SC Induction Pipework
SC Induction Pipework
for the pipework in guessing you need a 180 bend off the charger, a 45 bend and some straight pipe?
cheers
JJ
JayJay1374
15-09-2019, 01:44 AM #1Has anyone got pictures of their supercharger with an induction kit fitted?
for the pipework in guessing you need a 180 bend off the charger, a 45 bend and some straight pipe?
cheers
JJ
Used a 63mm 180 degree silicone bend and a silicone step up for the Apexi air filter, and a chrome 60mm table leg from B&Q, as it worked out a lot cheaper than buying a length of stainless :tongue_smilie:
![[Image: DSCF1566.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/My%20Lexus%20Supercharged%20Lexus%20IS200/DSCF1566.jpg)
Can just see the breather filter on this pic,
![[Image: lexenginebay2ndOct2010.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/My%20Lexus%20Supercharged%20Lexus%20IS200/lexenginebay2ndOct2010.jpg)
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
This was the one i made for mine, and just added a small breather filter to the rocker breather pipe, could always link it to the pipe though with a t-piece?
Used a 63mm 180 degree silicone bend and a silicone step up for the Apexi air filter, and a chrome 60mm table leg from B&Q, as it worked out a lot cheaper than buying a length of stainless :tongue_smilie:
Can just see the breather filter on this pic,
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
JayJay1374 so where do you mount the airflow sensor?
Airflow sensor? You mean that little black sensor that used to be in the OEM airbox? That's actually inlet air temperature, and ideally needs to be close to the throttle body to give an accurate measurement, but tbh it makes naff all difference.
sprinter2012
18-09-2019, 07:46 AM #8JayJay1374 so where do you mount the airflow sensor?
Airflow sensor? You mean that little black sensor that used to be in the OEM airbox? That's actually inlet air temperature, and ideally needs to be close to the throttle body to give an accurate measurement, but tbh it makes naff all difference.
sprinter2012 Airflow sensor? You mean that little black sensor that used to be in the OEM airbox? That's actually inlet air temperature, and ideally needs to be close to the throttle body to give an accurate measurement, but tbh it makes naff all difference.
I had mine fitted next to the air filter.
LEXUS IS200 - The most fun car to go sideways
sprinter2012 Airflow sensor? You mean that little black sensor that used to be in the OEM airbox? That's actually inlet air temperature, and ideally needs to be close to the throttle body to give an accurate measurement, but tbh it makes naff all difference.
I had mine fitted next to the air filter.
LEXUS IS200 - The most fun car to go sideways
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Had mine pushed into the bottom of the silicone T piece, where the blow off valve is on the pic's above, just make sure you seal the fitting so it doesn't leak pressure! shouldn't have to extend the original wiring that way either?
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
2 Guest(s)
2 Guest(s)