FS Various Parts Car & Non Car Related
FS Various Parts Car & Non Car Related
Parrot AR Drone Almost New
flown a few times lots of fun but dont have the time to do it any more comes complete with LIPO charger 2 batterys and outdoor flying hull
£175 Delivered or collected at a meet
Lexus Is220D Cluster
well its a cluster from an is220D lol ideal if you wish to do the upgrade to a newer cluster was going to wire into the stagea but never got round to it
£70 Delivered or collected at a meet
Proximity Card access system
Simple system to add extra security to your car by the means of a card could install this module so that the car will lay on top with out it installed the car wont start (some additional wiring involved)
£25 Delivered or collected at a meet
SONY RM-X2S
This was going to be used with a Joycon board to control my car PC but i changed my mind lol the connector which was a mini Stereo has been cut off but this does allow you to terminate to anything you wish to control items based on a resistance value
£15 Delivered or collected at a meet
Parrot 3200LS handsfree kit missing the Mic but this is just a simple purchase from ebay was working perfectly prior to removal comes with brand new Loom to connect to a standard Car £50
Clifford avant-guard 5.5 complete system [SIZE="4"]£300 inc postage
[/SIZE]
Two Remotes Controls (5 button)
Dual-Zone Proximity Sensor
Tilt Sensor
Glass Tamper Sensor
2 Circuit Immobiliser
Smart Self-Powered Battery Backup Siren (SSPS5)
Central Door Locking and Total Closure Control
Plain-View 2 Code Protected Valet Mode/Override
ACG2 Defeats Remote "Cloning" Devices
Fact 2 (False Alarm Control & Test) Anti-Falsing Circuitry
Secure Access Full-Time Feature Customisation
Low Transmitter Battery Warning
Programming upgrades
has been carefully removed from my Nissan Stagea where is was working without fail all immobilisation wires have been re labelled ready to be installed into any car
Is this what your dash cluster looks like illuminated...?
And would it be possible to make all the dials on the IS220D dash work using the IS200 wiring as long as the right feeds were spliced?
sprinter2012 Is this what your dash cluster looks like illuminated...?
And would it be possible to make all the dials on the IS220D dash work using the IS200 wiring as long as the right feeds were spliced?
sprinter2012 Is this what your dash cluster looks like illuminated...?
And would it be possible to make all the dials on the IS220D dash work using the IS200 wiring as long as the right feeds were spliced?
That's the answer I was looking for, I hate the thought of limp dials doing nothing. So would the trip counter and temperature readouts work too then as the IS200 has those?
What's TPS? lol
And if it's been done before I'm assuming the cluster does physically fit?
sprinter2012 That's the answer I was looking for, I hate the thought of limp dials doing nothing. So would the trip counter and temperature readouts work too then as the IS200 has those?
What's TPS? lol
And if it's been done before I'm assuming the cluster does physically fit?
sprinter2012 That's the answer I was looking for, I hate the thought of limp dials doing nothing. So would the trip counter and temperature readouts work too then as the IS200 has those?
What's TPS? lol
And if it's been done before I'm assuming the cluster does physically fit?
I'd have to be certain I could get the temperature to display in that top screen though, I couldn't live with having 'Check System' on it all the time.
And I can see the rev limit being an issue, IS200 redline is 6250 I think. Redline on an IS220D is 5000.
Also, do you know if it will still do this when it starts when on another car...
[youtube]vwWCxoJiON8[/youtube]
The wiping needles is built into the dash and the temp can be displayed but at a guess of the engine check like is wired in the clock should be ok.....