JapCarForum Cars, Cars, Cars! General Car Maintenance Help

Help

Help

Pages (2): 1 2 Next
Marcus_1UZ
Senior Member
511
06-08-2020, 12:13 PM
#1
hi guys, i know its i bit of a dumb Q, IS200 what is the No 1 piston, is it the one at the front or the one at the back??:confused:

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
06-08-2020, 12:13 PM #1

hi guys, i know its i bit of a dumb Q, IS200 what is the No 1 piston, is it the one at the front or the one at the back??:confused:


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

Chaos
Member
50
06-08-2020, 12:25 PM
#2
The one at the front mate, not a dumb question none of us was born knowing
HTH
Chaos
06-08-2020, 12:25 PM #2

The one at the front mate, not a dumb question none of us was born knowing
HTH

Marcus_1UZ
Senior Member
511
06-08-2020, 12:45 PM
#3
thanks mate

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
06-08-2020, 12:45 PM #3

thanks mate


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

Marcus_1UZ
Senior Member
511
06-08-2020, 12:49 PM
#4
ok next Q how do i make sute it TDC by lineing up the bottom pulley with the mark on the cover, but i have 2 marks on the big pulley???

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
06-08-2020, 12:49 PM #4

ok next Q how do i make sute it TDC by lineing up the bottom pulley with the mark on the cover, but i have 2 marks on the big pulley???


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

Chaos
Member
50
06-08-2020, 01:16 PM
#5
If turning the pulley clockwise the 1st mark to line up is 60 degrees before TDC (this is the mark for doing a timing belt change) the second mark is TDC.
Chaos
06-08-2020, 01:16 PM #5

If turning the pulley clockwise the 1st mark to line up is 60 degrees before TDC (this is the mark for doing a timing belt change) the second mark is TDC.

Marcus_1UZ
Senior Member
511
06-08-2020, 01:52 PM
#6
thanks just as well i asked

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
06-08-2020, 01:52 PM #6

thanks just as well i asked


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

Sparkystav
Administrator
14,683
06-08-2020, 01:56 PM
#7
Why do you change it at 60 degrees before tdc?

OutlawJapClub Admin Team
Sparkystav
06-08-2020, 01:56 PM #7

Why do you change it at 60 degrees before tdc?


OutlawJapClub Admin Team

jomo
Senior Member
709
06-08-2020, 02:56 PM
#8
He lives on a steep hill!

[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]
jomo
06-08-2020, 02:56 PM #8

He lives on a steep hill!


[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]

Chaos
Member
50
06-08-2020, 03:17 PM
#9
Sparkystav Why do you change it at 60 degrees before tdc?

I have no idea why as there are marks for both but mailnly coz thats what the "Autodata" cambelt book says :biggrin:

Also on this guide which I beleive is from the original worksop manual

http://bahamutcars.free.fr/workshop/IS_9...m_0020.pdf

HTH
Chaos
06-08-2020, 03:17 PM #9

Sparkystav Why do you change it at 60 degrees before tdc?

I have no idea why as there are marks for both but mailnly coz thats what the "Autodata" cambelt book says :biggrin:

Also on this guide which I beleive is from the original worksop manual

http://bahamutcars.free.fr/workshop/IS_9...m_0020.pdf

HTH

Sparkystav
Administrator
14,683
06-08-2020, 03:32 PM
#10
Ah I bet it has something to do with the vvti and the single pully to 2 cams setup.

OutlawJapClub Admin Team
Sparkystav
06-08-2020, 03:32 PM #10

Ah I bet it has something to do with the vvti and the single pully to 2 cams setup.


OutlawJapClub Admin Team

Pages (2): 1 2 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)