Stix's IS200
Stix's IS200
07-12-2019, 02:39 PM
Stix44 Smelly care package!
![[Image: IMAG0218_BURST001.jpg]](http://i77.photobucket.com/albums/j60/dopple-ganger/IMAG0218_BURST001.jpg)
I friggin love the blue one of those. Smells sooooooooooooooooooooooooooooooo nice.
Also, has anyone with an SC considered an air to water intercooler in the intake manifold, like the v8 supercharger kits have?
Edited 18-01-2013, 12:14 AM by el_bandido.
el_bandido
07-12-2019, 02:39 PM #271Stix44 Smelly care package!
I friggin love the blue one of those. Smells sooooooooooooooooooooooooooooooo nice.
Also, has anyone with an SC considered an air to water intercooler in the intake manifold, like the v8 supercharger kits have?
08-12-2019, 12:07 AM
el_bandido I friggin love the blue one of those. Smells sooooooooooooooooooooooooooooooo nice.
Also, has anyone with an SC considered an air to water intercooler in the intake manifold, like the v8 supercharger kits have?
I love jelly bellys too! Ill get a pic of my current collection.
I've looked into charge coolers (admittedly not in the intake manifold) and from what I've read they are only really any good for drag racing because while water is faster to "take" heat it is much slower to "give it up" so they are only effective in short bursts.
someone can correct me if I'm wrong but that was my reading of charge coolers.
plus the plumbing would probably be a nightmare!
el_bandido I friggin love the blue one of those. Smells sooooooooooooooooooooooooooooooo nice.
Also, has anyone with an SC considered an air to water intercooler in the intake manifold, like the v8 supercharger kits have?
I love jelly bellys too! Ill get a pic of my current collection.
I've looked into charge coolers (admittedly not in the intake manifold) and from what I've read they are only really any good for drag racing because while water is faster to "take" heat it is much slower to "give it up" so they are only effective in short bursts.
someone can correct me if I'm wrong but that was my reading of charge coolers.
plus the plumbing would probably be a nightmare!
08-12-2019, 02:05 AM
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
08-12-2019, 02:05 AM #274I was under the same impression as you stix to be honest.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
08-12-2019, 03:10 AM
I'll have to try it out when I've got ridiculous amounts of spare money
el_bandido
08-12-2019, 03:10 AM #275Fair enough, water has a pretty good heat capacity, I just reckon you'd need a good pump and a decent enough surface area in the intake. Just wondered, a lot of the supercharged v8s and people like Stillen seem to prefer it, as the temps drop right down.
I'll have to try it out when I've got ridiculous amounts of spare money
08-12-2019, 04:20 AM
I've had a think on the train to work and a small IC inbetween the SC and the collector would be do-able (although it would be tiny) and if you just plumbed it into the engine cooling system and mabee added a cooler opening thermostat it might reduce temps enough to be worth it.
08-12-2019, 05:54 AM
I'm only throwing ideas about anyway, been reading up on supercharging a lot lately as I'm past everything else in design stage for v8 stuff. Has anyone tried a centrifugal supercharger on the 1g engine?
el_bandido
08-12-2019, 05:54 AM #277Yeah I was just having a few thoughts about how to keep the intake temperatures really low so you could push the boost higher without blowing up. It should be more efficient than air to air, provided the radiator you attach it to at the front of the car is big enough.
I'm only throwing ideas about anyway, been reading up on supercharging a lot lately as I'm past everything else in design stage for v8 stuff. Has anyone tried a centrifugal supercharger on the 1g engine?
08-12-2019, 06:14 AM
Also the 1ggze is a centrifugal charger.
Back to the charge cooler, would water/meth injection not be a simpler ,ethos to cool the intake temps.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
08-12-2019, 06:14 AM #278Yeah Dave used to have a rotrex on his before he went turbo.
Also the 1ggze is a centrifugal charger.
Back to the charge cooler, would water/meth injection not be a simpler ,ethos to cool the intake temps.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
08-12-2019, 06:31 AM
Stix44 I love jelly bellys too! Ill get a pic of my current collection.
I've looked into charge coolers (admittedly not in the intake manifold) and from what I've read they are only really any good for drag racing because while water is faster to "take" heat it is much slower to "give it up" so they are only effective in short bursts.
someone can correct me if I'm wrong but that was my reading of charge coolers.
plus the plumbing would probably be a nightmare!
Happy to correct you
You don't use water in a chargecooler system, you use coolant. Ethylene glycol is good at releasing heat in a radiator system, but it wil also immediately heatsink itself, so all the other cooled coolant in the system is constantly cooling the bit that's just come out of the chargecooler core and is hot. With a efficient radiator, it's miles better at cooling your intake charge than an air to air cooler. This is why Toyota used them on stock motors that generated high boost pressure (and why Jaguar, Aston etc still use them today). A chargecooler was used in preference to air to air on the homologated GT4 ST205 and the system is identical on the actually rallygoing car. It's that good, it's used in WRC.It is important to match pump size and pressure to the core though, you want the coolant in there long enough to take on as much heat as possible without affecting the efficiency of the core - too fast and it won't take enough heat out, and too slow and you'll lose the benefits over an air to air cooler.
They also basically eliminate heatsoak with decent pump management. It takes ages to cool down an intercooler once it's got properly hot.
The plumbing of one would be a sinch compared to the one I installed on my MR2... radiator at the front, engine in the middle
Edited 18-01-2013, 04:07 PM by toxo.
Stix44 I love jelly bellys too! Ill get a pic of my current collection.
I've looked into charge coolers (admittedly not in the intake manifold) and from what I've read they are only really any good for drag racing because while water is faster to "take" heat it is much slower to "give it up" so they are only effective in short bursts.
someone can correct me if I'm wrong but that was my reading of charge coolers.
plus the plumbing would probably be a nightmare!
Happy to correct you
You don't use water in a chargecooler system, you use coolant. Ethylene glycol is good at releasing heat in a radiator system, but it wil also immediately heatsink itself, so all the other cooled coolant in the system is constantly cooling the bit that's just come out of the chargecooler core and is hot. With a efficient radiator, it's miles better at cooling your intake charge than an air to air cooler. This is why Toyota used them on stock motors that generated high boost pressure (and why Jaguar, Aston etc still use them today). A chargecooler was used in preference to air to air on the homologated GT4 ST205 and the system is identical on the actually rallygoing car. It's that good, it's used in WRC.It is important to match pump size and pressure to the core though, you want the coolant in there long enough to take on as much heat as possible without affecting the efficiency of the core - too fast and it won't take enough heat out, and too slow and you'll lose the benefits over an air to air cooler.
They also basically eliminate heatsoak with decent pump management. It takes ages to cool down an intercooler once it's got properly hot.
The plumbing of one would be a sinch compared to the one I installed on my MR2... radiator at the front, engine in the middle
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 1,312
Views 102,696
Views 102,696
25-03-2024, 02:10 AM
Last Post byZAIS200
Last Post by
Replies 1,341
Views 67,558
Views 67,558
08-02-2024, 01:53 AM
Last Post byWayne
Last Post by
Replies 4
Views 404
Views 404
18-12-2023, 02:55 AM
Last Post byRabster
Last Post by
Replies 20
Views 1,469
Views 1,469
08-10-2023, 03:59 AM
Last Post byWayne
Last Post by
Replies 42
Views 3,125
Views 3,125
04-10-2023, 03:52 PM
Last Post byWayne
Last Post by
Replies 28
Views 1,927
Views 1,927
17-05-2023, 11:25 AM
Last Post byIS200_rider
Last Post by