a scooby, can't afford an Audi Quattro and whilst I know the don't exactly look exciting I'm more for performance than looks
clossie
24-06-2019, 10:06 AM #4

Must admit its the awd which is doing it for me also. Don't really want a scooby, can't afford an Audi Quattro and whilst I know the don't exactly look exciting I'm more for performance than looks

DaveEdin
Posting Freak
5,657
24-06-2019, 01:05 PM
#5
A bit of stealthy power sounds good to me :lol:

IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
DaveEdin
24-06-2019, 01:05 PM #5

A bit of stealthy power sounds good to me :lol:


IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake

Phil01
Posting Freak
2,004
24-06-2019, 01:15 PM
#6
Are you really contemplating changing your car then Dave?

1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
Phil01
24-06-2019, 01:15 PM #6

Are you really contemplating changing your car then Dave?


1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,

DaveEdin
Posting Freak
5,657
24-06-2019, 03:48 PM
#7
Phil01 Are you really contemplating changing your car then Dave?

Yep, Phil, I am... contemplating it anyway... Will see what happens in the new year, but there's not a massive amount more I want to do with the IS, and really all that's left that I'd want is more power. And if it's 5k say for a turbo conversion then I'd probably be better off using that cash to simply buy a car with more power in the first place than take the risk of problems - I'm no Stav or Ormi, anything that needed fixed or went pop would cost me bigtime... Smile

IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
DaveEdin
24-06-2019, 03:48 PM #7

Phil01 Are you really contemplating changing your car then Dave?

Yep, Phil, I am... contemplating it anyway... Will see what happens in the new year, but there's not a massive amount more I want to do with the IS, and really all that's left that I'd want is more power. And if it's 5k say for a turbo conversion then I'd probably be better off using that cash to simply buy a car with more power in the first place than take the risk of problems - I'm no Stav or Ormi, anything that needed fixed or went pop would cost me bigtime... Smile


IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake

FirebirdPhil
Posting Freak
7,101
24-06-2019, 10:59 PM
#8
A common issue is turbo oil seal failure, let the car idle for 10 mins after your test drive if it starts to smoke there is a turbo issue. Seen a couple do this.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
24-06-2019, 10:59 PM #8

A common issue is turbo oil seal failure, let the car idle for 10 mins after your test drive if it starts to smoke there is a turbo issue. Seen a couple do this.


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

dandydons
Member
167
25-06-2019, 01:28 PM
#9
I had a 3mps for a year and have test driven a couple of the 6's. Worth trying to get an early one if you can cos the tax bracket changes. Go for one registered before a certain date in March 06 (think it is the 23rd march and you will save a couple of hundred notes a year.) Check out the owners club at http://mpsowners.co.uk to read up on the turbo issues and also the vvti issue.
It is definitely a car worth considering. Understated stealthy looks and practicality of a 4 door saloon with 260bhp + AWD and a few upgrades / remaps etc to chose from.
dandydons
25-06-2019, 01:28 PM #9

I had a 3mps for a year and have test driven a couple of the 6's. Worth trying to get an early one if you can cos the tax bracket changes. Go for one registered before a certain date in March 06 (think it is the 23rd march and you will save a couple of hundred notes a year.) Check out the owners club at http://mpsowners.co.uk to read up on the turbo issues and also the vvti issue.
It is definitely a car worth considering. Understated stealthy looks and practicality of a 4 door saloon with 260bhp + AWD and a few upgrades / remaps etc to chose from.

DaveEdin
Posting Freak
5,657
25-06-2019, 02:01 PM
#10
Smile I ran a quick insurance cost check on a 6 MPS and it's about 350 cheaper than I'm currently paying for the IS :lol: so logically if there's an increase in tax cost it'd be offset a bit anyways :biggrin:

IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
DaveEdin
25-06-2019, 02:01 PM #10

Smile I ran a quick insurance cost check on a 6 MPS and it's about 350 cheaper than I'm currently paying for the IS :lol: so logically if there's an increase in tax cost it'd be offset a bit anyways :biggrin:


IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake

Recently Browsing
 3 Guest(s)
Recently Browsing
 3 Guest(s)
Related Threads…
Replies 18
Views 850
09-06-2018, 10:54 PM
Last Post by Phil01
Replies 1
Views 192
08-06-2018, 01:42 AM
Last Post by BOOSST
Replies 10
Views 476
18-06-2017, 01:05 AM
Last Post by Bobby
Replies 7
Views 314
03-11-2016, 09:15 AM
Last Post by misstxangel
Replies 3
Views 208
10-05-2016, 02:02 AM
Last Post by Lexusboy